ISO 11737-2:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
12-02-2019
Superseded by
Language(s)
English, French
Published date
11-06-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11737-2:2009 specifies the general criteria for tests of sterility on medical devices that have been exposed to a treatment with the sterilizing agent reduced relative to that anticipated to be used in routine sterilization processing. These tests are intended to be performed when defining, validating or maintaining a sterilization process.
| DevelopmentNote |
DRAFT ISO/DIS 11737-2 is also available for this standard. (04/2018)
|
| DocumentType |
Standard
|
| Pages |
16
|
| ProductNote |
THIS STANDARD ALSO REFERES TO: ISO 90003
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| JIS T 11737-2:2013 | Identical |
| ONORM EN ISO 11737-2 : 2010 | Identical |
| NEN EN ISO 11737-2 : 2009 | Identical |
| I.S. EN ISO 11737-2:2009 | Identical |
| GOST ISO 11737-2 : 2011 | Identical |
| PN EN ISO 11737-2 : DEC 2010 | Identical |
| NF EN ISO 11737-2 : 2010 | Identical |
| EN ISO 11737-2:2009 | Identical |
| SN EN ISO 11737-2 : 2010 | Identical |
| DIN EN ISO 11737-2:2010-04 | Identical |
| BS EN ISO 11737-2:2009 | Identical |
| NBN EN ISO 11737-2 : 2010 | Identical |
| UNE-EN ISO 11737-2:2010 | Identical |
| NS EN ISO 11737-2 : 2009 | Identical |
| UNI EN ISO 11737-2 : 2010 | Identical |
| AAMI ISO 11737-2 :2009 | Identical |
| AAMI ISO 11737-2 : 2009 : R2014 | Identical |
| GOST R ISO 11737-2 : 2003 | Identical |
| 99/562423 DC : DRAFT APR 99 | BS:ENISO 14937 - STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL CRITERIA FOR CHARACTERIZATION OF A STERILIZING AGENT AND DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 17/30363625 DC : DRAFT SEP 2017 | BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS EN ISO 13504:2012 | Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 08/30149503 DC : DRAFT JAN 2008 | BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| ISO/TS 15843:2000 | Sterilization of health care products Radiation sterilization Product families and sampling plans for verification dose experiments and sterilization dose audits, and frequency of sterilization dose audits |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| I.S. EN ISO 11737-1:2018&LC:2018 | STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS (ISO 11737-1:2018) |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 16/30302485 DC : 0 | BS EN ISO 11737-1 - STERILIZATION OF HEALTH CARE PRODUCTS - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCT |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| DIN EN ISO 13408-7:2015-11 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS (ISO 13408-7:2012) |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| CSA Z1416: 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| S.R. CEN ISO/TS 13004:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] (ISO/TS 13004:2013) |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 14160:2011(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI/ISO TIR17665-3:2014(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| PREN ISO 11137-2 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI CEN ISO/TS 13004 : 2014 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14534:2015 | Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements |
| BS EN ISO 14160:2011 | Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ONORM ONR CEN ISO/TS 13004 : 2014 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] (ISO/TS 13004:2013) |
| ANSI/AAMI/ ISO 11137-2:2013(R2019) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| UNE-EN ISO 13504:2013 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| BS EN ISO 13408-7:2015 | Aseptic processing of health care products Alternative processes for medical devices and combination products |
| PD ISO/TS 17665-3:2013 | Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| 11/30244091 DC : 0 | BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 11/30212235 DC : 0 | BS EN ISO 13504 - DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| CSA Z14161 : 2011 : R2015 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| 04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS PD ISO/TS 13004 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| CSA Z11137-2 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| 04/30048584 DC : DRAFT MAY 2004 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 16061:2015-09 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| UNI CEN ISO/TS 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| ASTM F 2347 : 2015 : REDLINE | Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications |
| AAMI ISO 11137-2 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z17665-2:09 (R2019) | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT) |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN 556-2:2015-11 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| BS EN 556-2:2015 | Sterilization of medical devices. Requirements for medical devices to be designated \'STERILE\' Requirements for aseptically processed medical devices |
| ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| I.S. EN ISO 14534:2015 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011) |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 11137-2:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE (ISO 11137-2:2013) |
| I.S. EN ISO 14160:2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 11137-2:2015-11 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| 04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| 13/30285624 DC : 0 | BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| 09/30207531 DC : 0 | BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11137-2 : 2007 : R2012 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
| I.S. EN ISO 13408-7:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS (ISO 13408-7:2012) |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO TIR13004:2013(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF A SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| ISO 11737-1:2018 | Sterilization of health care products — Microbiological methods — Part 1: Determination of a population of microorganisms on products |
| I.S. EN ISO 13504:2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| ONORM EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
| UNE-EN ISO 14160:2012 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| UNI EN ISO 15883-1 : 2014 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 13504:2012-10 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| PREN ISO 14160 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| I.S. EN 556-2:2015 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| AAMI ISO TIR 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| CSA Z17665-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| UNI EN ISO 13504 : 2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| 09/30157765 DC : 0 | BS EN ISO 14160 REV - STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 04/30081258 DC : DRAFT MARCH 2004 | BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS |
| 12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| 07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 12/30244415 DC : DRAFT APR 2012 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| PD CEN ISO/TS 13004:2014 | Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VD<sub>max</sub>SD |
| BS EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants. General requirements |
| 09/30197784 DC : 0 | BS EN ISO 11137-2 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| CSA ISO 11137-2 : 2016 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
| AAMI ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI/ISO TIR17665-2:2009(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| ANSI/AAMI/ISO 13408-7:2012(R2018) | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS |
| UNI EN ISO 11737-1 : 2006 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| ISO/TS 13409:2002 | Sterilization of health care products Radiation sterilization Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches |
| I.S. EN ISO 16061:2015 | INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015) |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 13504:2012 | Dentistry — General requirements for instruments and related accessories used in dental implant placement and treatment |
| UNE-EN 556-2:2016 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| ISO/TS 13004:2013 | Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD |
| ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants General requirements |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 14534:2011 | Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements |
| UNE-EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| ISO 13408-7:2012 | Aseptic processing of health care products — Part 7: Alternative processes for medical devices and combination products |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| EN ISO 13408-7:2015 | Aseptic processing of health care products - Part 7: Alternative processes for medical devices and combination products (ISO 13408-7:2012) |
| EN ISO 13504:2012 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| BS ISO 13408-7 : 2012 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 7: ALTERNATIVE PROCESSES FOR MEDICAL DEVICES AND COMBINATION PRODUCTS |
| PREN ISO 11135 : DRAFT 2011 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO/DIS 11135:2011) |
| ISO/TR 15844:1998 | Sterilization of health care products Radiation sterilization Selection of sterilization dose for a single production batch |
| ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
| DD CEN ISO/TS 17665-2:2009 | Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1 |
| 04/30048301 DC : DRAFT MAY 2004 | BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| S.R. CEN ISO TS 17665-2:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11137-2 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 2: ESTABLISHING THE STERILIZATION DOSE |
| AAMI ISO TIR 17665-3:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| UNE-EN ISO 15883-7:2016 | Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016) |
| DIN EN ISO 11737-1:2009-09 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1: DETERMINATION OF A POPULATION OF MICROORGANISMS ON PRODUCTS |
| AAMI ISO TIR 13004 :2013 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - SUBSTANTIATION OF A SELECTED STERILIZATION DOSE: METHOD VD[MAX][SD] |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| AAMI ISO 11737-1 : 2006 : R2011 | STERILIZATION OF MEDICAL DEVICES - MEDICAL DEVICES - PART 1: DETERMINATION OF THE POPULATION OF MICROORGANISMS ON PRODUCT |
| ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| ONORM EN ISO 11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| UNE-EN ISO 11137-2:2015 | Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 11137-2:2015 | Sterilization of health care products. Radiation Establishing the sterilization dose |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
| EN ISO 16061:2015 | Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015) |
| CEN ISO/TS 13004:2014 | Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013) |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| CEN ISO/TS 17665-2:2009 | Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 11138-2:2017 | Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
| ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
| ISO 14644-7:2004 | Cleanrooms and associated controlled environments — Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 14644-4:2001 | Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up |
| ISO/TS 11135-2:2008 | Sterilization of health care products Ethylene oxide Part 2: Guidance on the application of ISO 11135-1 |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.