ISO 14341:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
08-24-2020
Superseded by
Language(s)
French, English
Published date
02-15-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 14341:2010 specifies requirements for classification of wire electrodes and weld deposits in the as-welded condition and in the post-weld heat-treated condition for gas shielded metal arc welding of non alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. One wire electrode can be tested and classified with different shielding gases.
ISO 14341:2010 constitutes a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.
Clauses and tables which carry the suffix letter A are applicable only to wire electrodes classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with ISO 14341:2010.
Clauses and tables which carry the suffix letter B are applicable only to wire electrodes classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with ISO 14341:2010.
Clauses and tables which have neither the suffix letter A nor the suffix letter B are applicable to all wire electrodes classified in accordance with ISO 14341:2010.
| DevelopmentNote |
Supersedes ISO/DIS 14341. (02/2010)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 14341 : 2011 | Identical |
| NF EN ISO 14341 : 2011 | Identical |
| NBN EN ISO 14341 : 2011 | Identical |
| NEN EN ISO 14341 : 2011 | Identical |
| NS EN ISO 14341 : 2011 | Identical |
| PN EN ISO 14341 : 2011 | Identical |
| SN EN ISO 14341 : 2011 | Identical |
| UNI EN ISO 14341 : 2011 | Identical |
| SS-EN ISO 14341:2011 | Identical |
| UNE-EN ISO 14341:2011 | Identical |
| BS EN ISO 14341:2011 | Identical |
| EN ISO 14341:2011 | Identical |
| DIN EN ISO 14341:2011-04 | Identical |
| CSA ISO 14341 : 2011 | Identical |
| CSA ISO 14341:11 (R2021) | Identical |
| I.S. EN ISO 14341:2011 | Identical |
| CSA ISO 14341 : 2011 : R2016 | Identical |
| 14/30312130 DC : 0 | BS EN 13479 - WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| BS EN ISO 15012-4:2016 | Health and safety in welding and allied processes. Equipment for capture and separation of welding fume General requirements |
| UNI EN 4632-003 : 2011 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| PREN 13479 : DRAFT 2014 | WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| BS EN 15594:2009 | Railway applications. Track. Restoration of rails by electric arc welding |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| DIN EN 12732:2014-07 | Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
| BS EN 12699:2015 | Execution of special geotechnical works. Displacement piles |
| I.S. EN 12699:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
| I.S. EN 14199:2015 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES |
| EN 12952-2:2011 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 13479:2017 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
| UNI EN 12732 : 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| 11/30050625 DC : 0 | BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED, BRAZED AND SOLDERED JOINTS |
| DIN EN ISO 2553:2014-04 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013) |
| DIN EN 15594:2009-08 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 16/30336476 DC : 0 | BS EN 287-6 - QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 16/30336473 DC : 0 | BS EN 1011-8 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| I.S. EN 1011-8:2004 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS |
| UNI EN ISO 2553 : 2014 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 12699:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DISPLACEMENT PILES |
| DIN EN ISO 1071:2016-05 | WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION (ISO 1071:2015) |
| DIN EN 14199:2015-07 | EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES |
| UNE-EN 13479:2018 | Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
| UNE-EN ISO 1071:2016 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) |
| I.S. EN ISO 15012-1:2013 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013) |
| I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN ISO 1071:2015 | WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION (ISO 1071:2015) |
| I.S. EN 13479:2017 | WELDING CONSUMABLES - GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION WELDING OF METALLIC MATERIALS |
| I.S. EN 12952-2:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| DIN EN 12732:2000-09 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| UNI EN ISO 15012-1 : 2013 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY |
| BS EN ISO 2553:2013 | Welding and allied processes. Symbolic representation on drawings. Welded joints |
| PREN 1011-8 : DRAFT 2016 | WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 8: WELDING OF CAST IRONS |
| 16/30342040 DC : 0 | BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION |
| PREN 287-6 : DRAFT 2016 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| I.S. EN 4632-003:2010 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 287-6:2016-03 (Draft) | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| DIN EN ISO 15012-1:2013-08 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 15012-4:2016 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) |
| UNI EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| UNI EN 15594 : 2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| BS EN 4632-003:2010 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| I.S. EN ISO 2553:2013 | WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS (ISO 2553:2013) |
| ISO 2553:2013 | Welding and allied processes Symbolic representation on drawings Welded joints |
| BS EN ISO 9606-1:2017 | Qualification testing of welders. Fusion welding Steels |
| I.S. EN 287-6:2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| UNI EN 287-6 : 2010 | QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 6: CAST IRON |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 2553:2013 | Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013) |
| EN 287-6:2018 | Qualification test of welders - Fusion welding - Part 6: Cast irons |
| ISO 1071:2015 | Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification |
| ISO 15012-4:2016 | Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 4: General requirements |
| BS EN 13479:2017 | Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials |
| BS EN 1011-8:2004 | Welding. Recommendations for welding of metallic materials Welding of cast irons |
| UNE-EN 12952-2:2012 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| UNE-EN ISO 2553:2014 | Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013) |
| UNE-EN ISO 15012-1:2013 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| BS EN ISO 15012-1:2013 | Health and safety in welding and allied processes. Equipment for capture and separation of welding fume Requirements for testing and marking of separation efficiency |
| BS EN 12732 : 2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| UNE-EN 12732:2014+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| EN 15594:2009 | Railway applications - Track - Restoration of rails by electric arc welding |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| ONORM EN 12732 : JUL 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| EN ISO 1071:2015 | Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) |
| EN 14199:2015 | Execution of special geotechnical works - Micropiles |
| EN 4632-003:2010 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels |
| EN ISO 15012-1:2013 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| 14/30287678 DC : 0 | BS EN ISO 1071 - WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION |
| 17/30353044 DC : 0 | BS EN ISO 2553 - WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS |
| ISO/TR 17671-6:2005 | Welding Recommendations for welding of metallic materials Part 6: Laser beam welding |
| UNE-EN 15594:2010 | Railway applications - Track - Restoration of rails by electric arc welding |
| I.S. EN ISO 9606-1:2017 | QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS (ISO 9606-1:2012 INCLUDING COR 1:2012 AND COR 2:2013) |
| I.S. EN ISO 15012-4:2016 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016) |
| I.S. EN 15594:2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| EN 1011-8:2018 | Welding - Recommendations for welding of metallic materials - Part 8: Welding of cast irons |
| DIN EN 12952-2:2011-10 | Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
| BS EN ISO 1071:2015 | Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification |
| BS EN 12952-2:2011 | Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
| BS EN 14199:2015 | Execution of special geotechnical works. Micropiles |
| ISO 15012-1:2013 | Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 1: Requirements for testing and marking of separation efficiency |
| ONORM EN 12952-2 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
| EN 12699:2015 | Execution of special geotechnical works - Displacement piles |
| EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| UNE-EN 12732:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| ISO 544:2011 | Welding consumables Technical delivery conditions for filler materials and fluxes Type of product, dimensions, tolerances and markings |
| ISO 14344:2010 | Welding consumables — Procurement of filler materials and fluxes |
| ISO 15792-1:2000 | Welding consumables Test methods Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 14175:2008 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
| ISO 13916:2017 | Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.