ISO 15397:2014
Current
Current
The latest, up-to-date edition.
Graphic technology — Communication of graphic paper properties
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-03-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 15397:2014 specifies the list of relevant properties of paper substrates to be communicated between the paper and printing industries.
ISO 15397:2014 is applicable to papers intended to be printed in rotogravure, cold-set web offset, heat-set web offset, sheet-fed offset, and flexographic printing processes and to proofing substrates.
| Committee |
ISO/TC 130
|
| DevelopmentNote |
Supersedes ISO/DIS 15397. (02/2014)
|
| DocumentType |
Standard
|
| Pages |
12
|
| ProductNote |
THIS STANDARD ALSO REFERS TO CIE 15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NEN ISO 15397 : 2014 | Identical |
| BS ISO 15397:2014 | Identical |
| NF ISO 15397 : 2014 | Identical |
| PD ISO/TS 15311-1:2016 | Graphic technology. Requirements for printed matter for commercial and industrial production Measurement methods and reporting schema |
| 16/30309800 DC : 0 | BS ISO 12647-7 - GRAPHIC TECHNOLOGY - PROCESS CONTROL FOR THE PRODUCTION OF HALF-TONE COLOUR SEPARATIONS, PROOF AND PRODUCTION PRINTS - PART 7: PROOFING PROCESSES WORKING DIRECTLY FROM DIGITAL DATA |
| ISO 12647-1:2013 | Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods |
| ISO/TS 15311-1:2016 | Graphic technology Requirements for printed matter for commercial and industrial production Part 1: Measurement methods and reporting schema |
| ISO 12647-3:2013 | Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint |
| BS ISO 12647-7:2016 | Graphic technology. Process control for the production of halftone colour separations, proof and production prints Proofing processes working directly from digital data |
| UNE-ISO 12647-1:2015 | Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 1: Parameters and measurement methods. |
| BS ISO 12647-3:2013 | Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints Coldset offset lithography on newsprint |
| ISO 12647-7:2016 | Graphic technology Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly from digital data |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| BS ISO 12647-1:2013 | Graphic technology. Process control for the production of half-tone colour separations, proof and production prints Parameters and measurement methods |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| UNE-ISO 12647-3:2015 | Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Part 3: Coldset offset lithography on newsprint. |
| ISO 2493-1:2010 | Paper and board Determination of bending resistance Part 1: Constant rate of deflection |
| ISO 8254-1:2009 | Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
| ISO 11476:2016 | Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| ISO 8791-4:2007 | Paper and board Determination of roughness/smoothness (air leak methods) Part 4: Print-surf method |
| ISO 8254-2:2016 | Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 5628:2012 | Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| ISO 5627:1995 | Paper and board — Determination of smoothness (Bekk method) |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 11475:2017 | Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) |
| ISO 2470-2:2008 | Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness) |
| ISO 5631-2:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 3664:2009 | Graphic technology and photography Viewing conditions |
| ISO 8791-2:2013 | Paper and board — Determination of roughness/smoothness (air leak methods) — Part 2: Bendtsen method |
| ISO 13655:2017 | Graphic technology — Spectral measurement and colorimetric computation for graphic arts images |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ISO 8254-3:2016 | Paper and board Measurement of specular gloss Part 3: 20 degree gloss with a converging beam, TAPPI method |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 12647-7:2016 | Graphic technology Process control for the production of halftone colour separations, proof and production prints Part 7: Proofing processes working directly from digital data |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.