ISO 11963:2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Plastics Polycarbonate sheets Types, dimensions and characteristics
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-18-2019
English, French
11-08-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11963:2012 specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p-isopropylidenediphenyl carbonate). The sheets may be coloured or colourless, and they may be transparent, translucent or opaque. The sheets may also have a special weather-protective layer on one or both surfaces.
ISO 11963:2012 applies only to thicknesses equal to or greater than 1,5 mm.
| DevelopmentNote |
DRAFT ISO/DIS 11963 is also available for this standard. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 11963 : 2013 | Identical |
| NBN EN ISO 11963 : 2013 | Identical |
| NEN EN ISO 11963 : 2012 | Identical |
| NS EN ISO 11963 : 2012 | Identical |
| I.S. EN ISO 11963:2012 | Identical |
| PN EN ISO 11963 : 2013 | Identical |
| SN EN ISO 11963 : 2013 | Identical |
| EN ISO 11963:2012 | Identical |
| BS EN ISO 11963:2012 | Identical |
| UNE-EN ISO 11963:2013 | Identical |
| NF EN ISO 11963 : 2013 | Identical |
| ONORM EN ISO 11963 : 2013 | Identical |
| DIN EN ISO 11963:2013-03 | Identical |
| UNI EN 15860 : 2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| 16/30317348 DC : 0 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| PREN 15860 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| BS EN 15860:2010 | Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods |
| UNE-EN 15860:2011 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| 18/30334473 DC : 0 | BS ISO 11336-3 - LARGE YACHTS - STRENGTH, WEATHERTIGHTNESS AND WATERTIGHTNESS OF GLAZED OPENINGS - PART 3: QUALITY ASSURANCE, INSTALLATION AND IN-SERVICE INSPECTION |
| DIN EN 15860:2016-07 (Draft) | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| EN 15860:2010 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| I.S. EN 15860:2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| ISO 75-1:2013 | Plastics Determination of temperature of deflection under load Part 1: General test method |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 11359-2:1999 | Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature |
| ISO 75-2:2013 | Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite |
| ISO 1482:2011 | Slotted countersunk (flat) head tapping screws |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 877-1:2009 | Plastics — Methods of exposure to solar radiation — Part 1: General guidance |
| ISO 489:1999 | Plastics Determination of refractive index |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| ISO 877-3:2009 | Plastics Methods of exposure to solar radiation Part 3: Intensified weathering using concentrated solar radiation |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 62:2008 | Plastics Determination of water absorption |
| ISO 7391-1:2006 | Plastics Polycarbonate (PC) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 877-2:2009 | Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.