ISO 11898-2:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Road vehicles — Controller area network (CAN) — Part 2: High-speed medium access unit
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
03-22-2024
Superseded by
Language(s)
English
Published date
12-14-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11898-2:2016 specifies the high-speed physical media attachment (HS-PMA) of the controller area network (CAN), a serial communication protocol that supports distributed real-time control and multiplexing for use within road vehicles. This includes HS-PMAs without and with low-power mode capability as well as with selective wake-up functionality. The physical media dependant sublayer is not in the scope of this document.
| Committee |
ISO/TC 22/SC 31
|
| DevelopmentNote |
Together with ISO 11898-1, supersedes ISO 11898 (12/2003) Supersedes ISO/DIS 11898-2. (12/2016)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| NEN ISO 11898-2 : 2016 | Identical |
| BS ISO 11898-2 : 2016 | Identical |
| DS ISO 11898-2 : 2016 | Identical |
| BS ISO 11898-2:2016 | Identical |
| GOST R ISO 11898-2 : 2015 | Identical |
| UNE-EN 1501-5:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| 13/30277213 DC : 0 | BS ISO 17987-4 - ROAD VEHICLES - LOCAL INTERCONNECT NETWORK (LIN) - PART 4: ELECTRICAL PHYSICAL LAYER (EPL) SPECIFICATION 12 V/24 V |
| BS ISO 15765-1:2011 | Road vehicles. Diagnostic communication over controller area network (DoCAN) General information and use case definition |
| BS ISO 15031-7:2013 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics Data link security |
| BS ISO 14230-1:2012 | Road vehicles. Diagnostic communication over K-Line (DoK-Line) Physical layer |
| DIN 14700-1:2016-08 | FIREFIGHTING AND FIRE PROTECTION - CAN INTERFACE FOR COMPONENTS IN EMERGENCY VEHICLES - PART 1: GENERAL REQUIREMENTS |
| BS ISO 15031-1:2010 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics General information and use case definition |
| 12/30264901 DC : 0 | BS EN 61158-1 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
| SAE J 2284-2 : 2016 | HIGH SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 250 KBPS |
| 15/30319117 DC : 0 | BS ISO 15765-4 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER CONTROLLER AREA NETWORK (DOCAN) - PART 4: REQUIREMENTS FOR EMISSIONS-RELATED SYSTEMS |
| 12/30248980 DC : 0 | BS ISO 15638-3 - INTELLIGENT TRANSPORT SYSTEMS - FRAMEWORK FOR COOPERATIVE TELEMATICS APPLICATIONS FOR REGULATED COMMERCIAL FREIGHT VEHICLES (TARV) - PART 3: REQUIREMENTS, 'CERTIFICATION AUTHORITY' APPROVAL PROCEDURES, AND ENFORCEMENT PROVISIONS FOR THE PROVIDERS OF REGULATED SERVICES |
| BS ISO 14229-2:2013 | Road vehicles. Unified diagnostic services (UDS) Session layer services |
| S.R. CLC/TR 61158-1:2010 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
| SAE J 2284-4 : 2016 | HIGH-SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 500 KBPS WITH CAN FD DATA AT 2 MBPS |
| 09/30198404 DC : DRAFT JAN 2009 | BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELD BUS PROFILES |
| DIN EN 61784-1:2015-02 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES (IEC 61784-1:2014) |
| BS EN 61162-3 : 2008 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 3: SERIAL DATA INSTRUMENT NETWORK |
| BS ISO 14229-3:2012 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on CAN implementation (UDSonCAN) |
| 09/30190385 DC : 0 | BS ISO 15765-4 - ROAD VEHICLES - DIAGNOSTICS ON CONTROLLER AREA NETWORKS (CAN) - PART 4: REQUIREMENTS FOR EMISSIONS-RELATED SYSTEMS |
| BS EN 16603-50-15:2017 | Space engineering. CANbus extention protocol |
| 12/30227358 DC : 0 | BS ISO 14229-6 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 6: UDS ON K-LINE IMPLEMENTATION (UDSONK-LINE) |
| BS ISO 15638-3:2013 | Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) Operating requirements, \'Approval Authority\' procedures, and enforcement provisions for the providers of regulated services |
| BS ISO 11783-4:2011 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Network layer |
| BS ISO 14229-7:2015 | Road vehicles. Unified diagnostic services (UDS) UDS on local interconnect network (UDSonLIN) |
| PD CLC/TR 61158-1:2010 | Industrial communication networks. Fieldbus specifications Overview and guidance for the IEC 61158 and IEC 61784 series |
| SAE J 3005 : 2014 | PERMANENTLY OR SEMI-PERMANENTLY INSTALLED DIAGNOSTIC COMMUNICATION DEVICES |
| ISO 14230-2:2016 | Road vehicles Diagnostic communication over K-Line (DoK-Line) Part 2: Data link layer |
| ISO 15031-1:2010 | Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 1: General information and use case definition |
| I.S. EN 61784-5-2:2013 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-2: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 2 |
| I.S. EN 61375-3-3:2012 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-3: CANOPEN CONSIST NETWORK (CCN) (IEC 61375-3-3:2012 (EQV)) |
| ISO 15031-5:2015 | Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related diagnostic services |
| BS EN 62026-3:2015 | Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs) DeviceNet |
| IEC 62026-3:2014 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| SAE J2284/2:2016(S2023) | High-Speed CAN (HSC) for Vehicle Applications at 250 kbps(STABILIZED May 2023) |
| SAE J2284/1:2016(S2023) | High-Speed CAN (HSC) for Vehicle Applications at 125 kbps |
| DEFSTAN 66-031(PT8)/2(2016) : 2016 | REQUIREMENTS FOR ELECTRONIC AND ELECTRICAL TEST AND MEASUREMENT EQUIPMENT - PART 8: REQUIREMENTS FOR AUTOMATIC TEST SYSTEMS UTILISING AN OPEN SYSTEM ARCHITECTURE |
| MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
| BS ISO 14229-5:2013 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on Internet Protocol implementation (UDSonIP) |
| BS ISO 27145-1:2012 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements General information and use case definition |
| BS ISO 22901-1:2008 | Road vehicles. Open diagnostic data exchange (ODX) Data model specification |
| BS ISO 11898-6:2013 | Road vehicles. Controller area network (CAN) High-speed medium access unit with selective wake-up functionality |
| BS EN 61375-3-3:2012 | Electronic railway equipment. Train communication network (TCN) CANopen Consist Network (CCN) |
| BS ISO 11783-2:2012 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Physical layer |
| 15/30321478 DC : 0 | BS ISO 27145-4 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 4: CONNECTION BETWEEN VEHICLE AND TEST EQUIPMENT |
| BS EN 61851-24:2014 | Electric vehicle conductive charging system Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging |
| BS ISO 11898-5:2007 | Road vehicles. Controller area network (CAN) High-speed medium access unit with low-power mode |
| BS ISO 14229-4:2012 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on FlexRay implementation (UDSonFR) |
| 10/30203563 DC : 0 | BS ISO 11783-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 2: PHYSICAL LAYER |
| SAE J 2284-5 : 2016 | HIGH-SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 500 KBPS WITH CAN FD DATA AT 5 MBPS |
| 15/30329552 DC : 0 | BS EN 50463-4 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
| CEI EN 50463-4 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
| ISO 14229-6:2013 | Road vehicles — Unified diagnostic services (UDS) — Part 6: Unified diagnostic services on K-Line implementation (UDSonK-Line) |
| ARINC 812 : 2006 SUPP 1 | DEFINITION OF STANDARD DATA INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT, CAN COMMUNICATIONS |
| ISO 14229-5:2013 | Road vehicles Unified diagnostic services (UDS) Part 5: Unified diagnostic services on Internet Protocol implementation (UDSonIP) |
| NF EN 61375-3-3 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-3: CANOPEN CONSIST NETWORK |
| BS ISO 11783-5:2011 | Tractors and machinery for agriculture and forestry. Serial control and communications data network Network management |
| ISO 14229-2:2013 | Road vehicles Unified diagnostic services (UDS) Part 2: Session layer services |
| ISO 11898-4:2004 | Road vehicles — Controller area network (CAN) — Part 4: Time-triggered communication |
| EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| SAE J2284/4:2022 | High-Speed CAN (HSC) for Vehicle Applications at 500 kbps with CAN FD Data at 2 Mbps |
| SAE J2284/5:2022 | High-Speed CAN (HSC) for Vehicle Applications at 500 kbps with CAN FD Data at 5 Mbps |
| VDI 4464:2012-05 | Operation of industrial trucks with RFID components |
| VDI 4458:2016-04 | Fleet management systems for industrial trucks |
| 10/30214832 DC : DRAFT SEP 2010 | BS ISO 27145-4 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 4: CONNECTION BETWEEN VEHICLE AND TEST EQUIPMENT |
| ISO 14229-7:2015 | Road vehicles Unified diagnostic services (UDS) Part 7: UDS on local interconnect network (UDSonLIN) |
| BS EN 50463-4:2017 | Railway applications. Energy measurement on board trains Communication |
| 16/30340717 DC : 0 | BS EN 16603-50-15 - SPACE ENGINEERING - CANBUS EXTENTION PROTOCOL |
| 11/30213792 DC : 0 | BS EN 50463-4 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
| ISO 13209-1:2011 | Road vehicles — Open Test sequence eXchange format (OTX) — Part 1: General information and use cases |
| 14/30283523 DC : 0 | BS ISO 14229-7 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 7: UNIFIED DIAGNOSTIC SERVICES ON LOCAL INTERCONNECT NETWORK IMPLEMENTATION (UDSONLIN) |
| 14/30301555 DC : 0 | BS ISO 15031-5 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 5: EMISSIONS-RELATED DIAGNOSTIC SERVICES |
| BS ISO 27145-2:2012 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Common data dictionary |
| 09/30205462 DC : 0 | BS EN 61375-3-3 - ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK - PART 3-3: CCN - CANOPEN CONSIST NETWORK BUS |
| BS ISO 13209-1:2011 | Road vehicles. Open test sequence exchange format (OTX) General information and use cases |
| 12/30242613 DC : 0 | BS ISO 11783-1 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 1: GENERAL STANDARD FOR MOBILE DATA COMMUNICATION |
| BS ISO 11783-13:2011 | Tractors and machinery for agriculture and forestry. Serial control and communications data network File server |
| ISO 11783-13:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 13: File server |
| SAE J 1939/14 : 2016 | PHYSICAL LAYER, 500 KBPS |
| ISO 15765-1:2011 | Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 1: General information and use case definition |
| BS EN 61784-5-2:2013 | Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 2 |
| S.R. CEN/TR 16815:2015 | CLEANOPEN - APPLICATION PROFILE FOR MUNICIPAL VEHICLES |
| CLC/TR 61158-1:2010 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
| ISO 14230-1:2012 | Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer |
| BS EN 61784-1:2014 | Industrial communication networks. Profiles Fieldbus profiles |
| I.S. EN 1501-5:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| BS ISO 14230-2:2016 | Road vehicles. Diagnostic communication over K-Line (DoKLine) Data link layer |
| SAE J 3138 : JUN 2018 | DIAGNOSTIC LINK CONNECTOR SECURITY |
| ISO 16845-2:2014 | Road vehicles Controller area network (CAN) conformance test plan Part 2: High-speed medium access unit with selective wake-up functionality |
| ISO 11783-4:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 4: Network layer |
| ISO 15031-7:2013 | Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security |
| ISO 15638-3:2013 | Intelligent transport systems — Framework for collaborative telematics applications for regulated commercial freight vehicles (TARV) — Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services |
| ISO 27145-1:2012 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 1: General information and use case definition |
| ISO 11898-5:2007 | Road vehicles Controller area network (CAN) Part 5: High-speed medium access unit with low-power mode |
| I.S. EN 62026-3:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 3: DEVICENET |
| ISO 15765-3:2004 | Road vehicles Diagnostics on Controller Area Networks (CAN) Part 3: Implementation of unified diagnostic services (UDS on CAN) |
| IEC TR 61158-1:2010 | Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series |
| IEEE 2030.1.1-2015 | IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles |
| UNE-EN 50463-4:2013 | Railway applications - Energy measurement on board trains - Part 4: Communication |
| BS ISO 15765-2:2016 | Road vehicles. Diagnostic communication over Controller Area Network (DoCAN) Transport protocol and network layer services |
| BS ISO 15765-4:2016 | Road vehicles. Diagnostic communication over Controller Area Network (DoCAN) Requirements for emissions-related systems |
| ISO/PAS 27145-4:2006 | Road vehicles Implementation of WWH-OBD communication requirements Part 4: Connection between vehicle and test equipment |
| 12/30261045 DC : 0 | BS ISO 11898-6 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 6: HIGH-SPEED MEDIUM ACCESS UNIT WITH SELECTIVE WAKE-UP FUNCTIONALITY |
| UNI EN 1501-5 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| 12/30264885 DC : 0 | BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES |
| DIN EN 1501-5:2012-02 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| BS EN 1501-5:2011 | Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
| ISO 16845:2004 | Road vehicles Controller area network (CAN) Conformance test plan |
| 09/30196910 DC : DRAFT DEC 2009 | BS ISO 11783-4 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 4: NETWORK LAYER |
| BS ISO 27145-4:2016 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Connection between vehicle and test equipment |
| ISO 27145-2:2012 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 2: Common data dictionary |
| BS ISO 15031-5:2015 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics Emissions-related diagnostic services |
| I.S. EN 16603-50-15:2017 | SPACE ENGINEERING - CANBUS EXTENTION PROTOCOL |
| DD ISO/PAS 27145-4:2006 | Road vehicles. Implementation of WWH-OBD communication requirements Connection between vehicle and test equipment |
| 12/30227355 DC : 0 | BS ISO 14229-5 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 5: UNIFIED DIAGNOSTIC SERVICES ON INTERNET PROTOCOL IMPLEMENTATION (UDSONIP) |
| CEI EN 61375-3-3 : 2013 | ELECTRONIC RAILWAY EQUIPMENT - TRAIN COMMUNICATION NETWORK (TCN) - PART 3-3: CANOPEN CONSIST NETWORK (CCN) |
| NF ISO 16845 : 2004 | ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - CONFORMANCE TEST PLAN |
| SAE J 1939/11 : 2016 | PHYSICAL LAYER, 250 KBPS, TWISTED SHIELDED PAIR |
| ISO 11783-5:2011 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 5: Network management |
| ISO 27145-4:2016 | Road vehicles Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Part 4: Connection between vehicle and test equipment |
| I.S. EN 61158-1:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 1: OVERVIEW AND GUIDANCE FOR THE IEC 61158 AND IEC 61784 SERIES |
| SAE J 2847/6 : 2015 | COMMUNICATION BETWEEN WIRELESS CHARGED VEHICLES AND WIRELESS EV CHARGERS |
| BS ISO 16845-2:2014 | Road vehicles. Controller area network (CAN) conformance test plan High-speed medium access unit with selective wake-up functionality |
| ISO 11783-1:2017 | Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 1: General standard for mobile data communication |
| ARINC 825 : 2015 | GENERAL STANDARDIZATION OF CAN (CONTROLLER AREA NETWORK) BUS PROTOCOL FOR AIRBORNE USE |
| ISO 14229-4:2012 | Road vehicles — Unified diagnostic services (UDS) — Part 4: Unified diagnostic services on FlexRay implementation (UDSonFR) |
| EN 16603-50-15:2017 | Space engineering - CANbus extention protocol |
| I.S. EN 61784-1:2014 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES |
| ISO 15765-4:2016 | Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systems |
| ISO 11783-2:2012 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 2: Physical layer |
| ISO 15765-2:2016 | Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services |
| IEEE 1823-2015 | IEEE Standard for Universal Power Adapter for Mobile Devices |
| IEC 61784-5-2:2013 | Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 |
| UNE-EN 61851-24:2015 | Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging |
| 12/30261041 DC : 0 | BS EN 62026-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - CONTROLLER-DEVICE INTERFACES (CDIS) - PART 3: DEVICENET |
| 06/30134700 DC : DRAFT JAN 2006 | ISO 11898-5 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - PART 5: HIGH-SPEED MEDIUM ACCESS UNIT WITH LOW-POWER MODE |
| BS ISO 14229-6:2013 | Road vehicles. Unified diagnostic services (UDS) Unified diagnostic services on K-Line implementation (UDSonK-Line) |
| BS ISO 27145-3:2012 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements Common message dictionary |
| SAE J 2284-1 : 2016 | HIGH SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 125 KBPS |
| 13/30270894 DC : 0 | BS ISO 16845-2 - ROAD VEHICLES - CONTROLLER AREA NETWORK (CAN) - CONFORMANCE TEST PLAN - PART 2: HIGH-SPEED MEDIUM ACCESS UNIT WITH SELECTIVE WAKE-UP FUNCTIONALITY - CONFORMANCE TEST PLAN |
| BS EN 61158-1:2014 | Industrial communication networks. Fieldbus specifications Overview and guidance for the IEC 61158 and IEC 61784 series |
| 09/30196913 DC : 0 | BS ISO 11783-5 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SERIAL CONTROL AND COMMUNICATIONS DATA NETWORK - PART 5: NETWORK MANAGEMENT |
| ISO 17987-4:2016 | Road vehicles Local Interconnect Network (LIN) Part 4: Electrical physical layer (EPL) specification 12 V/24 V |
| CEN/TR 16815:2015 | CleANopen - Application profile for municipal vehicles |
| 11/30219760 DC : 0 | BS ISO 14229-3 - ROAD VEHICLES - UNIFIED DIAGNOSTIC SERVICES (UDS) - PART 3: UNIFIED DIAGNOSTICS SERVICES ON CAN IMPLEMENTATION (UDSONCAN) |
| PREN 50463-4 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
| 15/30329980 DC : 0 | BS ISO 14230-2 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER K-LINE (DOK-LINE) - PART 2: DATA LINK LAYER |
| UNE-ISO 14230-1:2015 | Road vehicles. Diagnostic communication over K-Line (DoK-Line). Part 1: Physical layer. |
| EN 50463-4:2017 | Railway applications - Energy measurement on board trains - Part 4: Communication |
| I.S. EN 61162-3:2008 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 3: SERIAL DATA INSTRUMENT NETWORK |
| ISO 27145-3:2012 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 3: Common message dictionary |
| SAE J 2284-3 : 2016 | HIGH-SPEED CAN (HSC) FOR VEHICLE APPLICATIONS AT 500 KBPS |
| IEC 62888-4:2018 | Railway applications - Energy measurement on board trains - Part 4: Communication |
| I.S. EN 61851-24:2014 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 24: DIGITAL COMMUNICATION BETWEEN A D.C. EV CHARGING STATION AND AN ELECTRIC VEHICLE FOR CONTROL OF D.C. CHARGING |
| ARINC 812A-2 : 2014 | STANDARD DATA INTERFACES FOR GALLEY INSERT (GAIN) EQUIPMENT - PART 2: CAN COMMUNICATIONS VERIFICATION AND SYSTEM TEST GUIDANCE |
| SAE J 2012 : 2016 | DIAGNOSTIC TROUBLE CODE DEFINITIONS |
| PD CEN/TR 16815:2015 | CleANopen. Application profile for municipal vehicles |
| SAE J 1939 01 : 2012 | ON-HIGHWAY EQUIPMENT CONTROL AND COUMMUNICATION NETWORK |
| ISO 22901-1:2008 | Road vehicles — Open diagnostic data exchange (ODX) — Part 1: Data model specification |
| ARINC 826 : 2013 | SOFTWARE DATA LOADER USING CAN INTERFACE |
| CEI EN 61784-5-2 : 2014 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-2: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 2 |
| I.S. EN 50463-4:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
| EN 61162-3:2008/A2:2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 3: SERIAL DATA INSTRUMENT NETWORK (IEC 61162-3:2008/A2:2014) |
| IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
| IEC 61162-3:2008+AMD1:2010+AMD2:2014 CSV | Maritime navigation and radiocommunication equipment and systems -Digital interfaces - Part 3: Serial data instrument network |
| IEC 61375-3-3:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN) |
| EN 61784-5-2:2013 | Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 |
| EN 61158-1:2014 | Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series |
| EN 61851-24:2014/AC:2015 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 24: DIGITAL COMMUNICATION BETWEEN A D.C. EV CHARGING STATION AND AN ELECTRIC VEHICLE FOR CONTROL OF D.C. CHARGING (IEC 61851-24:2014) |
| EN 61375-3-3:2012 | Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN) |
| IS 17017 : Part 31 : 2024 | Electric Vehicle Conductive Charging System - Part 31 a.c. or d.c. Ev Supply Equipment for Where Protection Relies on Electrical Separation |
| ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| ISO 11898-4:2004 | Road vehicles — Controller area network (CAN) — Part 4: Time-triggered communication |
| ISO 11898-3:2006 | Road vehicles Controller area network (CAN) Part 3: Low-speed, fault-tolerant, medium-dependent interface |
| ISO 16845-2:2014 | Road vehicles Controller area network (CAN) conformance test plan Part 2: High-speed medium access unit with selective wake-up functionality |
| ISO 11898-5:2007 | Road vehicles Controller area network (CAN) Part 5: High-speed medium access unit with low-power mode |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.