ISO 14253-1:2017
Current
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
10-31-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 14253-1:2017 establishes the rules for verifying the conformity or nonconformity with a given tolerance for a characteristic of a workpiece (or a population of workpieces) or with a given maximum permissible errors for a metrological characteristic of a measuring equipment, including when the measured value falls close to the specification limits, taking measurement uncertainty into account.
ISO 14253-1:2017 applies to specifications defined in general GPS standards (see ISO 14638), i.e. standards prepared by ISO/TC 213, including:
- workpiece specifications and population specifications (usually given as an upper specification limit or a lower specification limit or both);
- measuring equipment specifications (usually given as maximum permissible errors).
ISO 14253-1:2017 only applies for characteristics and maximum permissible errors expressed as quantity values.
| Committee |
ISO/TC 213
|
| DevelopmentNote |
Supersedes ISO/DIS 14253-1. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-EN ISO 14253-1:2017 | Identical |
| ÖNORM EN ISO 14253-1:2018 | Identical |
| UNI EN ISO 14253-1 :2018 | Identical |
| PN-EN ISO 14253-1:2018-02 | Identical |
| BS EN ISO 14253-1:2013 | Identical |
| NEN EN ISO 14253-1 : 2018 | Identical |
| EN ISO 14253-1:2017 | Identical |
| UNI EN ISO 14253-1 : 2013 | Identical |
| NF EN ISO 14253-1 : 2017 | Identical |
| I.S. EN ISO 14253-1:2017 | Identical |
| SN EN ISO 14253-1:2018 | Identical |
| DIN EN ISO 14253-1:2018-07 | Identical |
| UNE-EN ISO 14253-1:2019 | Identical |
| IS 15371 : Part 1 : 2023 | Identical |
| NS EN ISO 14253-1 : 2017 | Identical |
| BIS IS 15371-1 : 2003 | Identical |
| DIN EN ISO 14253-1:2013-12 | Identical |
| NBN EN ISO 14253-1 : 2013 | Identical |
| BS EN ISO 14253-1:2017 | Identical |
| UNE-EN ISO 16610-85:2013 | Equivalent |
| ONORM EN ISO 14253-1 : 2014 | Identical |
| UNE-EN ISO 14253-1:2015 | Identical |
| SN EN ISO 14253-1 : 2013 | Identical |
| DIN 874-1:2003-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 1: STEEL STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS |
| PD CEN/TR 15235:2005 | Welding. Methods for assessing imperfections in metallic structures |
| DIN EN ISO 16610-85:2013-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
| UNE-EN ISO 10360-8:2017 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013) |
| I.S. EN ISO 25178-3:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS (ISO 25178-3:2012) |
| UNI EN ISO 10360-8 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS |
| UNI EN ISO 12781-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
| BS EN ISO 2538-2:2014 | Geometrical product specifications (GPS). Wedges Dimensioning and tolerancing |
| 14/30272942 DC : 0 | BS EN ISO 18391 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - POPULATION SPECIFICATION |
| ISO 17450-4:2017 | Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations |
| BS EN ISO 14253-2:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| DIN EN ISO 16610-21:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
| 08/30176399 DC : DRAFT JAN 2008 | BS ISO 26303-1 - MACHINE TOOLS - RELIABILITY, AVAILABILITY AND CAPABILITY - PART 1: CAPABILITY EVALUATION OF MACHINING PROCESSES ON METAL-CUTTING MACHINE TOOLS |
| BS EN ISO 12780-1:2011 | Geometrical product specifications (GPS). Straightness Vocabulary and parameters of straightness |
| OIML G 1-106 : 2012 | EVALUATION OF MEASUREMENT DATA - THE ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| BS EN ISO 12781-2:2011 | Geometrical product specifications (GPS). Flatness Specification operators |
| 08/30192855 DC : 0 | BS ISO 5-4 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 4: GEOMETRIC CONDITIONS FOR REFLECTION DENSITY |
| BS EN ISO 25178-604:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| BS EN ISO 12780-2:2011 | Geometrical product specifications (GPS). Straightness Specification operators |
| BS EN ISO 3040:2016 | Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones |
| BS EN ISO 10360-10:2016 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers for measuring point-to-point distances |
| I.S. EN ISO 16610-71:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014) |
| UNE-EN ISO 12781-2:2012 | Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
| 09/30198186 DC : 0 | BS EN ISO 13102 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL INDICATOR - DESIGN AND METROLOGICAL CHARACTERISTICS |
| CSA Z10535.1 : 2015 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 10360-7:2011 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems |
| UNI CEN ISO/TS 14253-3 : 2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| PREN ISO 12780-2 : DRAFT 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| UNI EN ISO 12780-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| DIN 863-1:2016-07 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MICROMETERS - PART 1: MICROMETERS FOR EXTERNAL MEASUREMENTS; MAXIMUM PERMISSIBLE ERRORS |
| DD CEN ISO/TS 12780-2:2007 | Geometrical product specifications (GPS). Straightness Specification operators |
| 17/30341082 DC : 0 | BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| BS EN ISO 25178-3:2012 | Geometrical product specifications (GPS). Surface texture: Areal Specification operators |
| PD CEN ISO/TS 15530-1:2013 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics |
| DD ENV ISO 14253-2:2001 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipments Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| 11/30229116 DC : 0 | BS ISO 1328-1 - CYLINDRICAL GEARS - ISO SYSTEM OF TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO CORRESPONDING FLANKS OF GEAR TEETH |
| DIN EN ISO 12180-1:2011-07 | Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) |
| BS EN ISO 9493:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics |
| BS EN ISO 14253-3:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
| DIN EN ISO 12780-1:2014-04 | Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
| 16/30339565 DC : 0 | BS ISO 12297-2 - ROLLING BEARINGS - CYLINDRICAL ROLLERS - PART 2: CERAMIC ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| I.S. EN ISO 1938-2:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| 02/707905 DC : DRAFT JUN 2002 | ISO/DIS 18653 - GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF GEARS |
| BS EN ISO 3611:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics |
| I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
| UNE-EN ISO 3040:2016 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016) |
| 09/30198149 DC : DRAFT MAY 2009 | BS EN ISO 12180-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
| BS EN ISO 17450-3:2016 | Geometrical product specifications (GPS). General concepts Toleranced features |
| UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| I.S. EN ISO 15530-3:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
| DD CEN ISO/TS 14253-3:2007 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
| 08/30169333 DC : DRAFT MAR 2008 | BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. CEN/TR 15235:2005 | WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES |
| ISO/TR 16015:2003 | Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
| I.S. EN ISO 17450-4:2018 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017) |
| ISO 5-4:2009 | Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density |
| ISO 230-1:2012 | Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
| I.S. EN ISO 14405-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| ISO 10360-12:2016 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 12: Articulated arm coordinate measurement machines (CMM) |
| UNI EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| UNI EN ISO 25178-3 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS |
| ISO 5393:2017 | Rotary tools for threaded fasteners — Performance test method |
| I.S. EN ISO 3040:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES (ISO 3040:2016) |
| I.S. EN ISO 17450-3:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016) |
| UNE-EN ISO 2538-2:2015 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
| UNE-EN ISO 12181-1:2012 | Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/FDIS 12181-1:2010) |
| UNI EN ISO 12180-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM |
| UNI EN ISO 10360-7 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
| UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
| I.S. EN ISO 10360-9:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
| I.S. EN ISO 25178-1:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE (ISO 25178-1:2016) |
| UNE-EN ISO 14405-2:2015 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| ISO 14978:2006 | Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment |
| NF EN ISO 10360-5 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| DIN EN ISO 11137-3:2015-08 (Draft) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
| ISO/TS 14253-4:2010 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 4: Background on functional limits and specification limits in decision rules |
| BS EN ISO 1302:2002 | Geometrical product specifications (GPS). Indication of surface texture in technical product documentation |
| BS EN 12464-1:2011 | Light and lighting. Lighting of work places Indoor work places |
| UNE-EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| DIN EN ISO 463 : 2009-07 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| BS EN ISO 2692:2014 | Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 25178-72:2017 | Geometrical product specifications (GPS) Surface texture: Areal Part 72: XML file format x3p |
| I.S. EN ISO 11608-1:2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| I.S. EN ISO 10535:2006 | HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 10360-4:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 4: CMMS USED IN SCANNING MEASURING MODE |
| EN ISO 12780-2:2011 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| CEN ISO/TS 12181-2:2007 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003) |
| CEN ISO/TS 12180-2:2007 | Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO/TS 12180-2:2003) |
| EN ISO 12181-1:2011 | Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) |
| CEN ISO/TS 12781-2:2007 | Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO/TS 12781-2:2003) |
| DIN EN ISO 139:2011-10 | Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005 + Amd.1:2011) |
| EN ISO 14253-3:2011 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
| EN ISO 13102:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
| EN ISO 12780-1:2011 | Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
| DIN EN ISO 21649:2010-01 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| DIN 863-1:1999-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MICROMETERS - PART 1: MICROMETERS FOR EXTERNAL MEASUREMENTS; MAXIMUM PERMISSIBLE ERRORS |
| DIN EN ISO 1101:2017-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| CEN ISO/TS 14253-4:2010 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 4: Background on functional limits and specification limits in decision rules (ISO/TS 14253-4:2010) |
| I.S. EN ISO 1302:2002 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION |
| EN 1071-1:2003 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer |
| CEN ISO/TS 12780-2:2007 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003) |
| MIL-PRF-50884 Revision F:2014 | Printed Wiring Board, Flexible or Rigid-Flex, General Specification for |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| NF EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| VDI/VDE 2617 Blatt 6.1:2007-05 | Accuracy of coordinate measuring machines - Characteristics and their testing - Coordinate measuring machines with optical probing - Code of practice for the application of DIN EN ISO 10360 to coordinate measuring machines with optical sensors for lateral structures |
| ONORM EN ISO 3611 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| NBR ISO 18669-2 : 2010 ERRATA 1 2012 | INTERNAL COMBUSTION ENGINES - PISTON PINS - PART 2: INSPECTION MEASURING PRINCIPLES |
| VDI/VDE 2617 Blatt 4:2006-05 | Accuracy of coordinate measuring machines - Characteristics and their checking - Manual for the use of DIN EN ISO 10360-3 for coordinate measuring machines with additional axes of rotation |
| ONORM EN ISO 11608-1 : 2015 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS (ISO 11608-1:2014) |
| AGMA ISO 18653 : A | GEARS - EVALUATION OF INSTRUMENTS FOR THE MEASUREMENT OF INDIVIDUAL GEARS |
| 08/30181977 DC : DRAFT MAY 2008 | BS EN ISO 9493 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL REQUIREMENTS |
| ISO/PAS 12868:2009 | Geometrical product specification (GPS) Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems |
| PD ISO/TS 17863:2013 | Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies |
| UNE-EN ISO 11608-5:2013 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| UNE-EN ISO 10360-7:2012 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
| BS EN ISO 13225:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics |
| UNE-EN ISO 13385-2:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| I.S. EN ISO 10360-8:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013) |
| DIN EN ISO 2538-2:2015-01 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
| ISO/TR 10064-5:2005 | Code of inspection practice Part 5: Recommendations relative to evaluation of gear measuring instruments |
| DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| 15/30295114 DC : 0 | BS EN ISO 25178-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS |
| UNI EN ISO 12181-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| 12/30259670 DC : 0 | BS ISO/IEC GUIDE 98-4.2 - UNCERTAINTY OF MEASUREMENT - PART 4: ROLE OF MEASUREMENT UNCERTAINTY IN CONFORMITY ASSESSMENT |
| 14/30272936 DC : 0 | BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES |
| 15/30282559 DC : 0 | BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
| ISO/TR 10064-1:2017 | Code of inspection practice Part 1: Measurement of cylindrical gear tooth flanks |
| DIN EN ISO 11608-5:2013-01 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| 07/19984917 DC : 0 | BS ISO 14659 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| BS EN ISO 25178-72:2017 | Geometrical product specifications (GPS). Surface texture: Areal XML file format x3p |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| BS EN ISO 13385-2:2011 | Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics |
| 96/704404 DC : 0 | ISO/DIS 9121 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - INTERNAL MICROMETERS WITH TWO-POINT CONTACT - DESIGN AND METROLOGICAL REQUIREMENTS |
| BS ISO 8062-4:2017 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system |
| PD CEN ISO/TS 8062-2:2013 | Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
| BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
| MIL-PRF-31032 Revision C:2016 | Printed Circuit Board/Printed Wiring Board, General Specification for |
| BS EN ISO 12180-1:2011 | Geometrical product specifications (GPS). Cylindricity Vocabulary and parameters of cylindrical form |
| BS ISO 199:2014 | Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values |
| DIN EN ISO 10360-9:2014-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
| I.S. EN ISO 13102:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| BS ISO 5-2:2009 | Photography and graphic technology. Density measurements Geometric conditions for transmittance density |
| DIN EN ISO 13385-1:2011-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
| UNI EN ISO 2538-1 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES |
| 16/30314605 DC : DRAFT MAR 2016 | BS EN ISO 5459 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| NF EN ISO 12780-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| DIN EN ISO 10360-7:2011-09 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
| DIN 874-2:2003-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHT EDGES - PART 2: KNIFE EDGE STRAIGHT EDGES - DIMENSIONS, TECHNICAL DELIVERY CONDITIONS |
| 12/30234144 DC : 0 | BS EN ISO 10360-10 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES |
| BS EN ISO 12781-1:2011 | Geometrical product specifications (GPS). Flatness Vocabulary and parameters of flatness |
| PD ISO/TS 17865:2016 | Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems |
| BS EN ISO 2538-1:2014 | Geometrical product specifications (GPS). Wedges Series of angles and slopes |
| DD CEN ISO/TS 12181-2 : DRAFT 2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| 08/30154185 DC : DRAFT MAY 2008 | |
| BS ISO 10959:2016 | Aerospace. MJ threads. Gauging |
| 17/30341085 DC : 0 | BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS |
| I.S. EN ISO 25178-72:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 72: XML FILE FORMAT X3P (ISO 25178-72:2017) |
| EN ISO 2692:2014 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| DD CEN ISO/TS 12781-2:2007 | Geometrical product specifications (GPS). Flatness Specification operators |
| NF EN ISO 12181-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| DIN EN ISO 12781-1:2011-07 | Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
| S.R. CEN ISO TS 12181-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| UNE-ISO 230-10:2016 | Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools. |
| ISO 14253-2:2011 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| ISO 25178-71:2017 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards |
| UNE-EN ISO 286-1:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
| UNE-EN ISO 2538-1:2015 | Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
| UNE-EN ISO 12180-2:2012 | Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
| UNE-EN ISO 12181-2:2012 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| I.S. EN ISO 12181-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| BS ISO 230-10:2016 | Test code for machine tools Determination of the measuring performance of probing systems of numerically controlled machine tools |
| I.S. EN ISO 13225:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012) |
| BS EN ISO 14405-2:2011 | Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
| S.R. CEN ISO/TS 8062-2:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| NF EN ISO 3611 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 13385-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 25178-70:2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| ISO 15530-3:2011 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards |
| UNI EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| DIN EN ISO 14405-2:2012-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| I.S. EN ISO 10360-12:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) (ISO 10360-12:2016) |
| I.S. EN ISO 10360-7:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
| UNE-EN ISO 12180-1:2012 | Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) |
| NF EN ISO 14253-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| NF EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPER - DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNI EN ISO 13102 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS |
| NF EN ISO 12180-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
| UNI EN ISO 14978 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
| DIN EN ISO 10360-6:2009-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
| BS EN ISO 10535:2006 | Hoists for the transfer of disabled persons. Requirements and test methods |
| UNE-EN ISO 2692:2015 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| ISO 25178-70:2014 | Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
| ISO 13225:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics |
| EN ISO 10360-5:2010 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010) |
| UNE-ISO 26303:2013 | Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
| BS EN ISO 5436-2:2012 | Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards |
| BS EN ISO 10360-2:2009 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used for measuring linear dimensions |
| ONORM EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
| I.S. EN ISO 10360-2:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
| I.S. EN ISO 1119:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPER ANGLES (ISO 1119:2011) |
| I.S. EN 12464-1:2011 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES |
| I.S. EN ISO 21649:2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 1101:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| I.S. EN ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017) |
| I.S. EN ISO 2692:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014) |
| I.S. EN ISO 5436-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
| I.S. EN ISO 1660:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017) |
| DIN EN 1970:2005-10 | ADJUSTABLE BEDS FOR DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| ASME B89.7.3.3 : 2002 : R2007 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| VDI/VDE 2617 Blatt 10:2011-01 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests of lasertrackers |
| ASME B89.4.10360.2 : 2008 | ACCEPTANCE TEST AND REVERIFICATION TEST FOR COORDINATE MEASURING MACHINES (CMMS) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
| VDI/VDE/DGQ/DKD 2622 Blatt 15.1:2011-10 | Calibration for measuring equipment for electrical quantities - Artificial mains networks |
| VDI/VDE 2617 Blatt 7:2008-09 | Accuracy of coordinate measuring machines - Parameters and their checking - Estimation of measurement uncertainty of coordinate measuring machines by means of simulation |
| VDI/VDE 2617 Blatt 5:2010-12 | Accuracy of coordinate measuring machines - Parameters and their reverification - Interim check with artefacts |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE/DGQ/DKD 2622 Blatt 19:2015-06 | Calibration of measuring equipment for electrical quantities - Characterisation of HF-measuring cables |
| VDI/VDE/DGQ/DKD 2622 Blatt 15.4:2010-05 | Calibration of measuring equipment for electrical quantities - Passive measuring equipment for use in EMC-applications - Current clamps |
| VDI/VDE 2617 Blatt 2.1:2014-03 | Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement |
| VDI/VDE 2617 Blatt 12.1:2011-03 | Accuracy of coordinate measuring machines - Characteristics and their checking - Acceptance and reverification tests for tactile CMM measuring microgeometries |
| VDI/VDE 2634 Blatt 2:2012-08 | Optical 3-D measuring systems - Optical systems based on area scanning |
| VDI/VDE 2629 Blatt 2:2012-06 | Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces |
| VDI/VDE 2617 Blatt 8:2006-07 | Accuracy of coordinate measuring machines - Characteristics and their testing - Test suitability of measurements with coordinate measuring machines |
| ASME B89.7.3.3:2002 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| VDI/VDE 2617 Blatt 13; VDI/VDE 2630 Blatt 1.3:2011-12 | VDI/VDE 2617 Blatt 13: Accuracy of coordinate measuring machines - Characteristics and their testing - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors - VDI/VDE 2630 Blatt 1.3: Computed tomography in dimensional measurement - Guideline for the application of DIN EN ISO 10360 for coordinate measuring machines with CT-sensors |
| VDI/VDE 2617 Blatt 11:2011-03 | Accuracy of coordinate measuring machines - Characteristics and their checking - Determination of the uncertainty of measurement for coordinate measuring machines using uncertainty budgets |
| VDI/VDE 2617 Blatt 2.2:2000-07 | Accuracy of coordinate measuring machines - Parameters and their reverification - Form measurement |
| VDI/VDE/DGQ/DKD 2622 Blatt 21:2004-05 | Calibration of measurement equipments for electrical quantities - Recorders |
| VDI/VDE 2630 Blatt 1.2:2010-11 | Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements |
| VDI/VDE 2630 Blatt 2.1:2015-06 | Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors |
| VDI 3431:2016-08 | Bending of profiles - Testing notes for profile bending elements |
| VDI/VDE/DGQ/DKD 2622 Blatt 7:2004-05 | Calibration of measuring equipment for electrical quantities - Universal counter |
| ASME B89.7.3.3 : 2002 : R2012 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| ASME B89.7.3.3 : 2002 : R2017 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| VDI/VDE 2629 Blatt 1:2008-08 | Accuracy of contour-measuring systems - Characteristics and checking of characteristics - Acceptance testing and reverification testing of contour-measuring systems according to the tactile stylus method |
| VDI/VDE/DGQ/DKD 2622 Blatt 1:2014-06 | Calibration of measuring equipment for electrical quantities - Fundamentals |
| VDI/VDE 2624 Blatt 2.1:2008-12 | Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems |
| I.S. EN ISO 12180-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 1: VOCABULARY AND PARAMETERS OF CYLINDRICAL FORM |
| ISO/IEC Guide 98-4:2012 | Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment |
| 17/30348149 DC : 0 | BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| DIN EN ISO 13225:2012-08 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| UNI EN ISO 17450-1 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
| UNI EN ISO 25178-604 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS |
| ONORM EN ISO 14978 : 2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| 17/30348146 DC : 0 | BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| BS ISO 464:2015 | Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values |
| BS EN ISO 18391:2016 | Geometrical product specifications (GPS). Population specification |
| DD ISO/TS 15530-4:2008 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation |
| BS EN ISO 1938-2:2017 | Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
| BS EN ISO 12181-1:2011 | Geometrical product specifications (GPS). Roundness Vocabulary and parameters of roundness |
| BS EN ISO 10360-8:2013 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors |
| BS ISO 1328-1:2013 | Cylindrical gears. ISO system of flank tolerance classification Definitions and allowable values of deviations relevant to flanks of gear teeth |
| 09/30118717 DC : DRAFT OCT 2009 | BS ISO 230-1 - TEST CODE FOR MACHINE TOOLS - PART 1: GEOMETRIC ACCURACY OF MACHINES OPERATING UNDER NO-LOAD OR QUASI-STATIC CONDITIONS |
| BS EN ISO 15530-3:2011 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards |
| 13/30280243 DC : 0 | BS ISO 5393 - ROTARY TOOLS FOR THREADED FASTENERS - PERFORMANCE TEST METHOD |
| I.S. EN ISO 3611:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNE-ISO 230-1:2014 | Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
| DIN EN ISO 12781-2:2011-07 | Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
| UNE-EN ISO 25178-3:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) |
| I.S. EN ISO 139:2005 | TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| BS EN ISO 25178-606:2015 | Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments |
| DIN EN ISO 12180-2:2011-07 | Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
| BS EN ISO 25178-603:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| UNI EN ISO 2538-2 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING |
| BS EN ISO 14405-3:2017 | Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes |
| BS EN ISO 16610-71:2014 | Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters |
| 16/30338746 DC : DRAFT APR 2016 | BS ISO 15872 - AEROSPACE - UNJ THREADS - GAUGING |
| BIS IS 16226-2 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| AGMA 935 : A | RECOMMENDATIONS RELATIVE TO THE EVALUATION OF RADIAL COMPOSITE GEAR DOUBLE FLANK TESTERS |
| DIN EN ISO 10360-10:2017-03 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| UNI EN ISO 12780-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS |
| UNI EN ISO 15530-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS |
| DIN EN ISO 25178-70:2014-06 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| BS EN ISO 14253-5:2015 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing of indicating measuring instruments |
| DD CEN ISO/TS 12180-2:2007 | Geometrical product specifications (GPS). Cylindricity Specification operators |
| BS ISO 13041-6:2009 | Test conditions for numerically controlled turning machines and turning centres Accuracy of a finished test piece |
| UNE-EN ISO 17450-3:2017 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| BS ISO 26303:2012 | Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
| BS EN ISO 11608-5:2012 | Needle-based injection systems for medical use. Requirements and test methods Automated functions |
| I.S. EN ISO 16610-21:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
| UNE-ISO 13041-6:2011 | Test conditions for numerically controlled turning machines and turning centres -- Part 6: Accuracy of a finished test piece |
| DIN EN ISO 2538-1:2015-01 | GEOMETRICAL PRODUCT SPECFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES; (ISO 2538-1:2014) |
| ISO 12297-2:2018 | Rolling bearings — Cylindrical rollers — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers |
| 10/30208977 DC : 0 | BS EN ISO 11608-1 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS |
| 09/30198155 DC : DRAFT MAY 2009 | BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS |
| BS EN ISO 13102:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics |
| BS EN ISO 10360-9:2013 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems |
| 14/30291326 DC : 0 | BS EN ISO 10360-12 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) |
| UNE-EN ISO 17450-1:2015 | Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
| UNI EN ISO 16610-71 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS |
| ISO/TS 15530-4:2008 | Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
| UNI EN ISO 3611 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNI EN ISO 286-1 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS |
| 12/30264410 DC : 0 | BS ISO 199 - ROLLING BEARINGS - THRUST BEARINGS - TOLERANCES |
| BS EN ISO 25178-70:2014 | Geometrical product specification (GPS). Surface texture: Areal Material measures |
| PD ISO/TR 10064-1:2017 | Code of inspection practice Measurement of cylindrical gear tooth flanks |
| UNE-EN ISO 10360-10:2017 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| DIN EN ISO 25178-603:2014-02 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| I.S. EN ISO 5459:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| UNI EN ISO 11608-5 : 2013 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
| ISO/TR 14253-6:2012 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
| CAN/CSA-ISO 11137-3:17 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06) |
| I.S. EN ISO 16610-85:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
| NF EN ISO 10360-7 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
| I.S. EN ISO 12780-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 1: VOCABULARY AND PARAMETERS OF STRAIGHTNESS |
| UNI EN ISO 25178-70 : 2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| I.S. EN ISO 12781-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
| I.S. EN ISO 14978:2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| UNE-EN ISO 9493:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
| ISO 199:2014 | Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| UNI EN ISO 13225 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ISO 14405-2:2011 | Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
| UNI EN ISO 5459 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| I.S. EN ISO 12781-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS |
| ISO/TS 17863:2013 | Geometrical product specification (GPS) Tolerancing of moveable assemblies |
| ISO 5458:1998 | Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| ISO 5-2:2009 | Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density |
| S.R. CEN ISO TS 12180-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
| S.R. CEN ISO TS 14253-3:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| DIN EN ISO 10360-2:2010-06 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
| DIN EN ISO 10360-5:2011-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| DIN EN ISO 4288:1998-04 | GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| DIN EN ISO 14978:2006-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| DIN EN ISO 11608-1:2015-04 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| BS EN ISO 21649:2009 | Needle-free injectors for medical use. Requirements and test methods |
| ISO 464:2015 | Rolling bearings Radial bearings with locating snap ring Dimensions, geometrical product specifications (GPS) and tolerance values |
| ISO 463:2006 | Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges |
| ISO/TS 12781-2:2003 | Geometrical Product Specifications (GPS) Flatness Part 2: Specification operators |
| BS EN ISO 10360-3:2001 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs with the axis of the rotary table as the fourth axis |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| BS EN ISO 139 : 2005 | TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| ISO 21649:2006 | Needle-free injectors for medical use — Requirements and test methods |
| ISO 10360-6:2001 | Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features |
| ISO/TS 15530-1:2013 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics |
| I.S. EN ISO 13385-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| EN ISO 13385-2:2011 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| UNE-EN ISO 10360-5:2012 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010) |
| ONORM EN ISO 13385-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
| ONORM EN ISO 10360-5 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| UNI EN ISO 10360-5 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| EN ISO 25178-72:2017 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017) |
| EN ISO 14405-3:2017 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) |
| UNI EN ISO 463 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| UNI EN ISO 1119 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SERIES OF CONICAL TAPERS AND TAPERS ANGLES |
| UNI EN ISO 139 : 2011 | TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| UNI EN ISO 10360-6 : 2005 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
| UNI EN ISO 5436-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS |
| ONORM EN ISO 12179 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| I.S. EN ISO 10360-1:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 1: VOCABULARY |
| UNI EN ISO 10360-2 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
| UNE-EN ISO 12780-2:2012 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| AGMA ISO 10064-5 : A | CODE OF INSPECTION PRACTICE - PART 5: RECOMMENDATIONS RELATIVE TO EVALUATION OF GEAR MEASURING INSTRUMENTS |
| UNI ISO 13041-6 : 2010 | Test conditions for numerically controlled turning machines and turning centres - Part 6: Accuracy of a finished test piece |
| DIN SPEC 91184 E : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| 09/30198167 DC : DRAFT MAY 2009 | BS EN ISO 12781-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
| 08/30180227 DC : DRAFT MAR 2008 | BS EN ISO 3611 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| 10/30213495 DC : 0 | BS ISO 10360-9 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS |
| 16/30341970 DC : 0 | BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| BS EN ISO 12181-2:2011 | Geometrical product specifications (GPS). Roundness Specification operators |
| DIN EN ISO 13102:2012-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| BS EN ISO 286-1:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
| UNI CEN ISO/TS 15530-1 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS |
| UNI EN ISO 21649 : 2009 | NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS |
| UNI ISO/TS 15530-4 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION |
| UNI EN ISO 16610-21 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS |
| UNI EN ISO 10360-9 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS |
| UNI EN ISO 12180-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
| DIN EN ISO 12780-2:2011-07 | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011) |
| UNI CEN ISO/TS 8062-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
| 14/30257552 DC : 0 | BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES |
| NF EN ISO 9493 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS EN ISO 16610-41:2015 | Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters |
| BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
| UNE-EN ISO 16610-21:2013 | Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
| I.S. EN ISO 9493:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| FD ISO/TR 14253-6 : 2013 FD | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 6: GENERALIZED DECISION RULES FOR THE ACCEPTANCE AND REJECTION OF INSTRUMENTS AND WORKPIECES |
| UNE-EN ISO 12781-1:2012 | Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
| DIN ISO 18653:2009-12 | Gears - Evaluation of instruments for the measurement of individual gears (ISO 18653:2003) |
| I.S. EN ISO 286-1:2010/AC:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010) |
| UNE-EN ISO 25178-1:2016 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016) |
| BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
| 00/715013 DC : DRAFT OCT 2000 | PREN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF RAIL GRINDING, MILLING AND PLANING WORK IN TRACK |
| DIN EN ISO 16610-41:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015) |
| DD CEN ISO/TS 14253-4:2010 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Background on functional limits and specification limits in decision rules |
| DD ISO/PAS 12868:2009 | Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems |
| BS EN ISO 16610-85:2013 | Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation |
| I.S. EN ISO 16610-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| BS ISO 230-1:2012 | Test code for machine tools Geometric accuracy of machines operating under no-load or quasi-static conditions |
| 09/30198170 DC : DRAFT MAY 2009 | BS EN ISO 14253-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORK PIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| BS ISO 492:2014 | Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values |
| BS ISO 15872:2017 | Aerospace. UNJ threads. Gauging |
| 09/30198161 DC : 0 | BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| 07/30145258 DC : 0 | BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| UNI CEN/TR 15235 : 2012 | WELDING - METHODS FOR ASSESSING IMPERFECTIONS IN METALLIC STRUCTURES |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| 08/30184522 DC : DRAFT JUNE 2008 | BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| UNE-EN ISO 12780-1:2012 | Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO 12780-1:2011) |
| I.S. EN ISO 2538-2:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 2: DIMENSIONING AND TOLERANCING (ISO 2538-2:2014) |
| NF EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| DIN EN ISO 14253-3:2011-10 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| DIN EN ISO 12181-1:2011-07 | Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) |
| DIN EN ISO 16610-71:2014-12 | Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
| 17/30346164 DC : 0 | BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| I.S. EN ISO 11608-5:2012 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS (ISO 11608-5:2012) |
| UNI EN ISO 12781-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 1: VOCABULARY AND PARAMETERS OF FLATNESS |
| UNE-EN ISO 13225:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| S.R. CEN ISO TS 14253-4:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES |
| I.S. EN ISO 14253-3:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| EN ISO 15530-3:2011 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) |
| ANSI/AAMI/ISO 11137-3:2017 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL |
| I.S. EN ISO 16610-31:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| ISO 8062-4:2017 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system |
| ISO/TR 230-11:2018 | Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests |
| S.R. CEN ISO/TS 15530-1:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS (ISO/TS 15530-1:2013) |
| DIN EN ISO 15530-3:2012-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
| I.S. EN ISO 25178-604:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| I.S. EN ISO 17450-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO 17450-1:2011) |
| I.S. EN ISO 2538-1:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - WEDGES - PART 1: SERIES OF ANGLES AND SLOPES (ISO 2538-1:2014) |
| ISO 3245:2015 | Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
| I.S. EN ISO 25178-71:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS (ISO 25178-1:2017) |
| BS ISO 5393:2017 | Rotary tools for threaded fasteners. Performance test method |
| DIN EN ISO 14253-2:2011-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011) |
| I.S. EN ISO 25178-603:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| UNI EN ISO 14253-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| UNE-EN ISO 3611:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| I.S. EN ISO 16610-41:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015) |
| EN ISO 25178-71:2017 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) |
| ISO 230-10:2016 | Test code for machine tools Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools |
| ISO 10959:2016 | Aerospace MJ threads Gauging |
| I.S. EN ISO 12780-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| I.S. EN ISO 14253-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| I.S. EN ISO 12180-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
| DIN EN ISO 2692:2015-12 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| ISO/TS 12181-2:2003 | Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| ISO 17450-3:2016 | Geometrical product specifications (GPS) General concepts Part 3: Toleranced features |
| ISO 16610-1:2015 | Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts |
| ISO 25178-603:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| BS EN ISO 1101:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out |
| ISO 16610-21:2011 | Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters |
| ISO 5436-2:2012 | Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
| ISO 1119:2011 | Geometrical product specifications (GPS) — Series of conical tapers and taper angles |
| ISO 14253-5:2015 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments |
| ISO 1660:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing |
| ISO 10360-10:2016 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 10: Laser trackers for measuring point-to-point distances |
| ISO 10360-9:2013 | Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems |
| ISO 18391:2016 | Geometrical product specifications (GPS) Population specification |
| ISO 9493:2010 | Geometrical product specifications (GPS) Dimensional measuring equipment: Dial test indicators (lever type) Design and metrological characteristics |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 12781-2:2011 | Geometrical product specifications (GPS) Flatness Part 2: Specification operators |
| UNE-EN 12464-1:2012 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| ISO 18653:2003 | Gears Evaluation of instruments for the measurement of individual gears |
| ISO 25178-3:2012 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| ISO 10360-5:2010 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and multiple stylus contacting probing systems |
| ISO 2538-1:2014 | Geometrical product specifications (GPS) — Wedges — Part 1: Series of angles and slopes |
| BS EN ISO 10360-6:2001 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features |
| ISO 14253-3:2011 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
| ISO 3040:2016 | Geometrical product specifications (GPS) Dimensioning and tolerancing Cones |
| ISO 10360-4:2000 | Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 4: CMMs used in scanning measuring mode |
| ISO 10535:2006 | Hoists for the transfer of disabled persons Requirements and test methods |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| BS EN ISO 463:2006 | Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges |
| ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| ISO 25178-604:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| ISO 25178-1:2016 | Geometrical product specifications (GPS) Surface texture: Areal Part 1: Indication of surface texture |
| ISO 13385-1:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics |
| ISO/TS 14253-2:1999 | Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| ISO 12180-1:2011 | Geometrical product specifications (GPS) Cylindricity Part 1: Vocabulary and parameters of cylindrical form |
| ISO 13102:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics |
| ISO/TS 12780-2:2003 | Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 12181-1:2011 | Geometrical product specifications (GPS) Roundness Part 1: Vocabulary and parameters of roundness |
| ISO 17450-1:2011 | Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification |
| BS EN ISO 10360-5:2010 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs using single and multiple stylus contacting probing systems |
| UNE-EN ISO 13385-1:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
| ISO 14405-3:2016 | Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes |
| ISO 10360-1:2000 | Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 1: Vocabulary |
| ISO/TS 12180-2:2003 | Geometrical Product Specifications (GPS) Cylindricity Part 2: Specification operators |
| ISO 10360-3:2000 | Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 3: CMMs with the axis of a rotary table as the fourth axis |
| ISO 11608-1:2014 | Needle-based injection systems for medical use Requirements and test methods Part 1: Needle-based injection systems |
| ISO 13385-2:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics |
| ISO 16610-85:2013 | Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation |
| ISO 2538-2:2014 | Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing |
| BS EN ISO 3650:1999 | Geometrical product specifications (GPS). Length standards. Gauge blocks |
| BS EN 1970:2000 | Adjustable beds for disabled persons. Requirements and test methods |
| UNE-EN ISO 10360-2:2010 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
| I.S. EN ISO 10360-5:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| BS EN ISO 1660:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing |
| ISO 16610-41:2015 | Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters |
| ISO 16610-31:2016 | Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters |
| ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
| ISO 16610-71:2014 | Geometrical product specifications (GPS) — Filtration — Part 71: Robust areal filters: Gaussian regression filters |
| ISO 12780-1:2011 | Geometrical product specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness |
| BS EN ISO 10360-1:2001 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Vocabulary |
| ISO 25178-606:2015 | Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments |
| ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
| ISO 10360-7:2011 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 7: CMMs equipped with imaging probing systems |
| DIN EN 12464-1:2011-08 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| EN ISO 16610-1:2015 | Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015) |
| EN ISO 25178-606:2015 | Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) |
| EN ISO 5436-2:2012 | Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) |
| EN ISO 10360-7:2011 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
| I.S. EN ISO 12179:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| EN ISO 1660:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) |
| EN ISO 21649:2009 | Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) |
| EN ISO 25178-1:2016 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016) |
| EN ISO 5459:2011 | Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) |
| EN ISO 16610-85:2013 | Geometrical product specifications (GPS) - Filtration- Part 85: Morphological areal filters: Segmentation (ISO 16610-85:2013) |
| EN ISO 14253-5:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) |
| EN ISO 10360-2:2009 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN ISO 11608-5:2012 | Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) |
| EN ISO 25178-3:2012 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) |
| EN ISO 13385-1:2011 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
| EN ISO 9493:2010 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
| EN ISO 3650:1998 | Geometrical product specifications (GPS) - Length standards - Gauge blocks (ISO 3650:1998) |
| EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| EN ISO 16610-21:2012 | Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
| EN ISO 11137-3:2017 | Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017) |
| EN ISO 25178-70:2014 | Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) |
| EN ISO 10360-3:2000 | Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 3: CMMs with the axis of a rotary table as the forth axis (ISO 10360-3:2000) |
| EN ISO 3040:2016 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016) |
| EN ISO 3611:2010 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| EN ISO 16610-41:2015 | Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015) |
| EN ISO 1119:2011 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
| EN ISO 17450-3:2016 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| EN ISO 2538-1:2014 | Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) |
| EN ISO 13225:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| EN ISO 11608-1:2015 | Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014) |
| EN ISO 17450-2:2012 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| EN ISO 10360-9:2013 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 9: CMMs with multiple probing systems (ISO 10360-9:2013) |
| EN ISO 25178-603:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) |
| EN ISO 1938-1:2015 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| EN ISO 2538-2:2014 | Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) |
| EN ISO 10360-8:2013 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013) |
| EN ISO 16610-31:2016 | Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016) |
| EN ISO 1938-2:2017 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
| EN ISO 18391:2016 | Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) |
| EN ISO 25178-604:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) |
| I.S. EN ISO 4288:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
| EN ISO 16610-71:2014 | Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
| DIN EN ISO 14405-3:2013-08 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016) |
| UNE-EN ISO 13102:2013 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
| PREN 12464-1 : DRAFT 2009 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES |
| UNI EN ISO 12181-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS |
| DIN EN ISO 25178-604:2013-12 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| BS EN ISO 25178-1:2016 | Geometrical product specifications (GPS). Surface texture: Areal Indication of surface texture |
| BS EN ISO 17450-1:2011 | Geometrical product specifications (GPS). General concepts Model for geometrical specification and verification |
| DIN EN ISO 1938-2:2017-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| BS EN ISO 12180-2:2011 | Geometrical product specifications (GPS). Cylindricity Specification operators |
| DIN EN ISO 12181-2:2011-07 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| NF EN ISO 12781-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
| EN ISO 17450-4:2018 | Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017) |
| 11/30231340 DC : 0 | BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
| ISO 13041-6:2009 | Test conditions for numerically controlled turning machines and turning centres Part 6: Accuracy of a finished test piece |
| 13/30272933 DC : 0 | BS EN ISO 14405-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES |
| ENV ISO 14253-2:2001 | Geometrical Product Specifications (GPS) - Inspection by measurement of workpieces and measuring equipments - Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999) |
| BS EN ISO 16610-1:2015 | Geometrical product specifications (GPS). Filtration Overview and basic concepts |
| 08/30192849 DC : 0 | BS ISO 5-2 - PHOTOGRAPHY AND GRAPHIC TECHNOLOGY - SPECTRAL DENSITY MEASUREMENTS - PART 2: GEOMETRIC CONDITIONS FOR TRANSMISSION DENSITY |
| BS EN ISO 16610-31:2016 | Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters |
| BS EN ISO 1938-1:2015 | Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
| DIN EN ISO 16610-31:2015-09 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| DIN EN ISO 17450-2:2013-04 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| 10/30213842 DC : 0 | BS EN ISO 11608-5 - NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 5: AUTOMATED FUNCTIONS |
| DIN EN ISO 17450-1:2012-04 | Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
| 12/30258651 DC : 0 | BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES |
| BS EN ISO 16610-21:2012 | Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters |
| 14/30299349 DC : 0 | BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
| BS EN ISO 5459:2011 | Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems |
| 09/30206726 DC : DRAFT SEP 2009 | BS EN 12464-1 - LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES |
| UNI EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| DIN EN ISO 13385-2:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
| 96/704406 DC : 0 | ISO/DIS 463 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - DIAL GAUGES - DESIGN AND METROLOGICAL REQUIREMENTS |
| DIN EN ISO 10360-8:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013) |
| DIN EN ISO 16610-1:2015-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| DD ISO/TS 23165:2006 | Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
| ISO 3650:1998 | Geometrical Product Specifications (GPS) Length standards Gauge blocks |
| 13/30251870 DC : 0 | BS EN ISO 14253-5 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN TESTING INDICATING MEASURING INSTRUMENTS |
| DIN EN ISO 25178-3:2012-11 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012 |
| 04/30081057 DC : DRAFT AUG 2004 | EN ISO 10535 - HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BS ISO 3245:2015 | Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
| BS ISO 18653:2003 | Gears. Evaluation of instruments for the measurement of individual gears |
| BS ISO 5-4:2009 | Photography and graphic technology. Density measurements Geometric conditions for reflection density |
| PD ISO/TR 10064-5:2005 | Code of inspection practice Recommendations relative to evaluation of gear measuring instruments |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| BS ISO 12297-2:2018 | Rolling bearings. Cylindrical rollers Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers |
| BS EN ISO 13385-1:2011 | Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics |
| PREN ISO 11608-1 : DRAFT 2010 | NEEDLE-BASED INJECTION SYSTEMS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS - PART 1: NEEDLE-BASED INJECTION SYSTEMS |
| UNI EN ISO 9493 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 25178-606:2015 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015) |
| I.S. CEN ISO TS 12780-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| I.S. EN ISO 1938-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
| UNE-EN ISO 14253-2:2012 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011) |
| I.S. EN ISO 10360-10:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES (ISO 10360-10:2016) |
| I.S. EN ISO 14405-3:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO/DIS 14405-3:2013) |
| UNI EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
| UNI CEN ISO/TS 14253-4 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 4: BACKGROUND ON FUNCTIONAL LIMITS AND SPECIFICATION LIMITS IN DECISION RULES |
| UNI EN ISO 13385-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 12181-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 1: VOCABULARY AND PARAMETERS OF ROUNDNESS |
| ISO 15872:2017 | Aerospace — UNJ threads — Gauging |
| BS EN ISO 25178-71:2017 | Geometrical product specifications (GPS). Surface texture: Areal Software measurement standards |
| BS EN ISO 14978:2006 | Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment |
| I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| ISO/TS 21619:2018 | Geometrical product specifications (GPS) — Types of documents with GPS |
| BIS IS 16225-2 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - CYLINDRICITY - PART 2: SPECIFICATION OPERATORS |
| UNI EN ISO 25178-603 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS |
| I.S. EN ISO 18391:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - POPULATION SPECIFICATION (ISO 18391:2016) |
| UNI EN ISO 16610-85 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION |
| I.S. EN ISO 14253-5:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN VERIFICATION TESTING OF INDICATING MEASURING INSTRUMENTS (ISO 14253-5:2015) |
| EN ISO 14405-2:2011 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| BIS IS 16224-2 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS |
| S.R. CEN ISO TS 12781-2:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FLATNESS - PART 2: SPECIFICATION OPERATORS |
| ISO 1206:2018 | Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
| EN ISO 10360-10:2016 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| UNI EN 12464-1 : 2011 | LIGHT AND LIGHTING - LIGHTING OF WORK PLACES - PART 1: INDOOR WORK PLACES |
| ISO 26303:2012 | Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
| CEN ISO/TS 8062-2 : 2013 COR 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| DIN EN ISO 1119:2012-04 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
| DIN EN ISO 10535:2007-04 | Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
| ISO 12181-2:2011 | Geometrical product specifications (GPS) Roundness Part 2: Specification operators |
| ISO/TS 14253-3:2002 | Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| BS EN 1071-1:2003 | Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by contact probe filometer |
| BS EN ISO 11137-3:2017 | Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control |
| ISO 10360-8:2013 | Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 8: CMMs with optical distance sensors |
| UNE-EN ISO 1119:2012 | Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) |
| ISO 10360-2:2009 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 2: CMMs used for measuring linear dimensions |
| ISO 11608-5:2012 | Needle-based injection systems for medical use Requirements and test methods Part 5: Automated functions |
| ISO 1938-2:2017 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
| BS EN ISO 12179:2001 | Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
| ISO/TS 8062-2:2013 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
| ISO 12180-2:2011 | Geometrical product specifications (GPS) Cylindricity Part 2: Specification operators |
| BS EN ISO 10360-4:2001 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used in scanning measuring mode |
| BS EN ISO 11608-1:2015 | Needle-based injection systems for medical use. Requirements and test methods Needle-based injection systems |
| BS EN ISO 1119:2011 | Geometrical product specifications (GPS). Series of conical tapers and taper angles |
| ISO 12780-2:2011 | Geometrical product specifications (GPS) Straightness Part 2: Specification operators |
| ISO 12781-1:2011 | Geometrical product specifications (GPS) Flatness Part 1: Vocabulary and parameters of flatness |
| DIN EN ISO 463:2006-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| EN ISO 12180-2:2011 | Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) |
| EN ISO 12180-1:2011 | Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO 12180-1:2011) |
| EN ISO 17450-1:2011 | Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
| DIN EN ISO 3611:2011-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| EN ISO 12781-1:2011 | Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO 12781-1:2011) |
| DIN EN ISO 14405-3:2017-07 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016) |
| DIN EN ISO 5436-2:2013-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
| CEN/TR 15235:2005 | Welding - Methods for assessing imperfections in metallic structures |
| CEN ISO/TS 14253-3:2007 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002) |
| EN ISO 10535:2006 | Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) |
| EN ISO 12781-2:2011 | Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO 12781-2:2011) |
| CEN ISO/TS 15530-1:2013 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013) |
| EN ISO 12181-2:2011 | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) |
| EN ISO 1302:2002 | Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002) |
| DIN EN ISO 16610-31:2017-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| ASME B89.7.3.1 : 2001 : R2006 | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| ASME B89.7.3.1 : 2001 : R2011 | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| ASME B89.7.3.1 : 2001 | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| ASME B89.7.3.1 : 2001(R2019) | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| ISO/IEC Guide 98-4:2012 | Uncertainty of measurement Part 4: Role of measurement uncertainty in conformity assessment |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 14253-2:2011 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| ISO 25378:2011 | Geometrical product specifications (GPS) Characteristics and conditions Definitions |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.