ISO 15197:2013
Current
Current
The latest, up-to-date edition.
In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
05-14-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 15197:2013 specifies requirements for in vitro glucose monitoring systems that measure glucose concentrations in capillary blood samples, for specific design verification procedures and for the validation of performance by the intended users. These systems are intended for self-measurement by lay persons for management of diabetes mellitus.
ISO 15197:2013 is applicable to manufacturers of such systems and those other organizations (e.g. regulatory authorities and conformity assessment bodies) having the responsibility for assessing the performance of these systems.
| Committee |
ISO/TC 212
|
| DevelopmentNote |
Supersedes ISO/DIS 15197. (05/2013)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| GOST ISO 15197 : 2011 | Identical |
| UNE-EN ISO 15197:2015 | Identical |
| NF EN ISO 15197 : 2015 | Identical |
| NBN EN ISO 15197 : 2015 | Identical |
| NEN EN ISO 15197 : 2015 | Identical |
| NS EN ISO 15197 : 2015 | Identical |
| I.S. EN ISO 15197:2015 | Identical |
| PN EN ISO 15197 : 2015 | Identical |
| SN EN ISO 15197 : 2015 | Identical |
| UNI EN ISO 15197 : 2013 | Identical |
| SS-EN ISO 15197:2016 | Identical |
| BIS IS/ISO 15197 : 2013 | Identical |
| BS EN ISO 15197:2015 | Identical |
| EN ISO 15197:2015 | Identical |
| CSA ISO 15197 : 2015 | Identical |
| DIN EN ISO 15197:2015-12 | Identical |
| CSA ISO 15197:15 (R2020) | Identical |
| BS EN ISO 15197:2013 | Identical |
| UNE-EN ISO 15197:2013 | Identical |
| GOST R ISO 15197 : 2009 | Identical |
| UNI EN ISO 18113-5 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF- TESTING |
| CSA ISO 14971 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| ISO 16142-2:2017 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| UNI EN ISO 18113-4 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 4: IN VITRO DIAGNOSTIC REAGENTS FOR SELF-TESTING |
| AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| UNE-EN ISO 18113-5:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009) |
| ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| 06/30146526 DC : 0 | BS ISO 18113-5 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING |
| UNE-EN ISO 18113-4:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009) |
| BS EN ISO 18113-4:2011 | In vitro diagnostic medical Devices. Information supplied by the manufacturer (labelling) In vitro diagnostic reagents for self-testing |
| ANSI/AAMI/ISO 16142-2:2017 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| I.S. EN ISO 14971:2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01) |
| DIN EN ISO 14971:2013-04 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007) |
| BS ISO 16142-2:2017 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
| DIN EN ISO 18113-5:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009) |
| BS EN ISO 14971:2012 | Medical devices. Application of risk management to medical devices |
| CEI UNI EN ISO 14971 : 2013 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| BS EN ISO 18113-5:2011 | In vitro diagnostic medical Devices. Information supplied by the manufacturer (labelling) In vitro diagnostic instruments for self-testing |
| 06/30146511 DC : 0 | BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| UNI CEI EN ISO 14971 : 2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| AAMI ISO 14971 : 2007 : R2010 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| I.S. EN ISO 18113-4:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 4: IN VITRO DIAGNOSTIC REAGENTS FOR SELF-TESTING (ISO 18113-4:2009) |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| ISO 18113-4:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 4: In vitro diagnostic reagents for self-testing |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| EN ISO 18113-5:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009) |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| DIN EN ISO 18113-4:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009) |
| DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| BS ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| CSA ISO 14971 : 2007 : R2017 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| CSA ISO 14971 : 2007 : R2012 | MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES |
| I.S. EN ISO 18113-5:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 5: IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING (ISO 18113-5:2009) |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| ISO 18113-5:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 5: In vitro diagnostic instruments for self-testing |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| IEC 61326-2-6:2012 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| EN 61326-2-6:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
| ISO 18113-4:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 4: In vitro diagnostic reagents for self-testing |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| ISO 23640:2011 | In vitro diagnostic medical devices — Evaluation of stability of in vitro diagnostic reagents |
| ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
| EN ISO 23640:2015 | In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) |
| EN 62366 : 2008 AMD 1 2015 | MEDICAL DEVICES - APPLICATION OF USABILITY ENGINEERING TO MEDICAL DEVICES (IEC 62366:2007/A1:2014) |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| EN ISO 14971:2012 | Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 18113-5:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 5: In vitro diagnostic instruments for self-testing |
| EN ISO 18113-5:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009) |
| EN 61010-2-101:2017 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
| CLSI EP7 A2 : 2ED 2005 | INTERFERENCE TESTING IN CLINICAL CHEMISTRY |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| CLSI EP9 A2 : 2ED 2002 | METHOD COMPARISON AND BIAS ESTIMATION USING PATIENT SAMPLES |
| EN ISO 17511:2003 | In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials (ISO 17511:2003) |
| CLSI EP30 A : 1ED 2010 | CHARACTERIZATION AND QUALIFICATION OF COMMUTABLE REFERENCE MATERIALS FOR LABORATORY MEDICINE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.