ISO 13943:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Fire safety — Vocabulary
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
09-15-2023
Language(s)
English, French
Published date
08-03-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 13943:2017 defines terminology relating to fire safety as used in ISO and IEC fire standards.
| Committee |
ISO/TC 92
|
| DevelopmentNote |
Supersedes ISO/IEC GUIDE 52 (04/2000) Supersedes ISO/DIS 13943. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| PN EN ISO 13943 : 2017 | Identical |
| SS-EN ISO 13943 : 2017 | Identical |
| CEI UNI EN ISO 13943 : 2004 | Identical |
| DS EN ISO 13943 : 2017 | Identical |
| UNI EN ISO 13943 : 2017 | Identical |
| DIN EN ISO 13943:2016-05 (Draft) | Identical |
| NS EN ISO 13943 : 2017 | Identical |
| EN ISO 13943:2017 | Identical |
| I.S. EN ISO 13943:2017 | Identical |
| BS EN ISO 13943:2017 | Identical |
| NEN EN ISO 13943 : 2017 | Identical |
| UNE-EN ISO 13943:2018 | Identical |
| DIN EN ISO 13943:2018-01 | Identical |
| NF EN ISO 13943 : 2018 | Identical |
| UNI CEI EN ISO 13943 : 2010 | Identical |
| UNE-EN ISO 13943:2012 | Identical |
| SN EN ISO 13943 : 2017 | Identical |
| ONORM EN ISO 13943 : 2017 | Identical |
| ISO 834-10:2014 | Fire resistance tests — Elements of building construction — Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
| DIN EN 13381-9:2015-09 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
| I.S. EN 45545-1:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| UNE-EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| 14/30300270 DC : 0 | BS ISO 16733-1 - FIRE SAFETY ENGINEERING - SELECTION OF DESIGN FIRE SCENARIOS AND DESIGN FIRES - PART 1: SELECTION OF DESIGN FIRE SCENARIOS |
| 04/101637 DC : DRAFT JAN 2004 | ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| 08/30186620 DC : DRAFT OCT 2008 | BS EN 13381-7 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS |
| BS ISO 23932:2009 | Fire safety engineering. General principles |
| BS EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| BS ISO 30021:2013 | Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites |
| UNE-EN 50200:2016 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| PD CEN ISO/TS 80004-6:2015 | Nanotechnologies. Vocabulary Nano-object characterization |
| 13/30255888 DC : 0 | BS ISO 5660-1 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 1: HEAT RELEASE RATE (CONE CALORIMETER METHOD) AND SMOKE PRODUCTION RATE (DYNAMIC MEASUREMENT) |
| BS EN ISO 12863 : 2010 | STANDARD TEST METHOD FOR ASSESSING THE IGNITION PROPENSITY OF CIGARETTES (ISO 12863:2010) |
| DIN EN 13381-5:2015-02 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| BS ISO 24678-6:2016 | Fire safety engineering. Requirements governing algebraic formulae Flashover related phenomena |
| DIN EN 15882-3:2009-07 | EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS |
| DIN EN 13381-8:2013-08 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
| 16/30319046 DC : 0 | BS EN ISO 4589-3 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST |
| DD IEC/TS 60695-8-3:2008 | Fire hazard testing Heat release. Heat release of insulating liquids used in electrotechnical products |
| DIN EN 15269-2:2012-12 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets |
| 12/30258984 DC : 0 | BS ISO 834-10 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 10: SPECIFIC REQUIREMENTS TO DETERMINE THE CONTRIBUTION OF APPLIED FIRE PROTECTION MATERIALS TO STRUCTURAL ELEMENTS |
| ISO/TS 16732:2005 | Fire safety engineering Guidance on fire risk assessment |
| BS ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Safety |
| PD ISO/TR 10295-3:2012 | Fire tests for building elements and components. Fire testing of service installations Single component penetration seals. Guidance on the construction and use of test configurations and simulated services to characterise sealing materials |
| I.S. EN 15269-1:2010 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 45545-4:2013 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
| UNE-EN 13381-3:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members |
| DIN EN 1364-1:2015-09 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS |
| DIN 18232-1:2002-02 | SMOKE AND HEAT CONTROL SYSTEMS - PART 1: TERMS, SAFETY OBJECTIVES |
| CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations |
| BS EN 60695-1-40:2014 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids |
| 15/30302470 DC : 0 | BS EN 13501-5 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS |
| I.S. EN 15269-7:2009 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS |
| 07/30169692 DC : 0 | BS EN 60695-2-12 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| ISO 16735:2006 | Fire safety engineering — Requirements governing algebraic equations — Smoke layers |
| BS EN 60695-7-3:2011 | Fire hazard testing Toxicity of fire effluent. Use and interpretation of test results |
| DIN EN 15269-20:2009-12 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets |
| BS ISO 12136:2011 | Reaction to fire tests. Measurement of material properties using a fire propagation apparatus |
| ISO 10294-4:2001 | Fire resistance tests Fire dampers for air distribution systems Part 4: Test of thermal release mechanism |
| ISO 16405:2015 | Room corner and open calorimeter Guidance on sampling and measurement of effluent gas production using FTIR technique |
| CEN ISO/TS 80004-6:2015 | Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| BS PD ISO/TS 80004-6 : 2013 | NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION |
| CEI EN 60695-1-30 : 2010 | FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES |
| I.S. EN 15269-5:2014 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS |
| 16/30342722 DC : 0 | BS ISO 19703 - GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES |
| UNE-EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| UNI EN 13381-5 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF - STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| 09/30206172 DC : 0 | BS EN 60695-7-3 ED.1 - FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS |
| BS EN 1364-5:2017 | Fire resistance tests for non-loadbearing elements Air transfer grilles |
| ISO 6944-1:2008 | Fire containment — Elements of building construction — Part 1: Ventilation ducts |
| BS EN 60695-1-10:2017 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines |
| ISO/TR 13387-8:1999 | FIRE SAFETY ENGINEERING - PART 8: LIFE SAFETY - OCCUPANT BEHAVIOUR, LOCATION AND CONDITION |
| BS EN 13381-8:2013 | Test methods for determining the contribution to the fire resistance of structural members Applied reactive protection to steel members |
| NF EN 60695-7-1 : 2011 | FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE |
| PD ISO/TR 15657:2013 | Fire resistance tests. Guidelines for computational structural fire design |
| BS EN 2826:2011 | Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of gas components in the smoke |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| CEI EN 60695-9-1 : 2014 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE |
| PD ISO/TR 22899-2:2013 | Determination of the resistance to jet fires of passive fire protection Guidance on classification and implementation methods |
| GOST R IEC 61034-2 : 2005 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS |
| CEI 89-38 : 2014 | FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE CHARACTERISTIC HEAT FLUX FOR IGNITION FROM A NON-CONTACTING FLAME SOURCE |
| I.S. CEN TS 13381-1:2006 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| DIN EN ISO 9239-1:2010-11 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| 14/30301908 DC : 0 | BS ISO 16730-1 - FIRE SAFETY ENGINEERING - PROCEDURES AND REQUIREMENTS FOR VERIFICATION AND VALIDATION OF CALCULATION METHODS - PART 1: GENERAL |
| 06/30151267 DC : 0 | BS ISO CD 10840 - PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS |
| 99/540249 DC : DRAFT MAR 1999 | PREN 13501-2 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS (EXCLUDING PRODUCTS FOR USE IN VENTILATION SYSTEMS) |
| 13/30267101 DC : 0 | BS EN 15269-11 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE OF OPERABLE FABRIC CURTAINS |
| 08/30166841 DC : DRAFT MAR 2008 | BS EN 13381-8 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
| BS EN 13381-9:2015 | Test methods for determining the contribution to the fire resistance of structural members Applied fire protection systems to steel beams with web openings |
| 13/30275218 DC : 0 | BS ISO 19700 - CONTROLLED EQUIVALENCE RATIO METHOD FOR THE DETERMINATION OF HAZARDOUS COMPONENTS OF FIRE EFFLUENTS - THE STEADY STATE TUBE FURNACE |
| 06/30117321 DC : DRAFT SEP 2006 | ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY |
| BS ISO 16732-1:2012 | Fire safety engineering. Fire risk assessment General |
| 10/30216696 DC : 0 | BS EN 45545-6 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
| 09/30171916 DC : DRAFT JAN 2009 | BS EN ISO 9239-1 - REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
| PREN 15254-4 : DRAFT 2016 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
| BS ISO 17554:2014 | Reaction to fire tests. Mass loss measurement |
| BS EN 13381-3:2015 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete members |
| DD CLC/TS 45545-5:2009 | Railway applications. Fire protection on railway vehicles Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| 12/30255984 DC : 0 | BS ISO 16405 - MEASUREMENT OF TOXIC GAS PRODUCTION USING FTIR TECHNIQUE FOR ROOM CORNER TEST AND OPEN CALORIMETRY |
| PD ISO/TS 29761:2015 | Fire safety engineering. Selection of design occupant behavioural scenarios |
| DD ISO/TS 14934-4:2007 | Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests |
| DD IEC/TS 60695-11-3:2004 | Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods |
| BS ISO 19701:2013 | Methods for sampling and analysis of fire effluents |
| PREN 13501-5 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS |
| BS EN 60695-2-11:2014 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT) |
| ISO 834-1:1999 | Fire-resistance tests Elements of building construction Part 1: General requirements |
| DD IEC/TS 60695-11-40:2002 | Fire hazard testing. Test flames Confirmatory tests. Guidance |
| 06/30151123 DC : DRAFT JUN 2006 | BS ISO 22899-1 - DETERMINATION OF THE RESISTANCE TO JET FIRES OF PASSIVE FIRE PROTECTION MATERIALS - GENERAL REQUIREMENTS |
| 06/30153111 DC : DRAFT JULY 2006 | |
| BS ISO 14697:2007 | Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products |
| 09/30201231 DC : 0 | BS EN 15080-13 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 13: LOADBEARING COLUMNS |
| ISO/TR 13387-7:1999 | Fire safety engineering Part 7: Detection, activation and suppression |
| IEC 60695-11-5:2016 RLV | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| 05/30127785 DC : DRAFT JAN 2005 | IEC 60695-2-12 ED.2 - FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW WIRE FLAMMABILITY TEST METHODS FOR MATERIALS |
| I.S. EN 15269-20:2009 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS |
| I.S. EN 13381-3:2015 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| PREN 1364-3 : DRAFT 2011 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY) |
| DIN EN 1364-5:2017-09 | Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles |
| UNE-EN 45545-1:2013 | Railway applications - Fire protection on railway vehicles - Part 1: General |
| PREN 1364-4 : DRAFT 2011 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION |
| UNE-EN 60695-9-1:2013 | Fire hazard testing - Part 9-1: Surface spread of flame - General guidance |
| ENV 13381-4:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members |
| GOST R IEC 61034-1 : 2005 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS |
| ASTM E 162 : 2016 : REDLINE | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| ISO/TR 13387-5:1999 | Fire safety engineering Part 5: Movement of fire effluents |
| ISO 24473:2008 | Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW |
| DIN EN ISO 1716:2010-11 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
| ISO 16737:2012 | Fire safety engineering — Requirements governing algebraic equations — Vent flows |
| BIS IS 11000-2-1 : 2008(R2015) | FIRE HAZARD TESTING - PART 2: TEST METHODS - SECTION 1: GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
| ISO 16733-1:2015 | Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios |
| PREN 1366-2 : DRAFT 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| I.S. EN 60695-11-20:2015 | FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS |
| S.R. CEN/TS 1187:2012 | TEST METHODS FOR EXTERNAL FIRE EXPOSURE TO ROOFS |
| ISO 13344:2015 | Estimation of the lethal toxic potency of fire effluents |
| BS EN 50553 : 2012 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| ISO 13785-2:2002 | Reaction-to-fire tests for façades — Part 2: Large-scale test |
| I.S. EN 61034-1:2005 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS |
| I.S. EN 13501-1:2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| I.S. EN 60332-1-2:2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME |
| BS EN 50575 : 2014 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| UNE-EN 15882-4:2013 | Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals |
| IWA 13:2014 | Multiple resource evaluation guideline |
| I.S. EN 50577:2015 | ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION) |
| PREN 15650 : DRAFT 2017 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| ISO 9705-1:2016 | Reaction to fire tests Room corner test for wall and ceiling lining products Part 1: Test method for a small room configuration |
| UNI CEI EN 45545-1 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| CEI UNI EN 45545-3 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| CEI EN 60695-1-21 : 1ED 2017 | FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS |
| UNI EN ISO 25762 : 2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| ISO 21927-1:2008 | Smoke and heat control systems — Part 1: Specification for smoke barriers |
| BS EN 60695-10-2:2014 | Fire hazard testing Abnormal heat. Ball pressure test method |
| I.S. EN 60695-11-5:2017 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| UNI EN 13501-6 : 2014 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| ISO 12992:2017 | Plastics — Vertical flame spread determination for film and sheet |
| I.S. EN 60695-2-10:2013 | FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013 (EQV)) |
| UNI EN ISO 1716 : 2010 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
| I.S. EN 60695-2-11:2014 | FIRE HAZARD TESTING - PART 2-11: GLOWING/HOTWIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT) |
| NF EN 60695-1-30 : 2017 | FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES |
| NF EN 60695-5-1 : 2003 | FIRE HAZARD TESTING - PART 5-1: CORROSION DAMAGE EFFECTS OF FIRE EFFLUENT - GENERAL GUIDANCE |
| NF ISO 19706 : 2011 | GUIDELINES FOR ASSESSING THE FIRE THREAT TO PEOPLE |
| NF ISO 16110-1 : 2009 | HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY |
| UNI EN 13381-8 : 2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
| NF EN 1366-9 : 2009 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
| I.S. EN 50200:2015 | METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
| S.R. CEN/TS 16459:2013 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| ASTM E 1546 : 2015 : REDLINE | Standard Guide for Development of Fire-Hazard-Assessment Standards |
| ISO 5660-2:2002 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
| EN 1366-11:2018 | Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components |
| ASTM E 906 : 2009 | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method |
| UNE-EN 13501-2:2009 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| UNE-EN 13501-5:2007 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| DIN EN 1364-3:2014-05 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY) |
| EN 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| BS EN 14470-2:2006 | Fire safety storage cabinets Safety cabinets for pressurised gas cylinders |
| 03/318326 DC : DRAFT NOV 2003 | |
| BS EN 1634-3:2004 | Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware Smoke control test for door and shutter assemblies |
| BS EN 1366-6:2004 | Fire resistance tests for service installations Raised access and hollow core floors |
| UNE-EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| BS EN 14390:2007 | Fire test. Large-scale room reference test for surface products |
| IEC 60332-1-1:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulatedwire or cable - Apparatus |
| UNE-CEN/TS 1187:2013 | Test methods for external fire exposure to roofs |
| BS EN 13501-3 : 2005 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS |
| BS EN ISO 5659-2:2017 | Plastics. Smoke generation Determination of optical density by a single-chamber test |
| BS EN 1365-1:2012 | Fire resistance tests for loadbearing elements Walls |
| IEC 60695-7-1:2010 | Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance |
| IEC 60695-1-40:2013 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| I.S. EN 1364-3:2014 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY) |
| I.S. EN ISO 9239-1:2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
| EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 60332-1-3:2004/A1:2015 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES (IEC 60332-1-3:2004/A1:2015) |
| EN 13501-3:2005+A1:2009 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
| EN 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
| EN 60695-7-3 : 2011 | FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011) |
| EN 13381-3:2015 | Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members |
| EN 50575:2014/A1:2016 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60695-1-10:2016 RLV | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| EN 13381-2:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes |
| CEN/TS 45545-4:2009 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for railway rolling stock design |
| EN 60695-1-11:2015 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
| UNI EN 1366-4 : 2010 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS |
| EN 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| CEN/TS 45545-7:2009 | Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 60695-11-4 : 2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
| DIN EN ISO 4589-3:2017-08 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017) |
| EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| EN 60695-1-30:2017 | Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines |
| CEN/TS 45545-6:2009 | Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems |
| EN 13381-8:2013 | Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members |
| EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
| EN 45545-3:2013 | Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 60695-1-21:2016 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| EN 12101-7:2011 | Smoke and heat control systems - Part 7: Smoke duct sections |
| EN 1366-7:2004 | Fire resistance tests for service installations - Part 7: Conveyor systems and their closures |
| EN 13381-5:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| ONORM EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| OVE/ONORM EN 60695-2-10 : 2014 | FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013) |
| ONORM EN 15269-3 : 2012 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE TIMBER FRAMED WINDOWS |
| OVE/ONORM EN 60695-7-2 : 2013 | FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011) |
| 10/30183696 DC : 0 | BS ISO 12136 - REACTION TO FIRE TESTS - MEASUREMENT OF FUNDAMENTAL MATERIAL PROPERTIES USING A FIRE PROPAGATION APPARATUS |
| UNE-ISO 16730-1:2017 | Fire safety engineering . Procedures and requirements for verification and validation of calculation methods . Part 1: General |
| DD ENV 1363-3:2000 | Fire resistance tests Verification of furnace performance |
| 17/30335581 DC : 0 | BS ISO 24678-7 - FIRE SAFETY ENGINEERING - REQUIREMENTS GOVERNING ALGEBRAIC EQUATIONS - PART 7: RADIATION HEAT FLUX RECEIVED FROM AN OPEN POOL FIRE |
| ISO 834-8:2002 | Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements |
| DIN EN 15882-4:2012-07 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS |
| ISO 21927-2:2006 | Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators |
| 12/30259157 DC : 0 | BS EN 13381-2 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| CEI UNI EN 45545-1 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| CEI UNI EN 45545-4 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| DIN EN ISO 1182:2010-10 | REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST |
| UNI EN 15269-3 : 2012 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE TIMBER FRAMED WINDOWS |
| ISO 12136:2011 | Reaction to fire tests — Measurement of material properties using a fire propagation apparatus |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| DD ENV 13381-3:2002 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete members |
| PD ISO/TR 26368:2012 | Environmental damage limitation from fire-fighting water run-off |
| 11/30248570 DC : 0 | BS ISO 12468-1 - EXTERNAL EXPOSURE OF ROOFS TO FIRE - PART 1: TEST METHOD |
| BS ISO 26367-2:2017 | Guidelines for assessing the adverse environmental impact of fire effluents Methodology for compiling data on environmentally significant emissions from fires |
| I.S. EN 50553:2012 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| UNE-EN 15882-1:2013 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| 03/311411 DC : 0 | IEC 60695-1-11 ED.1 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
| BS EN 60695-7-1:2010 | Fire hazard testing Toxicity of fire effluent. General guidance |
| BS ISO 12472:2003 | Fire resistance of timber door assemblies. Method of determining the efficacy of intumescent seals |
| IEC TS 60695-1-40:2002 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| UNE-EN 15269-10:2015 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies |
| ISO 834-7:2000 | Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns |
| ISO 17554:2014 | Reaction to fire tests Mass loss measurement |
| DD CEN/TS 1187:2012 | Test methods for external fire exposure to roofs |
| 14/30301149 DC : 0 | BS EN 1366-2 - FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| 06/30116005 DC : DRAFT MAY 2006 | ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS |
| UNI EN 15269-7 : 2009 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 7: FIRE RESISTANCE FOR STEEL SLIDING DOORSETS |
| 16/30319040 DC : 0 | BS EN ISO 4589-1 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GUIDANCE |
| BS EN 60695-11-10:2013 | Fire hazard testing Test flames. 50 W horizontal and vertical flame test methods |
| DIN EN 15269-10:2011-07 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies |
| 04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS EN 60695-9-1:2013 | Fire hazard testing Surface spread of flame. General guidance |
| 03/308232 DC : DRAFT JUNE 2003 | EN 50399-2-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-1: PROCEDURE FOR CLASSIFICATION IN EUROCLASSES C AND D |
| 03/308233 DC : DRAFT JUNE 2003 | EN 50399-2-2 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-2: PROCEDURE FOR CLASSIFICATION IN EUROCLASS B |
| PD ISO/IEC GUIDE 37:2012 | Instructions for use of products by consumers |
| 08/30189150 DC : 0 | BS EN 13381-4 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION PRODUCTS TO STEEL MEMBERS |
| BS EN 12101-7:2011 | Smoke and heat control systems Smoke duct sections |
| PREN 45545-3 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| BS EN 45545-4:2013 | Railway applications. Fire protection on railway vehicles Fire safety requirements for rolling stock design |
| DIN EN ISO 25762:2012-04 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| CEI EN 60695-11-3 : 2013 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
| CEI EN 60695-11-5 : 2006 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| ONORM EN 1366-5 : 2010 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS |
| BS ISO 16737:2012 | Fire safety engineering. Requirements governing algebraic equations. Vent flows |
| 10/30216684 DC : 0 | BS EN 45545-1 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| ASTM D 3675 : 2017 : REDLINE | TEST METHOD FOR SURFACE FLAMMABILITY OF FLEXIBLE CELLULAR MATERIALS USING A RADIANT HEAT ENERGY SOURCE |
| 07/30169693 DC : 0 | BS EN 60695-11-11 - FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE IGNITION CHARACTERISTIC HEAT FLUX FROM A NON-CONTACTING FLAME SOURCE |
| 07/30169691 DC : 0 | BS EN 60695-2-13 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY (GWIT) TEST METHOD FOR MATERIALS |
| ISO 13784-2:2002 | Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms |
| BS EN 60332-1-1 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS |
| PREN 1365-2 : DRAFT 2012 | FIRE RSISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS |
| DIN EN 13501-6:2014-07 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| 16/30287218 DC : 0 | BS ISO 19021 - TEST METHOD FOR DETERMINATION OF GAS CONCENTRATIONS IN ISO 5659-2 USING FOURIER TRANSFORM INFRARED SPECTROSCOPY |
| ISO 13785-1:2002 | Reaction-to-fire tests for façades — Part 1: Intermediate-scale test |
| DIN EN 45545-1:2013-08 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| BS ISO 871:2006 | Plastics. Determination of ignition temperature using a hot-air furnace |
| DIN EN 1366-9:2008-08 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
| PD 476-3:2012 | Classification rules for the end-use application of test results arising from BS 476-3, \'Classification and method of test for external fire exposure of roofs\' |
| BS ISO 16733-1:2015 | Fire safety engineering. Selection of design fire scenarios and design fires Selection of design fire scenarios |
| 06/30117323 DC : 0 | ISO 20632 - ROOM TEST FOR PIPE INSULATION |
| 12/30273535 DC : 0 | IEC 60695-2-11 ED 2.0 - FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END PRODUCTS |
| BS EN 45545-1:2013 | Railway applications. Fire protection on railway vehicles General |
| ISO/TR 13387-4:1999 | Fire safety engineering — Part 4: Initiation and development of fire and generation of fire effluents |
| ASTM E 906/E906M : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method |
| 11/30252464 DC : 0 | BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| 09/30183765 DC : 0 | BS EN 60695-6-1 A1 ED.2 - FIRE HAZARD TESTING - PART 6-1: SOME OBSCURATION - GENERAL GUIDANCE |
| 15/30300929 DC : 0 | BS EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| DD CEN/TS 45545-1:2009 | Railway applications. Fire protection on railway vehicles General |
| BS EN 15650:2010 | Ventilation for buildings. Fire dampers |
| BS ISO 14934-2:2013 | Fire tests. Calibration and use of heat flux meters Primary calibration methods |
| UNE-EN 45545-3:2013 | Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
| 12/30254408 DC : 0 | BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS |
| BS ISO 3009:2003 | Fire resistance tests. Elements of building construction. Glazed elements |
| BS EN 60695-2-12 : 2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| BS ISO 29473:2010 | Fire tests. Uncertainty of measurements in fire tests |
| I.S. EN ISO 1716:2010 | REACTION TO FIRE TESTS FOR PRODUCTS - DETERMINATION OF THE GROSS HEAT OF COMBUSTION (CALORIFIC VALUE) |
| ENV 13381-6:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
| ISO/TR 12468-3:2014 | External exposure of roofs to fire Part 3: Commentary |
| ISO 30021:2013 | Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites |
| BS ISO 22899-1:2007 | Determination of the resistance to jet fires of passive fire protection materials General requirements |
| 07/30169689 DC : 0 | BS EN 60695-1-10 - FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| DD ENV 13381-6:2002 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns |
| CEI EN 60695-4 : 2013 | FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS |
| UNE-EN 13501-1:2007 | Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests |
| 09/30205350 DC : 0 | BS EN 60695-7-2 ED.1 - FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS |
| 05/19971310 DC : DRAFT JAN 2005 | EN 13501-4 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| 04/30111082 DC : DRAFT MARCH 2004 | IEC 61034-1 ED.3 - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1 - TEST APPARATUS |
| ASTM E 2957 : 2017 : REDLINE | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| S.R. CEN ISO/TS 80004-6:2015 | NANOTECHNOLOGIES - VOCABULARY - PART 6: NANO-OBJECT CHARACTERIZATION (ISO/TS 80004-6:2013) |
| DIN EN 16035:2013-03 | Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the interchangeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows |
| NF EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| DIN EN 15269-1:2010-07 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| EN 1366-5:2010 | Fire resistance tests for service installations - Part 5: Service ducts and shafts |
| I.S. EN 13381-2:2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| ISO/TR 16738:2009 | Fire-safety engineering Technical information on methods for evaluating behaviour and movement of people |
| DD CEN/TS 45545-6:2009 | Railway applications. Fire protection on railway vehicles Fire control and management systems |
| ISO/TR 26368:2012 | Environmental damage limitation from fire-fighting water run-off |
| UNI EN 13381-2 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| UNE-EN ISO 12863:2011 | Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010/Cor 1:2011) |
| I.S. EN 13381-5:2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER |
| AFAP-1 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS |
| PD IEC/TR 62757:2015 | Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible ac transmission systems (FACTS) and their valve halls |
| BS EN 15269-1:2010 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware General requirements |
| I.S. EN 16035:2012 | HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS |
| UNI EN 15269-10 : 2011 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES |
| NF EN 61034-2 : 2005 AMD 1 2013 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS |
| CEI EN 60695-1-10 : 2012 | FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| BS EN 15882-1 : 2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| S.R. CEN/TS 45545-6:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
| I.S. EN 13381-1:2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| BS EN 60695-6-1 : 2005 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
| I.S. EN 60695-4:2012 | FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012 (EQV)) |
| BS EN 61034-1 : 2005 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS |
| I.S. EN 13381-9:2015 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
| ISO 5658-2:2006 | Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration |
| CLC/TR 50670:2016 | External fire exposure to roofs in combination with photovoltaic (PV) arrays - Test method(s) |
| EN 15882-1:2011+A1:2017 | Extended application of results from fire resistance tests for service installations - Part 1: Ducts |
| PREN 50553 : DRAFT 2010 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| ISO 3009:2003 | Fire-resistance tests — Elements of building construction — Glazed elements |
| I.S. EN 60695-10-3:2016 | FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST |
| ISO 26367-2:2017 | Guidelines for assessing the adverse environmental impact of fire effluents — Part 2: Methodology for compiling data on environmentally significant emissions from fires |
| EN ISO 19353:2016 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) |
| PREN 15269-1 : DRAFT 2017 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| ISO 7076-6:2016 | Fire protection — Foam fire extinguishing systems — Part 6: Vehicle mounted compressed air foam systems |
| ISO 19703:2010 | Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
| S.R. CEN/TS 45545-4:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR RAILWAY ROLLING STOCK DESIGN |
| CEI EN 60695-7-1 : 2013 | FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE |
| I.S. EN 1364-5:2017 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 5: AIR TRANSFER GRILLES |
| I.S. EN 60695-7-3:2011 | FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS (IEC 60695-7-3:2011) |
| I.S. EN 60695-7-2:2011 | FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-7-2:2011) |
| ISO 834-11:2014 | Fire resistance tests — Elements of building construction — Part 11: Specific requirements for the assessment of fire protection to structural steel elements |
| UNE-EN 50399:2012 | Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results |
| I.S. CEN TR 14819-2:2006 | SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS |
| CEI EN 60695-10-2 : 2015 | FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD |
| I.S. EN 60695-1-11:2015 | FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
| UNI EN 15269-20 : 2009 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS |
| NF ISO 23932 : 2009 | FIRE SAFETY ENGINEERING - GENERAL PRINCIPLES |
| UNI EN 13381-1 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| UNI EN 1366-9 : 2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| NF EN 60695-2-13 : 2011 AMD 1 2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| NF ISO 16732-1 : 2012 | FIRE SAFETY ENGINEERING - FIRE RISK ASSESSMENT - PART 1: GENERAL |
| S.R. CEN/TS 45545-2:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ASTM D 350 : 2013 : REDLINE | Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM E 2102 : 2017 : REDLINE | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| EN 60695-6-1:2005/A1:2010 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
| IEC TS 60695-6-31:2013 | Fire hazard testing - Part 6-31: Smoke obscuration - Small-scale static test - Materials |
| IEC TS 60695-1-20:2008 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| IEC TS 60695-1-14:2017 | Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| DIN EN 1366-6:2005-02 | Fire resistance tests for service installations - Part 6: Raised access and hollow core floors; German version EN 1366-6:2004 |
| I.S. EN 60695-9-2:2014 | FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS |
| DIN EN 1365-6:2005-02 | Fire resistance tests for loadbearing elements - Part 6: Stairs; German version EN 1365-6:2004 |
| DIN EN ISO 5659-2:2016-02 (Draft) | PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017) |
| DIN EN 12101-6:2005-09 | Smoke and heat control systems - Part 6: Specification for pressure differential systems, Kits |
| DIN EN 1366-3:2009-07 | Fire resistance tests for service installations - Part 3: Penetration seals |
| DIN EN 1366-2:2015-09 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| DIN EN 12101-1:2006-06 | Smoke and heat control systems - Part 1: Specification for smoke barriers |
| DIN EN 1364-4:2014-05 | Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration |
| CEI EN 60695-6-2 : 2013 | FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS |
| DIN EN ISO 4589-3:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017) |
| DIN EN ISO 4589-1:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017) |
| DIN EN 14390:2007-04 | Fire test - Large-scale room reference test for surface products |
| IEC 60695-8-1:2016 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| BS EN 1366-4 : 2006 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS |
| DIN EN ISO 4589-2:2016-03 (Draft) | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| PD IEC/TR 62222:2012 | Fire performance of communication cables installed in buildings |
| UNE-EN 1364-3:2015 | Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly) |
| PD IEC/TR 60695-1-21:2008 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods |
| IEC 60695-7-2:2011 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
| BS EN ISO 15791-1:2013 | Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance |
| UNE-EN 13238:2011 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| I.S. EN 1366-1:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| EN 1366-1:2014 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| I.S. EN 13238:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
| I.S. EN 1365-1:2012 | FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS |
| I.S. EN 1366-4:2006 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS |
| I.S. EN ISO 4589-1:2017 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017) |
| DIN EN 1363-1:2012-10 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
| ONORM EN 15269-20 : 2009 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR HINGED AND PIVOTED STEEL, TIMBER AND METAL FRAMED GLAZED DOORSETS |
| I.S. EN 1365-2:2014 | FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS |
| I.S. EN 1364-4:2014 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION |
| I.S. EN 1634-3:2004 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES |
| I.S. EN 1364-1:2015 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS |
| I.S. EN 13501-3:2006 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS |
| I.S. EN ISO 4589-2:2017 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017) |
| DIN EN 1366-1:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| I.S. EN ISO 5659-2:2017 | PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:2017) |
| I.S. EN 13501-2:2016 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
| I.S. EN ISO 15791-1:2013 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014) |
| I.S. EN 1366-2:2015 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 2: FIRE DAMPERS |
| I.S. EN ISO 340:2013 | CONVEYOR BELTS - LABORATORY SCALE FLAMMABILITY CHARACTERISTICS - REQUIREMENTS AND TEST METHOD (ISO 340:2013) |
| I.S. EN ISO 13927:2015 | PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR (ISO 13927:2015) |
| EN 1366-4:2006+A1:2010 | Fire resistance tests for service installations - Part 4: Linear joint seals |
| I.S. EN 13501-5:2016 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS |
| DIN EN 13238:2010-06 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| I.S. EN ISO 4589-3:2017 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017) |
| EN 60332-1-2:2004/A11:2016 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004/A1:2015) |
| DIN EN 15269-7:2010-04 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets |
| I.S. EN 1366-3:2009 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS |
| NBR IEC 60695-2-10 : 2015 | FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
| NBR IEC 60695-2-12 : 2013 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| OVE/ONORM EN 60695-9-2 : 2015 | FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-9-2:2014) |
| CEI EN 60695-7-2 : 2013 | FIRE HAZARD TESTING - PART 7-2: TOXICITY OF FIRE EFFLUENT - SUMMARY AND RELEVANCE OF TEST METHODS |
| NBR IEC 60695-2-13 : 2013 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| OVE/ONORM EN 60695-6-1 : 2011 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE (IEC 60695-6-1:2005 + A1:2010) |
| OVE/ONORM EN 60695-4 : 2013 | FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012) |
| UNE-EN 13381-2:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes |
| UNE-EN 1634-1:2016 | Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows |
| DIN EN 1366-10:2011-07 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| 12/30250116 DC : 0 | BS ISO 834-11 - FIRE RESISTANCE TESTS - ELEMENTS OF BUILDING CONSTRUCTION - PART 11: SPECIFIC REQUIREMENTS FOR THE ASSESSMENT OF FIRE PROTECTION TO STRUCTURAL STEEL ELEMENTS |
| I.S. EN 12101-8:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| PREN 45545-6 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
| 14/30291693 DC : 0 | BS ISO 21927-7 - SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCTS SECTIONS |
| 16/30319043 DC : 0 | BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST |
| DD CEN/TS 13381-1:2005 | Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes |
| ISO/IEC Guide 37:2012 | Instructions for use of products by consumers |
| 08/30183661 DC : DRAFT SEP 2008 | BS ISO 29473 - FIRE TESTS - UNCERTAINTY OF MEASUREMENTS IN FIRE TESTS |
| BS ISO 19706:2011 | Guidelines for assessing the fire threat to people |
| BS EN 60695-11-4:2011 | Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method |
| 10/30216690 DC : 0 | BS EN 45545-3 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| BS EN 15080-8:2009 | Extended application of results from fire resistance tests Beams |
| 10/30216687 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| UNI CEN/TS 16459 : 2014 | EXTERNAL FIRE EXPOSURE OF ROOFS AND ROOF COVERINGS - EXTENDED APPLICATION OF TEST RESULTS FROM CEN/TS 1187 |
| 13/30234849 DC : 0 | BS EN ISO 13927 - PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR |
| BS EN 16733:2016 | Reaction to fire tests for building products. Determination of a building product\'s propensity to undergo continuous smouldering |
| PD CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations |
| 16/30340523 DC : 0 | BS EN 17020-4 - EXTENDED APPLICATION OF TEST RESULTS ON DURABILITY OF SELFCLOSING FOR DOORSETS AND OPENABLE WINDOWS - PART 4: DURABILITY OF SELF-CLOSING OF FIRE RESISTANCE HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS |
| NF ISO 26367-1 : 2011 | GUIDELINES FOR ASSESSING THE ADVERSE ENVIRONMENTAL IMPACT OF FIRE EFFLUENTS - PART 1: GENERAL |
| UNE-EN 60695-1-30:2017 | Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines |
| PREN 13381-10 : DRAFT 2016 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION |
| ISO 22899-1:2007 | Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements |
| 16/30284262 DC : 0 | BS ISO 26367-2 - GUIDELINES FOR ASSESSING THE ADVERSE ENVIRONMENTAL IMPACT OF FIRE EFFLUENTS - PART 2: METHODOLOGY FOR COMPILING DATA ON ENVIRONMENTALLY SIGNIFICANT EMISSIONS FROM FIRES |
| BS ISO 10294-5:2005 | Fire-resistance tests. Fire dampers for air distribution systems Intumescent fire dampers |
| BS EN 15269-7:2009 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance for steel sliding doorsets |
| 14/30287830 DC : 0 | BS EN 16733 - BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCTS PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
| ASTM E 2280 : 2017 : REDLINE | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| BS EN 15269-2:2012 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted steel doorsets |
| DD ENV 1187:2002 | Test methods for external fire exposure to roofs |
| UNE-EN 50577:2016 | Electric cables - Fire resistance test for unprotected electric cables (P classification) |
| 18/30369843 DC : DRAFT APR 2018 | BS ISO 11907-1 - PLASTICS - SMOKE GENERATION - DETERMINATION OF THE CORROSIVITY OF FIRE EFFLUENTS - PART 1: GENERAL REQUIREMENTS AND APPLICABILITY |
| BS EN 16035:2012 | Hardware performance sheet (HPS). Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows |
| BS EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| 17/30347436 DC : 0 | BS EN 15269-1 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| 14/30287765 DC : 0 | BS EN 60695-1-20/ED 1.0 - FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| BS EN 60695-1-20:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. General guidance |
| BS EN 15882-3:2009 | Extended applications of results from fire resistance tests for service installations Penetration seals |
| BS EN 60695-1-11:2015 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment |
| 05/30127781 DC : DRAFT JAN 2005 | IEC 60695-2-11 ED.2 - FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW WIRE FLAMMABILITY TEST METHODS FOR END PRODUCTS |
| 15/30302476 DC : 0 | BS EN 13501-2 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
| BS EN 15269-20:2009 | Extended application of test results for fire resistance and/ or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets |
| I.S. EN 50399:2011 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
| 13/30281097 DC : 0 | BS EN 60695-1-11 ED 2.0 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
| UNE-EN 16733:2016 | Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering |
| UNE-EN 60695-10-3:2017 | Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
| NF EN 60695-2-12 : 2011 AMD 1 2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| DIN EN 16733:2016-07 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
| PD ISO/TS 5660-4:2016 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Measurement of low levels of heat release |
| I.S. EN 1366-10:2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| 17/30359807 DC | BS ISO 24679-1. Fire safety engineering. Performance of structures in fire. Part 1. General |
| 12/30258900 DC : 0 | BS ISO 12468-2 - EXTERNAL FIRE EXPOSURE TO ROOFS - PART 2: CLASSIFICATION OF ROOFS |
| 11/30252238 DC : 0 | BS EN 1364-1 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS |
| 09/30171920 DC : DRAFT JAN 2009 | BS EN ISO 11925-2 - REACTION TO FIRE TESTS - IGNITABILITY OF BUILDING PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
| NFPA 270 : 2018 | STANDARD TEST METHOD FOR MEASUREMENT OF SMOKE OBSCURATION USING A CONICAL RADIANT SOURCE IN A SINGLE CLOSED CHAMBER |
| BS ISO 14934-4:2014 | Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests |
| BS ISO 10295-1:2007 | Fire tests for building elements and components. Fire testing of service installations Penetration seals |
| DD CEN/TS 45545-7:2009 | Railway applications. Fire protection on railway vehicles Fire safety requirements for flammable liquid and flammable gas installations |
| I.S. EN 45545-4:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| BS ISO 12828-1:2011 | Validation method for fire gas analysis Limits of detection and quantification |
| IEC 60695-11-2:2017 RLV | Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
| 14/30231508 DC : 0 | BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY |
| 12/30230305 DC : 0 | BS EN 60695-10-2 ED 3.0 - FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST |
| 16/30347433 DC : 0 | BS EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS |
| UNE-EN 12101-7:2013 | Smoke and heat control systems - Part 7: Smoke duct sections |
| CEI EN 60695-8-1 : 2009 | FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE |
| 10/30216699 DC : 0 | BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
| I.S. EN 60695-8-2:2017 | FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| BS ISO 16730-1:2015 | Fire safety engineering. Procedures and requirements for verification and validation of calculation methods General |
| BS ISO 834-10:2014 | Fire resistance tests. Elements of building construction Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
| BS PD CLC/TR 50670 : 2016 | EXTERNAL FIRE EXPOSURE TO ROOFS IN COMBINATION WITH PHOTOVOLTAIC (PV) ARRAYS - TEST METHOD(S) |
| BS EN 45545-3:2013 | Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers |
| UNE-EN 60695-7-1:2011 | Fire hazard testing -- Part 7-1: Toxicity of fire effluent - General guidance |
| BS ISO 16405:2015 | Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique |
| 14/30291624 DC : 0 | BS ISO 21927-8 - SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| BS EN 61034-2 : 2005 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS PART 2: TEST PROCEDURE AND REQUIREMENTS |
| BS EN 12101-8:2011 | Smoke and heat control systems Smoke control dampers |
| 12/30269145 DC : 0 | BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| BS ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| UNE-EN 13381-4:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
| UNE-EN 60695-8-1:2017 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| BS EN 13381-2:2014 | Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes |
| CEI 89-37 : 2014 | FIRE HAZARD TESTING - PART 8-3: HEAT RELEASE - HEAT RELEASE OF INSULATING LIQUIDS USED IN ELECTROTECHNICAL PRODUCTS |
| PREN 1364-1 : DRAFT 2011 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 1: WALLS |
| UNI CEN/TS 13381-1 : 2006 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| PREN 15269-20 : DRAFT 2017 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS |
| BS EN 60684-2:2011 | Flexible insulating sleeving Methods of test |
| BS ISO 13927 : 2001 AMD 14411 | PLASTICS - SIMPLE HEAT RELEASE TEST USING A CONICAL RADIANT HEATER AND A THERMOPILE DETECTOR |
| 05/30137099 DC : 0 | ISO 5925-1 - FIRE TESTS - SMOKE CONTROL DOOR AND SHUTTER ASSEMBLIES - PART 1: AMBIENT AND MEDIUM TEMPERATURE LEAKAGE TEST PROCEDURE |
| NF EN 61034-1 : 2005 AMD 1 2014 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS |
| I.S. EN 1366-12:2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| BS EN 60695-10-3:2016 | Fire hazard testing Abnormal heat. Mould stress relief distortion test |
| ISO 12828-1:2011 | Validation method for fire gas analysis — Part 1: Limits of detection and quantification |
| EN 50577:2015 | Electric cables - Fire resistance test for unprotected electric cables (P classification) |
| XP ISO/TS 14934-4 : 2007 XP | FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS |
| CEI EN 60695-11-2 : 2014 | FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| I.S. EN 15254-7:2012 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING CEILINGS - PART 7: METAL SANDWICH PANEL CONSTRUCTION |
| BS EN 1366-5:2010 | Fire resistance tests for service installations Service ducts and shafts |
| PREN 50577 : DRAFT 2012 | ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION) |
| UNE-EN 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| ISO/TR 13387-1:1999 | FIRE SAFETY ENGINEERING - PART 1: APPLICATION OF FIRE PERFORMANCE CONCEPTS TO DESIGN OBJECTIVES |
| DD ENV 13381-2:2002 | Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes |
| IEC 60695-1-12:2015 | Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering |
| UNE-EN 60332-1-1:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
| UNE-EN 13381-5:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member |
| I.S. EN 15080-8:2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS |
| ASTM E 2707 : 2015 : REDLINE | Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure |
| ISO/TR 15657:2013 | Fire resistance tests Guidelines for computational structural fire design |
| ISO 20632:2008 | Reaction-to-fire tests — Small room test for pipe insulation products or systems |
| I.S. ENV 1363-3:1999 | FIRE RESISTANCE TESTS - PART 3: VERIFICATION OF FURNACE PERFORMANCE |
| PREN 13381-1 : DRAFT 2011 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| BS EN 13501-6:2014 | Fire classification of construction products and building elements Classification using data from reaction to fire tests on electric cables |
| BS ISO 5658-2 : 2006 | REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION |
| NF EN 60695-2-10 : 2013 | FIRE HAZARD TESTING - PART 2-10: GLOWING/OUT-WIRE BASED TEST METHOD - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
| I.S. EN 60695-10-2:2014 | FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD |
| BS EN 1634-1 : 2014 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 1: FIRE RESISTANCE TEST FOR DOOR AND SHUTTER ASSEMBLIES AND OPENABLE WINDOWS |
| BS ISO 10294-4 : 2001 | FIRE RESISTANCE TESTS - FIRE DAMPERS FOR AIR DISTRIBUTION SYSTEMS - PART 4: TEST OF THERMAL RELEASE MECHANISM |
| ISO/TS 29761:2015 | Fire safety engineering — Selection of design occupant behavioural scenarios |
| BS EN 50399:2011 | Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results |
| UNI EN 15254-6 : 2014 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING |
| I.S. EN 15269-3:2012 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 3: FIRE RESISTANCE OF HINGED AND PIVOTED TIMBER DOORSETS AND OPENABLE |
| DIN EN 1366-12:2014-12 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| ISO 10294-5:2005 | Fire resistance tests — Fire dampers for air distribution systems — Part 5: Intumescent fire dampers |
| PREN 13501-6 : DRAFT 2017 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| I.S. EN 60695-1-40:2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| ISO/TS 3814:2014 | Standard tests for measuring reaction-to-fire of products and materials — Their development and application |
| ISO 16312-1:2016 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria |
| ISO/TS 14934-4:2007 | Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests |
| ASTM E 136 : 2016-02 | TEST METHOD FOR BEHAVIOUR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C |
| ISO/TR 16312-2:2007 | Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
| UNE-EN 15254-6:2015 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling |
| BIS IS 11000-1-40 : 2015 | FIRE HAZARD TESTING - PART 1: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - SECTION 40: INSULATING LIQUIDS |
| UNE-EN 15269-3:2016 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| PREN 45545-1 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| I.S. EN 60695-11-10:2013 | FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013 (EQV)) |
| CEI 89-29 : 2010 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| UNI EN 13501-1 : 2009 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| EN 1364-2:2018 | Fire resistance tests for non-loadbearing elements - Part 2: Ceilings |
| I.S. EN 13501-6:2014 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| I.S. ENV 1187:2002 | TEST METHODS FOR EXTERNAL FIRE EXPOSURE TO ROOFS |
| UNI EN 16035 : 2013 | HARDWARE PERFORMANCE SHEET (HPS) - IDENTIFICATION AND SUMMARY OF TEST EVIDENCE TO FACILITATE THE INTER-CHANGEABILITY OF BUILDING HARDWARE FOR APPLICATION TO FIRE RESISTING AND/OR SMOKE CONTROL DOORSETS AND/OR OPENABLE WINDOWS |
| PREN 13381-5 : DRAFT 2011 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS |
| I.S. EN 60695-6-2:2011 | FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011) |
| ASTM D 1230 : 2017 : REDLINE | Standard Test Method for Flammability of Apparel Textiles |
| UNE-EN 15269-5:2016 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows |
| ASTM E 2632/E2632M : 2013 | Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials |
| UNI CEI EN 45545-3 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| CEI EN 60695-10-3 : 2004 | FIRE HAZARD TESTING - PART 10-3: ABNORMAL HEAT - MOULD STRESS RELIEF DISTORTION TEST |
| ASTM E 1822 : 2017 : REDLINE | Standard Test Method for Fire Testing of Stacked Chairs |
| ASTM E 1776 : 2016 : REDLINE | Standard Guide for Development of Fire-Risk-Assessment Standards |
| ASTM F 1870 : 2016 : REDLINE | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| ISO 14934-4:2014 | Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests |
| IEC TS 60695-8-3:2008 | Fire hazard testing - Part 8-3: Heat release - Heat release of insulating liquids used in electrotechnical products |
| ONORM EN 1366-12 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| ISO/TS 5660-3:2012 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
| ISO 12949:2011 | Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets |
| ISO/TR 834-2:2009 | Fire-resistance tests Elements of building construction Part 2: Guidance on measuring uniformity of furnace exposure on test samples |
| ISO 16110-1:2007 | Hydrogen generators using fuel processing technologies Part 1: Safety |
| ISO 21367:2007 | Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
| EN 15269-11:2018 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains |
| BS EN 13501-1 : 2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| ISO/TR 5659-3:1999 | Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method |
| ISO 16730-1:2015 | Fire safety engineering Procedures and requirements for verification and validation of calculation methods Part 1: General |
| ISO 26367-1:2011 | Guidelines for assessing the adverse environmental impact of fire effluents Part 1: General |
| ISO 871:2006 | Plastics Determination of ignition temperature using a hot-air furnace |
| ISO 10295-2:2009 | Fire tests for building elements and components Fire testing of service installations Part 2: Linear joint (gap) seals |
| IEC TR 60695-8-2:2008 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| DIN EN 1366-4:2010-08 | Fire resistance tests for service installations - Part 4: Linear joint seals (includes Amendment A1:2010) |
| DIN EN 1365-1:2013-08 | FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS |
| DIN EN 1366-7:2004-09 | Fire resistance tests for service installations - Part 7: Conveyor systems and their closures |
| DIN EN 1365-5:2005-02 | Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways; German version EN 1365-5:2004 |
| DIN EN 1365-2:2015-02 | FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS |
| DIN EN 1634-3:2005-01 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES |
| DIN EN 14470-2:2006-11 | Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders |
| DIN EN ISO 13927:2015-08 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| DIN EN 14470-1:2004-07 | Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
| BS EN 60695-1-21:2016 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods |
| BS EN 1365-5:2004 | Fire resistance tests for loadbearing elements Balconies and walkways |
| UNE-EN 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| IEC TS 60695-9-2:2005 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| IEC 60695-6-2:2011 | Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods |
| IEC 60695-5-1:2002 | Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
| BS EN ISO 4589-3:2017 | Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test |
| IEC 60695-9-2:2014 | Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods |
| UNE-EN 1365-1:2016 | Fire resistance tests for loadbearing elements - Part 1: Walls |
| IEC 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| IEC 61034-1:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
| ISO/TR 10093:2017 | Plastics Fire tests Standard ignition sources |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| EN 13381-1:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes |
| UNE-EN 60332-1-3:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
| I.S. EN ISO 1182:2010 | REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST |
| ONORM EN 13381-1 : 2014 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| UNI EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| UNE-EN 15269-1:2011 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements |
| ONORM EN 1366-1 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS |
| UNE-EN 13501-4:2007 | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems |
| UNE-EN 60332-1-2:2005 | Tests on electric and optical fibre cables under fire conditions -- Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| ASTM E 603 : 2017 : REDLINE | Standard Guide for Room Fire Experiments |
| ASTM D 6113 : 2016 : REDLINE | Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables |
| ONORM EN 15269-1 : 2010 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| EN 15269-20:2009 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets |
| I.S. EN 13823:2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN 13501-1:2007+A1:2009 | Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests |
| ONORM EN ISO 1182 : 2010 | REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST |
| UNI EN ISO 1182 : 2010 | REACTION TO FIRE TESTS FOR PRODUCTS - NON-COMBUSTIBILITY TEST |
| UNI EN 13823 : 2014 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN ISO 15791-1:2013 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| I.S. EN 12101-6:2005 | SMOKE AND HEAT CONTROL SYSTEMS - PART 6: SPECIFICATION FOR PRESSURE DIFFERENTIAL SYSTEMS - KITS |
| UNI EN 1366-8 : 2005 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 8: SMOKE EXTRACTION DUCTS |
| UNI EN ISO 15791-1 : 2014 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
| EN 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| ENV 1363-3:1998 | Fire resistance tests - Part 3: Verification of furnace performance |
| UNI EN ISO 340 : 2013 | CONVEYOR BELTS - LABORATORY SCALE FLAMMABILITY CHARACTERISTICS - REQUIREMENTS AND TEST METHOD |
| UNI EN 1634-3 : 2005 | FIRE RESISTANCE AND SMOKE CONTROL TESTS FOR DOOR AND SHUTTER ASSEMBLIES, OPENABLE WINDOWS AND ELEMENTS OF BUILDING HARDWARE - PART 3: SMOKE CONTROL TEST FOR DOOR AND SHUTTER ASSEMBLIES |
| EN 13381-6:2012 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
| UNI EN 1364-3 : 2014 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY) |
| UNI EN 1365-6 : 2005 | FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 6: STAIRS |
| UNI EN ISO 9239-1 : 2010 | REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE |
| UNI EN 1364-4 : 2014 | FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION |
| UNI EN 13501-3 : 2009 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 3: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON PRODUCTS AND ELEMENTS USED IN BUILDING SERVICE INSTALLATIONS: FIRE RESISTING DUCTS AND FIRE DAMPERS |
| UNI EN 1365-2 : 2014 | FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS |
| CLC/TS 45545-5:2009 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| UNI EN 13238 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - CONDITIONING PROCEDURES AND GENERAL RULES FOR SELECTION OF SUBSTRATES |
| UNE-EN 1366-10:2016 | Fire resistance tests for service installations - Part 10: Smoke control dampers |
| 08/30186613 DC : DRAFT OCT 2008 | BS EN 13381-5 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBERS |
| DD IEC/TS 60695-2-20:2004 | Fire hazard testing Glowing/hot wire based test methods - Hot-wire coil ignitability. Apparatus, test method and guidance |
| DIN 18230-3:2002-08 | STRUCTURAL FIRE PROTECTION IN INDUSTRIAL BUILDINGS - PART 3: VALUES FOR CALCULATION |
| I.S. EN 15269-11:2018+AC:2019 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 11: FIRE RESISTANCE FOR OPERABLE FABRIC CURTAINS |
| DD ENV 13381-5:2002 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet composite members |
| BS EN 13381-6:2012 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns |
| I.S. EN 60695-1-21:2016 | FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS |
| ENV 13381-2:2002 | Test methods for determining the contribution to the fire resistance of stuctural members - Part 2: Vertical protective membranes |
| ENV 13381-3:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members |
| 09/30206609 DC : 0 | BS EN 60695-11-10 ED.2 - FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS |
| 12/30255590 DC : 0 | BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES |
| BS ISO 9772:2012 | Cellular plastics. Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| 13/30267104 DC : 0 | BS EN 13381-9 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
| UNI CEI CEN/TS 45545-3 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| 16/30321760 DC : 0 | BS ISO 12992 - PLASTICS - VERTICAL FLAME SPREAD DETERMINATION FOR FILM AND SHEET |
| ISO/TR 834-3:2012 | Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
| UNE-EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| 08/30186609 DC : DRAFT OCT 2008 | BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| I.S. EN 60684-2:2011 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011) |
| PREN 50399-2-2 : DRAFT 2003 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-2: PROCEDURE FOR CLASSIFICATION IN EUROCLASS B |
| UNI EN 13381-4 : 2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
| 03/110116 DC : DRAFT JULY 2003 | EN ISO 340 - CONVEYOR BELTS - LABORATORY-SCALE FLAMMABILITY CHARACTERISTICS - REQUIREMENTS AND TEST METHOD |
| BS ISO 21927-7:2017 | Smoke and heat control systems Smoke ducts sections |
| BS ISO 13344:2015 | Estimation of the lethal toxic potency of fire effluents |
| I.S. EN 60695-2-13:2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| DIN EN 13381-2:2014-12 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| 08/30186617 DC : DRAFT OCT 2008 | BS EN 13381-6 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
| ISO 19706:2011 | Guidelines for assessing the fire threat to people |
| 17/30348256 DC : 0 | BS EN 13501-6 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| ASTM E 2067 : 2015 : REDLINE | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| 09/30186600 DC : 0 | BS EN 13381-1 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| BS ISO 12992:2017 | Plastics. Vertical flame spread determination for film and sheet |
| BS EN 60695-2-13 : 2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| I.S. EN 50575:2014 | POWER, CONTROL AND COMMUNICATION CABLES - CABLES FOR GENERAL APPLICATIONS IN CONSTRUCTION WORKS SUBJECT TO REACTION TO FIRE REQUIREMENTS |
| BS EN 15269-3:2012 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| DD CEN/TS 45545-4:2009 | Railway applications. Fire protection on railway vehicles Fire safety requirements for railway rolling stock design |
| BS EN 60695-4:2012 | Fire hazard testing Terminology concerning fire tests for electrotechnical products |
| 10/30207740 DC : 0 | BS ISO 12949 - STANDARD TEST METHOD FOR MEASURING THE HEAT RELEASE RATE OF LOW FLAMMABILITY MATTRESSES AND MATTRESS SET |
| ISO/TR 13387-2:1999 | Fire safety engineering Part 2: Design fire scenarios and design fires |
| BS EN 60332-1-3 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES |
| DIN EN 13381-6:2012-09 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
| 09/30202122 DC : 0 | BS ISO 12863 - STANDARD TEST METHOD FOR MEASURING THE IGNITION PROPENSITY OF CIGARETTES |
| BS EN 13381-1:2014 | Test methods for determining the contribution to the fire resistance of structural members Horizontal protective membranes |
| ASTM E 2257 : 2017 : REDLINE | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| 17/30348262 DC : 0 | BS EN 13501-1 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS |
| BS EN 15377-1:2008 | Heating systems in buildings. Design of embedded water based surface heating and cooling systems Determination of the design heating and cooling capacity |
| ISO/TS 17431:2006 | Fire tests— Reduced-scale model box test |
| UNI EN 15080-8 : 2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS |
| PREN 50200 : DRAFT 2013 | METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
| DIN EN 13381-4:2013-08 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
| 16/30323587 DC : DRAFT JAN 2016 | BS EN ISO 5659-2 - PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST |
| PD ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace |
| I.S. EN 60695-11-4:2011 | FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011) |
| 03/110059 DC : 0 | BS EN 45545-4 - RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS OF RAILWAY ROLLING STOCK DESIGN |
| ISO 10295-1:2007 | Fire tests for building elements and components — Fire testing of service installations — Part 1: Penetration seals |
| DD ISO/TS 22269:2005 | Reaction to fire tests. Fire growth. Full-scale test for stairs and stair coverings |
| 12/30271389 DC : 0 | BS EN 1365-2 - FIRE RSISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 2: FLOORS AND ROOFS |
| 14/30280977 DC : 0 | BS ISO 5660-4 - REACTION-TO-FIRE TESTS - HEAT RELEASE, SMOKE PRODUCTION AND MASS LOSS RATE - PART 4: MEASUREMENT OF HEAT RELEASE FOR DETERMINATION OF LOW LEVELS OF COMBUSTIBILITY |
| BS ISO/TR 5659-3:1999 | Plastics. Smoke generation Determination of optical density by a dynamic flow method |
| ISO 834-12:2012 | Fire resistance tests Elements of building construction Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces |
| 04/30124505 DC : 0 | EN 15080-8 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS |
| BS ISO 834-11:2014 | Fire resistance tests. Elements of building construction Specific requirements for the assessment of fire protection to structural steel elements |
| BS EN 13381-4:2013 | Test methods for determining the contribution to the fire resistance of structural members Applied passive protection products to steel members |
| BS EN 1366-12:2014 | Fire resistance tests for service installations Non-mechanical fire barrier for ventilation ductwork |
| DD ENV 13381-7:2002 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to timber members |
| PD ISO/TS 13447:2013 | Fire safety engineering. Guidance for use of fire zone models |
| UNI CEI CEN/TS 45545-2 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| 11/30252455 DC : 0 | BS EN 1364-4 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 4: CURTAIN WALLING - PART CONFIGURATION |
| DIN EN 12101-8:2011-08 | Smoke and heat control systems - Part 8: Smoke control dampers |
| BS EN 60695-11-5:2017 | Fire hazard testing Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance |
| ISO/TR 22899-2:2013 | Determination of the resistance to jet fires of passive fire protection Part 2: Guidance on classification and implementation methods |
| ISO 21927-3:2006 | Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators |
| 03/308231 DC : 0 | EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS |
| 05/30127789 DC : DRAFT JAN 2005 | IEC 60695-2-13 ED.2 - FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITABILITY TEST METHOD FOR MATERIALS |
| I.S. EN 1366-9:2008 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS |
| 12/30259154 DC : 0 | BS EN 13381-3 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| 11/30196234 DC : 0 | BS EN ISO 5659-2 - PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST |
| DIN EN 45545-4:2015-11 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
| 11/30252458 DC : 0 | BS EN 1364-3 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 3: CURTAIN WALLING - FULL CONFIGURATION (COMPLETE ASSEMBLY) |
| PD ISO/TR 16576:2017 | Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria |
| BS EN 60695-7-2:2011 | Fire hazard testing Toxicity of fire effluent. Summary and relevance of test methods |
| 07/30169687 DC : 0 | BS EN 60695-1-11 - FIRE HAZARD TESTING - PART 1-11: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - FIRE HAZARD ASSESSMENT |
| UNI CEI CLC/TS 45545-5 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| UNI EN 12101-8 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 8: SMOKE CONTROL DAMPERS |
| BS EN ISO 19353:2016 | Safety of machinery. Fire prevention and fire protection |
| 09/30206605 DC : 0 | BS EN 60695-2-10 ED.2 - FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE |
| UNI EN 15650 : 2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| BS EN 60695-11-20:2015 | Fire hazard testing Test flames. 500 W flame test methods |
| UNI CEI CEN/TS 45545-1 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 1: GENERAL |
| I.S. EN 60695-6-1:2005 | FIRE HAZARD TESTING - PART 6-1: SMOKE OBSCURATION - GENERAL GUIDANCE |
| ISO/TR 13387-3:1999 | Fire safety engineering Part 3: Assessment and verification of mathematical fire models |
| ASTM E 1740 : 2015 : REDLINE | Standard Test Method for Determining the Heat Release Rate and Other<brk/> Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter |
| I.S. CLC/TR 50670:2016 | EXTERNAL FIRE EXPOSURE TO ROOFS IN COMBINATION WITH PHOTOVOLTAIC (PV) ARRAYS - TEST METHOD(S) |
| UNI EN 15882-3 : 2009 | EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS |
| UNI EN 2826 : 2012 | AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF GAS COMPONENTS IN THE SMOKE |
| PD IEC/TS 60695-1-14:2017 | Fire hazard testing Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products |
| UNE-EN 60695-11-4:2012 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| BS EN ISO 1716:2010 | Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value) |
| DD CEN/TS 45545-2:2009 | Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components |
| ISO 12468-2:2013 | External exposure of roofs to fire Part 2: Classification of roofs |
| UNI EN 15882-4 : 2012 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS |
| ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
| BS ISO 21927-2 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 2: SPECIFICATION FOR NATURAL SMOKE AND HEAT EXHAUST VENTILATORS |
| ISO/TS 24679:2011 | Fire safety engineering Performance of structures in fire |
| UNE-EN 60695-2-11:2015 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| I.S. EN 15254-6:2014 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 6: CURTAIN WALLING |
| I.S. EN ISO 25762:2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009) |
| I.S. EN 13381-8:2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
| UNE-EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| ISO 12863:2010 | Standard test method for assessing the ignition propensity of cigarettes |
| ISO 6944-2:2009 | Fire containment Elements of building construction Part 2: Kitchen extract ducts |
| S.R. CLC/TS 45545-5:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| I.S. EN 60695-1-10:2017 | FIRE HAZARD TESTING - PART 1-10: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - GENERAL GUIDELINES |
| I.S. EN 60695-11-3:2012 | FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS (IEC 60695-11-3:2012 (EQV)) |
| ISO 13571:2012 | Life-threatening components of fire — Guidelines for the estimation of time to compromised tenability in fires |
| ISO 12472:2003 | Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals |
| ISO/TS 13447:2013 | Fire safety engineering — Guidance for use of fire zone models |
| I.S. EN 60695-1-20:2016 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| I.S. EN 15882-4:2012 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS |
| S.R. CEN/TS 45545-3:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| I.S. EN 60695-8-1:2017 | FIRE HAZARD TESTING - PART 8-1: HEAT RELEASE - GENERAL GUIDANCE |
| ISO/TR 17252:2008 | Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering |
| ISO 5658-4:2001 | Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| UNE-EN 60695-7-3:2012 | Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results |
| I.S. EN 12101-7:2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| EN 60695-4:2012 | FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS (IEC 60695-4:2012) |
| I.S. EN ISO 12863:2010 | STANDARD TEST METHOD FOR ASSESSING THE IGNITION PROPENSITY OF CIGARETTES |
| ISO 3008:2007 | Fire-resistance tests Door and shutter assemblies |
| ISO/TS 5660-4:2016 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 4: Measurement of low levels of heat release |
| 16/30324101 DC : 0 | BS EN 13381-10 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| PREN 45545-4 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| 16/30324104 DC : 0 | BS EN 1364-6 - FIRE RESISTANCE TESTS FOR NON-LOADBEARING ELEMENTS - PART 6: CAVITY BARRIERS |
| BS EN 60695-1-30:2017 | Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process. General guidelines |
| 17/30304297 DC : 0 | BS EN 17084 - RAILWAY APPLICATIONS - FIRE PROTECTION IN RAILWAY VEHICLES - TOXICITY TEST OF MATERIALS AND COMPONENTS |
| UNI EN 1366-5 : 2010 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS |
| EN 13501-6:2014 | Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables |
| 17/30296747 DC : 0 | BS EN 15650 - VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| ISO/TR 24679-4:2017 | Fire safety engineering — Performance of structures in fire — Part 4: Example of a fifteen-storey steel-framed office building |
| BS ISO 26367-1:2011 | Guidelines for assessing the adverse environmental impact of fire effluents General |
| 15/30327624 DC : 0 | BS EN 15269-6 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 6: FIRE RESISTANCE OF SLIDING TIMBER DOORSETS |
| ISO/TS 15791-2:2017 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products |
| PREN 13501-4 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 4: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS ON COMPONENTS OF SMOKE CONTROL SYSTEMS |
| CEI EN 60695-7-3 : 2013 | FIRE HAZARD TESTING - PART 7-3: TOXICITY OF FIRE EFFLUENT - USE AND INTERPRETATION OF TEST RESULTS |
| ASTM E 2632/E2632M : 2013 : EDT 1 | Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials |
| ISO 21927-8:2017 | Smoke and heat control systems — Part 8: Smoke control dampers |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| ISO 5660-4:2008 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility |
| ISO/TR 13571-2:2016 | Life-threatening components of fire Part 2: Methodology and examples of tenability assessment |
| ISO 5925-1:2007 | Fire tests — Smoke-control door and shutter assemblies — Part 1: Ambient- and medium-temperature leakage tests |
| ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| ISO/TR 15658:2009 | Fire resistance tests Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation |
| ISO 19701:2013 | Methods for sampling and analysis of fire effluents |
| ISO 14934-3:2012 | Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method |
| ISO/TS 19021:2018 | Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy |
| ISO 13784-1:2014 | Reaction to fire test for sandwich panel building systems — Part 1: Small room test |
| S.R. CEN/TS 45545-7:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
| ISO 14696:2009 | Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) |
| IEC TS 60695-11-40:2002 | Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance |
| IEC TS 60695-11-11:2016 | Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source |
| IEC TS 60695-11-3:2004 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| ISO/TS 22269:2005 | Reaction to fire tests — Fire growth — Full-scale test for stairs and stair coverings |
| IEC TR 60695-1-21:2008 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| I.S. EN 60695-7-1:2010 | FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENTS - GENERAL GUIDANCE |
| I.S. EN 15882-3:2009 | EXTENDED APPLICATIONS OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS |
| I.S. EN 61034-2:2005 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS (IEC 61034-2:2005 (EQV)) |
| DIN EN 13823:2015-02 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| IEC 60695-1-30:2017 | Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines |
| IEC TS 60695-11-21:2005 | Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials |
| I.S. CEN/TS 15447:2006 | MOUNTING AND FIXING IN REACTION TO FIRE TESTS UNDER THE CONSTRUCTION PRODUCTS DIRECTIVE |
| ISO 16730:2008 | Fire safety engineering Assessment, verification and validation of calculation methods |
| I.S. EN 2826:2011 | AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF GAS COMPONENTS IN THE SMOKE |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| DIN EN 1366-8:2004-10 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts; German version EN 1366-8:2004 |
| ISO 16732-1:2012 | Fire safety engineering — Fire risk assessment — Part 1: General |
| UNE-EN ISO 13927:2016 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| BS EN 13823:2010+A1:2014 | Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item |
| BS EN 12101-6:2005 | Smoke and heat control systems Specification for pressure differential systems. Kits |
| IEC 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| UNE-EN ISO 11925-2:2011 | Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010) |
| BS EN 14135:2004 | Coverings. Determination of fire protection ability |
| BS EN ISO 4589-2:2017 | Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test |
| IEC 60695-11-4:2011 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| ONORM EN 1363-1 : 2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
| ISO 13927:2015 | Plastics — Simple heat release test using a conical radiant heater and a thermopile detector |
| ISO/TS 80004-6:2013 | Nanotechnologies Vocabulary Part 6: Nano-object characterization |
| IEC 60695-9-1:2013 | Fire hazard testing - Part 9-1: Surface spread of flame - General guidance |
| IEC TS 60695-7-3:2004 | Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results |
| BS EN 1366-1:2014 | Fire resistance tests for service installations Ventilation ducts |
| DD IEC TS 60695-9-2 : DRAFT 2005 | FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS |
| IEC 60332-1-3:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for determination of flamingdroplets/particles |
| BS IEC/TS 60695-8-2:2001 | Fire hazard testing. Heat release Summary and relevance of test methods |
| EN 15269-1:2010 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements |
| BS EN ISO 4589-1:2017 | Plastics. Determination of burning behaviour by oxygen index General requirements |
| UNI EN 1363-1 : 2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
| BS EN 13501-2 : 2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
| UNE-EN 15650:2010 | Ventilation for buildings - Fire dampers |
| BS IEC TS 60695-9.2 : 2001 | FIRE HAZARD TESTING - PART 9-2 - SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS |
| BS EN 1364-4:2014 | Fire resistance tests for non-loadbearing elements Curtain walling. Part configuration |
| BS EN 60695-9-2:2014 | Fire hazard testing Surface spread of flame. Summary and relevance of test methods |
| BS EN 60695-8-2:2017 | Fire hazard testing Heat release. Summary and relevance of test methods |
| BS EN 1366-3:2009 | Fire resistance tests for service installations Penetration seals |
| UNE-EN 1366-3:2011 | Fire resistance tests for service installations - Part 3: Penetration seals |
| BS EN ISO 11925-2:2010 | Reaction to fire tests. Ignitability of products subjected to direct impingement of flame Single-flame source test |
| IEC 60695-1-11:2014 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
| UNE-EN 1366-1:2016 | Fire resistance tests for service installations - Part 1: Ventilation ducts |
| 09/30193524 DC : 0 | BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY |
| UNE-EN 1365-2:2016 | Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
| UNE-EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| I.S. EN ISO 11925-2:2010 | REACTION TO FIRE TESTS - IGNITABILITY OF BUILDING PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
| BS EN 1363-1:2012 | Fire resistance tests General requirements |
| IEC 60695-1-21:2016 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| ISO 21542:2011 | Building construction Accessibility and usability of the built environment |
| UNE-EN ISO 15791-1:2014 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
| IEC 60695-6-1:2005+AMD1:2010 CSV | Fire hazard testing - Part 6-1: Smoke obscuration - General guidance |
| IEC 60695-4:2012 | Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
| IEC TS 62933-5-1:2017 | Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification |
| IEC 60684-2:2011 | Flexible insulating sleeving - Part 2: Methods of test |
| CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 |
| IEC 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
| IEC 60695-10-3:2016 | Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
| UNE-EN ISO 5659-2:2018 | Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| UNE-ISO 21542:2012 | Building construction. Accessibility and usability of the built environment. |
| UNE-ISO 16110-1:2015 | Hydrogen generators using fuel processing technologies -- Part 1: Safety |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
| ISO 4589-3:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test |
| BS EN 1366-8:2004 | Fire resistance tests for service installations Smoke extraction ducts |
| BS EN 1365-6:2004 | Fire resistance tests for loadbearing elements Stairs |
| IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
| ISO 4589-1:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements |
| BS EN 1364-3:2014 | Fire resistance tests for non-loadbearing elements Curtain walling. Full configuration (complete assembly) |
| IEC 60695-1-10:2016 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| BS EN ISO 13927:2015 | Plastics. Simple heat release test using a conical radiant heater and a thermopile detector |
| UNE-EN 1364-4:2015 | Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration |
| UNE-EN 60695-7-2:2012 | Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods |
| BS EN 1364-1:2015 | Fire resistance tests for non-loadbearing elements Walls |
| BS EN ISO 1182:2010 | Reaction to fire tests for products. Non-combustibility test |
| UNE-EN 60695-11-20:2016 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods |
| UNE-EN ISO 19353:2016 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) |
| UNE-EN 60695-11-10:2014 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| ISO 15791-1:2014 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance |
| BS EN 12101-1 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 1: SPECIFICATION FOR SMOKE BARRIERS |
| UNE-EN ISO 9239-1:2011 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| ISO 25762:2009 | Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| UNE-EN ISO 4589-3:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017) |
| UNE-EN 1366-2:2015 | Fire resistance tests for service installations - Part 2: Fire dampers |
| BS EN 1365-2:2014 | Fire resistance tests for loadbearing elements Floors and roofs |
| UNE-EN 60695-4:2012 | Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
| EN 1365-2:2014 | Fire resistance tests for loadbearing elements - Part 2: Floors and roofs |
| EN 15269-10:2011 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies |
| EN 15882-4:2012 | Extended application of results from fire resistance tests for service installations - Part 4: Linear joint seals |
| EN 14135:2004 | Coverings - Determination of fire protection ability |
| EN 1365-6:2004 | Fire resistance tests for loadbearing elements - Part 6: Stairs |
| EN 15269-3:2012 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| EN 1366-12:2014 | Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork |
| EN 15269-5:2014+A1:2016 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows |
| EN 1366-8:2004 | Fire resistance tests for service installations - Part 8: Smoke extraction ducts |
| UNI EN 1366-3 : 2009 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS |
| EN 15254-6:2014 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling |
| EN ISO 5659-2:2017 | Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) |
| EN 14470-1:2004 | Fire safety storage cabinets - Part 1: Safety storage cabinets for flammable liquids |
| EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| EN ISO 4589-1:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017) |
| EN 1364-3:2014 | Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly) |
| EN 14470-2:2006 | Fire safety storage cabinets - Part 2: Safety cabinets for pressurised gas cylinders |
| EN 2826:2011 | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke |
| EN 1366-9:2008 | Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts |
| EN 1364-4:2014 | Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration |
| EN 1365-5:2004 | Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways |
| EN 15269-7:2009 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets |
| EN 16035:2012 | Hardware performance sheet (HPS) - Identification and summary of test evidence to facilitate the inter-changeability of building hardware for application to fire resisting and/or smoke control doorsets and/or openable windows |
| EN 14390:2007 | Fire test - Large-scale room reference test for surface products |
| EN 1366-10:2011+A1:2017 | Fire resistance tests for service installations - Part 10: Smoke control dampers |
| EN ISO 4589-3:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017) |
| EN 15080-8:2009 | Extended application of results from fire resistance tests - Part 8: Beams |
| EN ISO 25762:2012 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| EN 1364-1:1999 | Fire resistance tests for non-loadbearing elements - Part 1: Walls |
| EN 15882-3:2009 | Extended applications of results from fire resistance tests for service installations - Part 3: Penetration seals |
| EN ISO 4589-2:2017 | Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017) |
| EN 15269-2:2012 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets |
| EN ISO 13927:2015 | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2015) |
| EN 16733:2016 | Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering |
| EN ISO 340:2013 | Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013) |
| EN 1366-6:2004 | Fire resistance tests for service installations - Part 6: Raised access and hollow core floors |
| EN 15650:2010 | Ventilation for buildings - Fire dampers |
| EN 1364-5:2017 | Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles |
| ISO 3008-2:2017 | Fire-resistance tests — Part 2: Lift landing door assemblies |
| S.R. CEN/TS 45545-1:2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| ISO/TR 12470-1:2017 | Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 1: Loadbearing elements and vertical and horizontal separating elements |
| DIN EN 13381-3:2015-06 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 3: APPLIED PROTECTION TO CONCRETE MEMBERS |
| BS ISO 10295-2:2009 | Fire tests for building elements and components. Fire testing of service installations Linear joint (gap) seals |
| UNE-EN 60695-1-10:2017 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| 07/30172821 DC : 0 | BS ISO 10295-2 - FIRE TESTS FOR BUILDING ELEMENTS AND COMPONENTS - FIRE TESTING OF SERVICE INSTALLATIONS - PART 2: LINEAR JOINT (GAP) SEALS |
| 13/30282376 DC : 0 | BS EN 50200 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS |
| BS EN ISO 25762:2012 | Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| DD IEC TS 60695-1-20 : DRAFT MAR 2008 | FIRE HAZARD TESTING - PART 1-20: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - GENERAL GUIDANCE |
| 12/30260450 DC : 0 | BS EN 50577 - ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION) |
| BS EN 60695-8-1:2017 | Fire hazard testing Heat release. General guidance |
| ISO 23932:2009 | Fire safety engineering General principles |
| DD ISO/TS 24679:2011 | Fire safety engineering. Performance of structures in fire |
| DD ENV 13381-4:2002 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to steel members |
| NF ISO 13344 : 2016 | ESTIMATION OF THE LETHAL TOXIC POTENCY OF FIRE EFFLUENTS |
| 13/30292037 DC : 0 | BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS |
| PREN 13501-1 : DRAFT 2017 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS |
| 06/30090268 DC : DRAFT FEB 2006 | ISO 21489 - FIRE TESTS - METHOD OF MEASUREMENT OF GASES USING FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR) IN CUMULATIVE SMOKE TEST |
| 01/208798 DC : DRAFT JAN 2002 | IEC 60695-5-3 TS - FIRE HAZARD TESTING - PART 5-3: CORROSION DAMAGEEFFECTS OF FIRE EFFLUENT - LEAKAGE CURRENT AND METAL LOSS TEST METHOD |
| BS EN 60695-11-2:2017 | Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance |
| 10/30216236 DC : DRAFT JAN 2010 | BS EN 60695-11-4 - FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHODS |
| 16/30331280 DC (published 2016-04) | BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies |
| BS ISO 27368:2008 | Analysis of blood for asphyxiant toxicants. Carbon monoxide and hydrogen cyanide |
| XP ISO/TS 24679 : 2011 XP | FIRE SAFETY ENGINEERING - PERFORMANCE OF STRUCTURES IN FIRE |
| UNI CEI EN 45545-4 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| I.S. ENV 13381-7:2002 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 7: APPLIED PROTECTION TO TIMBER MEMBERS |
| BS ISO/TR 13387-3:1999 | Fire safety engineering Assessment and verification of mathematical fire models |
| IEC TS 60695-8-2:2000 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| UNE-EN 15269-2:2016 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets |
| 10/30216933 DC : 0 | BS EN 50553 - RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| UNE-EN 60695-11-3:2013 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| UNE-EN 12101-8:2015 | Smoke and heat control systems - Part 8: Smoke control dampers |
| DD IEC/TS 60695-11-4:2004 | Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method |
| DIN EN 45545-3:2013-08 | Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers; German version EN 45545-3:2013 |
| BS EN 50577:2015 | Electric cables. Fire resistance test for unprotected electric cables (P classification) |
| I.S. EN 15269-2:2012 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS |
| BS ISO 21927-3 : 2006 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT EXHAUST VENTILATORS |
| DD CEN/TS 15447:2006 | Mounting and fixing in reaction to fire tests under the Construction Products Directive |
| EN 15254-7:2018 | Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction |
| PREN 13501-2 : DRAFT 2015 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 2: CLASSIFICATION USING DATA FROM FIRE RESISTANCE TESTS, EXCLUDING VENTILATION SERVICES |
| 04/30115497 DC : 0 | EN 45545-6 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
| CEI EN 60684-2 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST |
| UNI CEI CEN/TS 45545-6 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
| ONORM EN 1366-4 : 2010 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 4: LINEAR JOINT SEALS |
| 10/30198657 DC : 0 | BS EN 60695-7-1 - FIRE HAZARD TESTING - PART 7-1: TOXICITY OF FIRE EFFLUENT - GENERAL GUIDANCE |
| I.S. EN 13381-6:2012 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
| 04/30111085 DC : DRAFT MARCH 2004 | IEC 61064-2 ED.3 - MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2 - TEST PROCEDURE AND REQUIREMENTS |
| 12/30211334 DC : 0 | BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO/DIS 15791-1:2012) |
| 10/30219810 DC : 0 | BS EN 45545-5 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
| 08/30154274 DC : DRAFT MAR 2008 | BS ISO 25762 - PLASTICS - GUIDANCE ON THE ASSESSMENT OF FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED COMPOSITES |
| UNI EN 1366-12 : 2014 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 12: NON-MECHANICAL FIRE BARRIER FOR VENTILATION DUCTWORK |
| DIN EN 12101-7:2011-08 | Smoke and heat control systems - Part 7: Smoke duct sections |
| PD ISO/TS 5660-3:2012 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement |
| DIN EN 13381-1:2014-12 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 1: HORIZONTAL PROTECTIVE MEMBRANES |
| PREN 50399-2-1 : DRAFT 2003 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 2-1: PROCEDURE FOR CLASSIFICATION IN EUROCLASSES C AND D |
| PD ISO/TR 24679-4:2017 | Fire safety engineering. Performance of structures in fire Example of a fifteen-storey steel-framed office building |
| 08/30167713 DC : DRAFT JUNE 2008 | BS ISO 6944-2 - FIRE CONTAINMENT - ELEMENTS OF BUILDING CONSTRUCTION - KITCHEN EXTRACT DUCTS |
| UNE-EN 60695-2-13:2011 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials |
| 17/30357883 DC : 0 | BS IEC 60695-2-14 ED.1.0 - FIRE HAZARD TESTING - PART 2-14: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE TEST METHOD FOR END PRODUCTS (GWITEP) |
| DIN EN 15650:2010-09 | Ventilation for buildings - Fire dampers |
| PD ISO/TS 3814:2014 | Standard tests for measuring reaction-to-fire of products and materials. Their development and application |
| 10/30216693 DC : 0 | BS EN 45545-4 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| 05/30135949 DC : DRAFT JUL 2005 | IEC 60695-1-30 ED 2 - FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - USE OF PRESELECTION TESTING PROCEDURES |
| 08/30192184 DC : 0 | ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY |
| BS EN 13381-5:2014 | Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet steel composite member |
| UNE-EN 13381-6:2014 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
| UNE-ISO 16733-1:2017 | Fire safety engineering.Selection of design fire scenarios and design fires.Part 1: Selection of design fire scenarios |
| DIN EN 1366-5:2010-06 | Fire resistance tests for service installations - Part 5: Service ducts and shafts |
| IEC TS 60695-6-30:2013 | Fire hazard testing - Part 6-30: Smoke obscuration - Small-scale static method - Apparatus |
| BS EN 15269-5 : 2014 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 5: FIRE RESISTANCE OF HINGED AND PIVOTED METAL FRAMED GLAZED DOORSETS AND OPENABLE WINDOWS |
| BS ISO 5660-1:2015 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| DIN EN 15269-3:2012-10 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire resistance of hinged and pivoted timber doorsets and openable timber framed windows |
| 18/30370902 DC | BS ISO 3008-1. Fire resistance tests. Door and shutter assemblies Part 1. General requirements |
| I.S. EN ISO 19353:2016 | SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015) |
| PD ISO/TR 12470-2:2017 | Fire-resistance tests. Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Non-loadbearing elements |
| UNI CEI CEN/TS 45545-4 : 2009 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR RAILWAY ROLLING STOCK DESIGN |
| BS EN 1366-9:2008 | Fire resistance tests for service installations Single compartment smoke extraction ducts |
| UNI EN 1366-10 : 2011 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 10: SMOKE CONTROL DAMPERS |
| BS EN 60695-2-10:2013 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure |
| ASTM F 1550 : 2016 : REDLINE | Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter |
| NF ISO 19703 : 2010 | GENERATION AND ANALYSIS OF TOXIC GASES IN FIRE - CALCULATION OF SPECIES YIELDS, EQUIVALENCE RATIOS AND COMBUSTION EFFICIENCY IN EXPERIMENTAL FIRES |
| FD ISO/TR 16738 : 2009 FD | FIRE-SAFETY ENGINEERING - TECHNICAL INFORMATION ON METHODS FOR EVALUATING BEHAVIOUR AND MOVEMENT OF PEOPLE |
| 12/30252461 DC : DRAFT JAN 2012 | BS EN 13501-6 - FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 6: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS ON ELECTRIC CABLES |
| ISO 9239-2:2002 | Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2 |
| 08/30171902 DC : 0 | BS EN ISO 1182 - REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - NON-COMBUSTIBILITY TEST |
| BS EN 60332-1-2 : 2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-2: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR 1 KW PRE-MIXED FLAME (IEC 60332-1-2:2004) |
| BS EN 15882-4:2012 | Extended application of results from fire resistance tests for service installations Linear joint seals |
| 06/30153120 DC : DRAFT JULY 2006 | |
| UNE-EN 60695-1-11:2016 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
| 16/30291954 DC : 0 | BS ISO 24678 - FIRE SAFETY ENGINEERING - REQUIREMENTS GOVERNING ALGEBRAIC EQUATIONS - PART 6: FLASHOVER RELATED PHENOMENA |
| BS EN 15254-6:2014 | Extended application of results from fire resistance tests. Non-loadbearing walls Curtain walling |
| ISO 27368:2008 | Analysis of blood for asphyxiant toxicants — Carbon monoxide and hydrogen cyanide |
| UNE-EN 50575:2015 | Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements |
| 04/30090250 DC : DRAFT APR 2004 | BS ISO 14934-2 - REACTION TO FIRE TESTS - CALIBRATION AND USE OF HEAT FLUX METERS - PART 2: PRIMARY CALIBRATION METHODS |
| BS ISO 21927-8:2017 | Smoke and heat control systems Smoke control dampers |
| ENV 13381-5:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members |
| UNE-EN 1366-12:2015 | Fire resistance tests for service installations - Part 12: Non-mechanical fire barrier for ventilation ductwork |
| 13/30246948 DC : 0 | BS ISO 17554 - REACTION TO FIRE TESTS - MASS LOSS MEASUREMENT |
| 10/30216139 DC : 0 | BS EN 60695-11-3 - FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS |
| 06/30144845 DC : DRAFT JAN 2006 | IEC 60695-1-21 - FIRE HAZARD TESTING - PART 1-21: IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS |
| ASTM E 2335 : 2017 : REDLINE | Standard Guide for Laboratory Monitors |
| BS EN 15269-10:2011 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware Fire resistance of steel rolling shutter assemblies |
| BS ISO 25762 : 2009 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| 05/30134009 DC : DRAFT MAY 2005 | EN 15254-1 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 1: GENERAL |
| DD CEN/TS 45545-3:2009 | Railway applications. Fire protection on railway vehicles Fire resistance requirements for fire barriers |
| 08/30171906 DC : 0 | BS EN ISO 1716 - REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF THE HEAT OF COMBUSTION |
| 03/110060 DC : 0 | BS EN 45545-7 - RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
| CEI EN 60695-8-2 : 2ED 2017 | FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| ENV 13381-7:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members |
| BS ISO 21927-1:2008 | Smoke and heat control systems Specification for smoke barriers |
| IEC TS 60695-11-4:2004 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| UNI EN 12101-7 : 2011 | SMOKE AND HEAT CONTROL SYSTEMS - PART 7: SMOKE DUCT SECTIONS |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| UNE-EN 15269-7:2011 | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire resistance for steel sliding doorsets |
| I.S. EN 60695-2-12:2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| ISO 24678-6:2016 | Fire safety engineering — Requirements governing algebraic formulae — Part 6: Flashover related phenomena |
| UNI EN 13381-6 : 2012 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
| UNE-EN 13381-1:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes |
| I.S. EN 60332-1-1:2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-1: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - APPARATUS |
| ISO 834-5:2000 | Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements |
| CEI EN 60695-1-40 : 2014 | FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS |
| ISO/TR 16576:2017 | Fire safety engineering Examples of fire safety objectives, functional requirements and safety criteria |
| I.S. EN 13381-4:2013 | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
| UNE-ISO 23932:2017 | Fire safety engineering. General principles |
| I.S. EN 15269-10:2011 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 10: FIRE RESISTANCE OF STEEL ROLLING SHUTTER ASSEMBLIES |
| I.S. EN 15882-1:2011 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS |
| ISO 12468-1:2013 | External exposure of roofs to fire — Part 1: Test method |
| ISO 14934-1:2010 | Fire tests Calibration and use of heat flux meters Part 1: General principles |
| ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
| I.S. EN 45545-3:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| I.S. EN 16733:2016 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING |
| UNE-EN 15080-8:2011 | Extended application of results from fire resistance tests - Part 8: Beams |
| I.S. EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013 (EQV)) |
| ISO/TR 13387-6:1999 | Fire safety engineering Part 6: Structural response and fire spread beyond the enclosure of origin |
| I.S. EN 60332-1-3:2004 | TESTS ON ELECTRIC AND OPTICAL FIBRE CABLES UNDER FIRE CONDITIONS - PART 1-3: TEST FOR VERTICAL FLAME PROPAGATION FOR A SINGLE INSULATED WIRE OR CABLE - PROCEDURE FOR DETERMINATION OF FLAMING DROPLETS/PARTICLES |
| DIN EN 13501-1:2010-01 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| PD CEN/TS 16459:2013 | External fire exposure of roofs and roof coverings. Extended application of test results from CEN/TS 1187 |
| UNE-EN 60695-6-2:2012 | Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods |
| UNI EN 15269-1 : 2010 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60695-2-12:2011 | Fire hazard testing -- Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials |
| ISO/TR 12470-2:2017 | Fire-resistance tests Guidance on the application and extension of results from tests conducted on fire containment assemblies and products Part 2: Non-loadbearing elements |
| ISO 834-4:2000 | Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements |
| ISO/TR 10295-3:2012 | Fire tests for building elements and components Fire testing of service installations Part 3: Single component penetration seals Guidance on the construction and use of test configurations and simulated services to characterise sealing materials |
| ISO 21927-7:2017 | Smoke and heat control systems — Part 7: Smoke ducts sections |
| UNI EN 15269-2 : 2012 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 2: FIRE RESISTANCE OF HINGED AND PIVOTED STEEL DOORSETS |
| 17/30359220 DC : 0 | BS EN 15269-20 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS |
| ISO 3008-3:2016 | Fire resistance tests Part 3: Door and shutter assemblies horizontally oriented |
| ISO 19353:2015 | Safety of machinery Fire prevention and fire protection |
| UNE-EN 13381-9:2016 | Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
| ISO 29473:2010 | Fire tests — Uncertainty of measurements in fire tests |
| I.S. EN 1366-5:2010 | FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS |
| ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
| EN 15254-5:2018 | Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction |
| ISO 29904:2013 | Fire chemistry — Generation and measurement of aerosols |
| ISO 14934-2:2013 | Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods |
| I.S. EN 15254-5:2009 | EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 5: METAL SANDWICH PANEL CONSTRUCTION |
| ISO 15928-4:2017 | Houses — Description of performance — Part 4: Fire safety |
| I.S. EN 1364-2:2018 | FIRE RESISTANCE FOR TESTS FOR NON-LOADBEARING ELEMENTS - PART 2: CEILINGS |
| I.S. EN 15650:2010 | VENTILATION FOR BUILDINGS - FIRE DAMPERS |
| I.S. EN 60695-1-30:2017 | FIRE HAZARD TESTING - PART 1-30: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - PRESELECTION TESTING PROCESS - GENERAL GUIDELINES |
| BS EN 13823 : 2010 | REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
| EN 1363-1:2012 | Fire resistance tests - Part 1: General Requirements |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 50553 : 2012 AMD 1 2016 | RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
| EN 61034-2:2005/A1:2013 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 2: TEST PROCEDURE AND REQUIREMENTS (IEC 61034-2:2005/A1:2013) |
| EN 61034-1:2005/A1:2014 | MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS - PART 1: TEST APPARATUS (IEC 61034-1:2005/A1:2013) |
| EN 45545-1 : 2013 COR 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
| CEN/TS 45545-1:2009 | Railway applications - Fire protection on railway vehicles - Part 1: General |
| DIN EN ISO 15791-1:2014-05 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| DIN EN 13501-3:2010-02 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers (includes Amendment A1:2009) |
| I.S. EN 1363-1:2012 | FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS |
| BS EN 1366-7:2004 | Fire resistance tests for service installations Conveyor systems and their closures |
| BS EN 14470-1:2004 | Fire safety storage cabinets Safety storage cabinets for flammable liquids |
| BS EN ISO 340:2013 | Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method |
| 13/30277762 DC : 0 | BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| UNI EN ISO 11925-2 : 2010 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
| UNE-EN 60695-1-21:2017 | Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods |
| BS EN 13501-5:2016 | Fire classification of construction products and building elements Classification using data from external fire exposure to roofs tests |
| BS EN 1366-2:2015 | Fire resistance tests for service installations Fire dampers |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| BS EN 60695-6-2:2011 | Fire hazard testing Smoke obscuration. Summary and relevance of test methods |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| BS EN 13238:2010 | Reaction to fire tests for building products. Conditioning procedures and general rules for selection of substrates |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| PD IEC/TR 60695-8-2:2008 | Fire hazard testing Heat release. Summary and relevance of test methods |
| ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
| BS EN ISO 9239-1:2010 | Reaction to fire tests for floorings Determination of the burning behaviour using a radiant heat source |
| 04/30111706 DC : DRAFT MAR 2004 | IEC 60695-9-2 ED.2 - FIRE HAZARD TESTING - PART 9-2: SURFACE SPREAD OF FLAME - SUMMARY AND RELEVANCE OF TEST METHODS |
| DIN EN ISO 340:2013-10 | Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2013) |
| CEN/TS 1187:2012 | Test methods for external fire exposure to roofs |
| EN 1366-3:2009 | Fire resistance tests for service installations - Part 3: Penetration seals |
| EN 60695-7-1:2010 | Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance |
| DIN EN ISO 4589-1:1999-09 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017) |
| CEN/TS 13381-1:2005 | Test methods for determining the contribution to the fire resistance of structural members - Part 1: Horizontal protective membranes |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| CEN/TS 15447:2006 | Mounting and fixing in reaction to fire tests under the Construction Products Directive |
| CEN/TS 45545-2:2009 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| EN 12101-8:2011 | Smoke and heat control systems - Part 8: Smoke control dampers |
| DIN EN 14135:2004-11 | Coverings - Determination of fire protection ability; German version EN 14135:2004 |
| EN 60695-1-40:2014 | Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids |
| EN 45545-4:2013 | Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design |
| IEC 60695-11-2:2017 | Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance |
| DIN EN ISO 11925-2:2011-02 | REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
| EN 50399 : 2011 AMD 1 2016 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
| DIN EN ISO 19353:2016-07 | SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015) |
| EN 60695-6-2:2011 | FIRE HAZARD TESTING - PART 6-2: SMOKE OBSCURATION - SUMMARY AND RELEVANCE OF TEST METHODS (IEC 60695-6-2:2011) |
| CEN/TS 45545-3:2009 | Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
| EN 13381-4:2013 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
| EN 60332-1-1:2004/A1:2015 | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
| EN 13381-9:2015 | Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
| EN 60695-1-20:2016 | Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance |
| EN 60695-8-1:2017 | Fire hazard testing - Part 8-1: Heat release - General guidance |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| EN 60695-10-3:2016 | Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
| EN 60695-9-1:2013 | FIRE HAZARD TESTING - PART 9-1: SURFACE SPREAD OF FLAME - GENERAL GUIDANCE (IEC 60695-9-1:2013) |
| EN 50200:2015 | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
| UNE-EN 13823:2012 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ONORM EN 45545-3 : AUG 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
| ONORM EN 45545-4 : 2015-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
| UNE-EN 13501-3:2007 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
| ISO 6182-7:2004 | Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers |
| ISO 6707-1:2017 | Buildings and civil engineering works Vocabulary Part 1: General terms |
| ISO 871:2006 | Plastics Determination of ignition temperature using a hot-air furnace |
| IEC 60695-4:2012 | Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
| ISO 14934-1:2010 | Fire tests Calibration and use of heat flux meters Part 1: General principles |
| ISO 80000-7:2008 | Quantities and units Part 7: Light |
| ISO 10241-1:2011 | Terminological entries in standards — Part 1: General requirements and examples of presentation |
| ISO 26367-1:2011 | Guidelines for assessing the adverse environmental impact of fire effluents Part 1: General |
| ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.