ISO 15186-2:2003
Current
The latest, up-to-date edition.
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 2: Field measurements
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
06-11-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 15186-2:2003 specifies a sound intensity method to determine the in-situ sound insulation of walls, floors, doors, windows and small building elements. It is intended for measurements that have to be made in the presence of flanking transmission. It can be used to provide sound power data for diagnostic analysis of flanking transmission or to measure flanking sound insulation parameters.
ISO 15186-2:2003 can be used by laboratories that could not satisfy the requirements of ISO 15186-1, which deals with laboratory measurements with no or little flanking transmission. ISO 15186-3 deals with measurements under laboratory conditions, at low frequencies.
ISO 15186-2:2003 also describes the effect of flanking transmission on measurements made using the specified method, and how intensity measurements can be used
-- to compare the in-situ sound insulation of a building element with laboratory measurements where flanking has been suppressed (i.e. ISO 140-3),
-- to rank the partial contributions for building elements, and
-- to measure the flanking sound reduction index for one or more transmission paths (for validation of prediction models such as those given in EN 12354-1).
This method gives values for airborne sound insulation, which are frequency dependent. They can be converted into a single number, characterizing the acoustic performance, by application of ISO 717-1.
The reproducibility of this intensity method is estimated to be equal to or better than that of the methods of ISO 140-10 and ISO 140-4, when measuring a single small and large building element, respectively.
| DevelopmentNote |
Supersedes ISO/DIS 15186-2 (06/2003)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 15186-2 : 2011 | Identical |
| NBN EN ISO 15186-2 : 2010 | Identical |
| NEN ISO 15186-2 : 2003 | Identical |
| NEN EN ISO 15186-2 : 2010 | Identical |
| NS EN ISO 15186-2 : 1ED 2010 | Identical |
| I.S. EN ISO 15186-2:2010 | Identical |
| PN EN ISO 15186-2 : 2011 | Identical |
| SAC GB/T 31004-2 : 2014 | Identical |
| SN EN ISO 15186-2 : 2010 | Identical |
| SS-EN ISO 15186-2 : 2010 | Identical |
| UNE-EN ISO 15186-2:2011 | Identical |
| BS EN ISO 15186-2:2010 | Identical |
| EN ISO 15186-2:2010 | Identical |
| DIN EN ISO 15186-2:2010-12 | Identical |
| BS ISO 15186-2 : 2003 | Identical |
| PD CEN/TR 15226:2006 | Building products. Treatment of acoustics in product technical specifications |
| ISO 10848-3:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence |
| EN ISO 10848-3:2017 | Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the junction has a substantial influence (ISO 10848-3:2017) |
| BS EN ISO 10848-3:2017 | Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Application to Type B elements when the junction has a substantial influence |
| I.S. CEN/TR 15226:2006 | BUILDING PRODUCTS - TREATMENT OF ACOUSTICS IN PRODUCT TECHNICAL SPECIFICATIONS |
| ASTM E 2249 : 2002 : R2008 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity |
| DIN EN ISO 140-14:2004-11 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 14: GUIDELINES FOR SPECIAL SITUATIONS IN THE FIELD |
| CEN/TR 15226:2006 | Building products - Treatment of acoustics in product technical specifications |
| ASTM E 2249 : 2002 : R2016 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity |
| VDI 3762:2012-01 | Sound insulation by means of raised access floors and hollow floors |
| I.S. EN ISO 140-14:2004 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 14: GUIDELINES FOR SPECIAL SITUATIONS IN THE FIELD |
| I.S. EN ISO 10848-3:2017 | ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING RMS - PART 3: APPLICATION TO TYPE B ELEMENTS WHEN THE JUNCTION HAS A SUBSTANTIAL INFLUENCE (ISO 10848-3:2017) |
| UNI TR 11326 : 2009 | Acoustics - Evaluation of the uncertainty of measurements and calculations in acoustics - Parte 1: General concepts |
| UNI 11367 : 2010 | BUILDING ACOUSTICS - ACOUSTIC CLASSIFICATION OF BUILDING UNITS - EVALUATION PROCEDURE AND IN SITU MEASUREMENTS |
| ASTM E 2249 : 2002 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity |
| ISO 140-14:2004 | Acoustics Measurement of sound insulation in buildings and of building elements Part 14: Guidelines for special situations in the field |
| BS EN ISO 140-14:2004 | Acoustics. Measurement of sound insulation in buildings and of building elements Guidelines for special situations in the field |
| ISO 140-10:1991 | Acoustics Measurement of sound insulation in buildings and of building elements Part 10: Laboratory measurement of airborne sound insulation of small building elements |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| IEC 61043:1993 | Electroacoustics - Instruments for the measurement of sound intensity - Measurements with pairs of pressure sensing microphones |
| ISO 140-3:1995 | Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements |
| ISO 9614-2:1996 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning |
| EN 12354-1:2000 | Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms |
| ISO 140-1:1997 | Acoustics Measurement of sound insulation in buildings and of building elements Part 1: Requirements for laboratory test facilities with suppressed flanking transmission |
| ISO 140-4:1998 | Acoustics Measurement of sound insulation in buildings and of building elements Part 4: Field measurements of airborne sound insulation between rooms |
| ISO 9614-3:2002 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 3: Precision method for measurement by scanning |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.