ISO 13373-2:2016
Current
Current
The latest, up-to-date edition.
Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
01-12-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 13373-2:2016 recommends procedures for processing and presenting vibration data and analyzing vibration signatures for the purpose of monitoring the vibration condition of rotating machinery, and performing diagnostics as appropriate. Different techniques are described for different applications. Signal enhancement techniques and analysis methods used for the investigation of particular machine dynamic phenomena are included. Many of these techniques can be applied to other machine types, including reciprocating machines. Example formats for the parameters that are commonly plotted for evaluation and diagnostic purposes are also given.
ISO 13373-2:2016 is divided essentially into two basic approaches when analysing vibration signals: the time domain and the frequency domain. Some approaches to the refinement of diagnostic results, by changing the operational conditions, are also covered.
ISO 13373-2:2016 includes only the most commonly used techniques for the vibration condition monitoring, analysis and diagnostics of machines. There are many other techniques used to determine the behaviour of machines that apply to more indepth vibration analysis and diagnostic investigations beyond the normal followon to machinery condition monitoring. A detailed description of these techniques is beyond the scope of ISO 13373-2:2016, but some of these more advanced special purpose techniques are listed in Clause 5 for additional information.
For specific machine types and sizes, the ISO 7919 and ISO 10816 series provide guidance for the application of broadband vibration magnitudes for condition monitoring, and other documents such as VDI 3839 provide additional information about machineryspecific problems that can be detected when conducting vibration diagnostics.
| DevelopmentNote |
Supersedes ISO/DIS 13373-2. (01/2016)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 13373-2:2021 | Identical |
| UNI ISO 13373-2:2016 | Identical |
| BS ISO 13373-2:2016 | Identical |
| DIN ISO 13373-2:2006-01 | Identical |
| NF ISO 13373-2 : 2016 | Identical |
| NEN ISO 13373-2 : 2016 | Identical |
| GOST R ISO 13373-2 : 2009 | Identical |
| DIN ISO 13373-2:2016-11 | Identical |
| BIS IS/ISO 13373-2 : 2005(R2016) | Identical |
| 15/30297073 DC : 0 | BS ISO 13373-9 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 9: DIAGNOSTIC TECHNIQUES FOR ELECTRIC MOTORS |
| DIN ISO 10816-7:2009-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 7: ROTODYNAMIC PUMPS FOR INDUSTRIAL APPLICATIONS, INCLUDING MEASUREMENTS ON ROTATING SHAFTS |
| ISO/TR 17243-2:2017 | Machine tool spindles Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| UNI ISO 10816-4 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| PD ISO/TR 17243-1:2014 | Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing Spindles with rolling element bearings and integral drives operating at speeds between 600 min<sup>-1</sup> and 30 000 min<sup>-1</sup> |
| ISO/TR 230-8:2010 | Test code for machine tools Part 8: Vibrations |
| BS ISO 7919-3 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES |
| PD ISO/TR 17243-2:2017 | Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| 09/30192810 DC : DRAFT JAN 2009 | BS ISO 10816-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| IEC TS 60034-32:2016 | Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings |
| BS ISO 10816-4 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| 16/30341593 DC : 0 | BS ISO 10816-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| BS ISO 10816-7:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| 09/30190941 DC : DRAFT JAN 2009 | BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| BS ISO 13373-9:2017 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for electric motors |
| DIN ISO 13373-3:2015-12 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 13373-3:2015) |
| BS ISO 10816-8:2014 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Reciprocating compressor systems |
| 08/30184178 DC : DRAFT JUNE 2008 | BS EN 61400-25-6 - WIND TURBINES - PART 25-6: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - LOGICAL NODE CLASSES AND DATA CLASSES FOR CONDITION MONITORING |
| 14/30297061 DC : 0 | BS ISO 13373-3 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS |
| 12/30264446 DC : 0 | BS ISO 10816-8 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS |
| BS ISO 10816-3 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| VDI 3839 Blatt 6:2007-10 | Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with machine sets in hydraulic power stations |
| VDI 3836:2012-02 | Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers - Addition to DIN ISO 10816-3 |
| VDI 4550 Blatt 1:2017-04 | Vibration analysis - Procedures and presentation of results - Terminology and basic principles |
| UNE-ISO/TR 230-8:2012 | Test code for machine tools -- Part 8: Vibrations |
| BS ISO 13373-7:2017 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants |
| 16/30341590 DC : 0 | BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| DIN ISO 10816-21:2015-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015) |
| BS ISO 7919-2:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 10816-21:2015 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Horizontal axis wind turbines with gearbox |
| 09/30192807 DC : DRAFT FEB 2009 | BS ISO 7919-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| PD ISO/TR 19201:2013 | Mechanical vibration. Methodology for selecting appropriate machinery vibration standards |
| 14/30265061 DC : 0 | BS ISO 10816-21 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX |
| ISO 10816-7:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| ISO 13373-9:2017 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors |
| ISO 7919-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
| ISO 13373-3:2015 | Condition monitoring and diagnostics of machines Vibration condition monitoring Part 3: Guidelines for vibration diagnosis |
| PD ISO/TR 230-8:2010 | Test code for machine tools Vibrations |
| DIN ISO 7919-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| UNI ISO 7919-4 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| 03/306196 DC : DRAFT APR 2003 | ISO 19860 - GAS TURBINES - DATA ACQUISITION AND TREND MONITORING SYSTEM REQUIREMENTS FOR GAS TURBINE INSTALLATIONS |
| BS ISO 13373-3:2015 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Guidelines for vibration diagnosis |
| 16/30341596 DC : 0 | BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| UNI ISO 10816-2 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| 09/30190938 DC : DRAFT JAN 2009 | BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| ISO 19860:2005 | Gas turbines — Data acquisition and trend monitoring system requirements for gas turbine installations |
| ISO 10816-8:2014 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 8: Reciprocating compressor systems |
| ISO/TR 17243-1:2014 | Machine tool spindles Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1 |
| ISO 10816-21:2015 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 21: Horizontal axis wind turbines with gearbox |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| 16/30334059 DC : 0 | BS ISO 13373-7 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 7: DIAGNOSTIC TECHNIQUES FOR MACHINE SETS IN HYDRAULIC POWER GENERATING AND PUMP-STORAGE PLANTS |
| 16/30341587 DC : 0 | BS ISO 7919-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES |
| DIN ISO 10816-8:2014-11 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 8: RECIPROCATING COMPRESSOR SYSTEMS (ISO 10816-8:2014) |
| BS ISO 10816-2:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| ISO 13373-7:2017 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants |
| PD IEC/TS 60034-32:2016 | Rotating electrical machines Measurement of stator end-winding vibration at form-wound windings |
| BS ISO 7919-4 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| API 691 : 2017 | RISK-BASED MACHINERY MANAGEMENT |
| ISO/TR 19201:2013 | Mechanical vibration — Methodology for selecting appropriate machinery vibration standards |
| UNI ISO 7919-2 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| IEC TS 62600-2:2016 | Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems |
| DIN ISO 10816-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ISO 16063-21:2003 | Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer |
| VDI 3839 Blatt 1:2001-03 | Instructions on measuring and interpreting the vibrations of machines - General principles |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| ISO 1683:2015 | Acoustics Preferred reference values for acoustical and vibratory levels |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 10817-1:1998 | Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.