ISO 11135-1:2007
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-16-2019
Superseded by
Language(s)
English, French, Russian
Published date
04-27-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11135-1:2007 specifies requirements for the development, validation and routine control of an ethylene oxide sterilization process for medical devices.
Sterilization processes validated and controlled in accordance with the requirements of ISO 11135-1:2007 are not assumed to be effective in inactivating the causative agents of spongiform encephalopathies such as scrapie, bovine spongiform encephalopathy and Creutzfeld Jacob disease. Specific recommendations have been produced in particular countries for the processing of materials potentially contaminated with these agents.
| DevelopmentNote |
Supersedes ISO/DIS 11135-1. (04/2007)
|
| DocumentType |
Standard
|
| Pages |
41
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN ISO 11135-1 : 2007 | Identical |
| NBN EN ISO 11135-1 : 2007 | Identical |
| NEN EN ISO 11135-1 : 2007 | Identical |
| NS EN ISO 11135-1 : 1ED 2007 | Identical |
| I.S. EN ISO 11135-1:2007 | Identical |
| PN EN ISO 11135-1 : 2009 | Identical |
| SAC GB 18279.1 : 2015 | Identical |
| SN EN ISO 11135-1 : 2007 | Identical |
| UNI EN ISO 11135-1 : 2008 | Identical |
| UNE-EN ISO 11135-1:2007 | Identical |
| BS EN ISO 11135-1:2007 | Identical |
| AAMI ISO 11135-1 : 2007 | Identical |
| EN ISO 11135-1:2007 | Identical |
| DIN EN ISO 11135-1:2007-08 | Identical |
| CSA Z15882 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNE-EN ISO 25539-2:2013 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
| ISO 14708-1:2014 | Implants for surgery — Active implantable medical devices — Part 1: General requirements for safety, marking and for information to be provided by the manufacturer |
| 10/30212297 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES |
| 08/30149503 DC : DRAFT JAN 2008 | BS EN ISO 14161 - STERILIZATION OF HEALTH CAR PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| 16/30331650 DC : 0 | BS EN ISO 8637-1 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 1: HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| DD ISO/TS 12417:2011 | Cardiovascular implants and extracorporeal systems. Vascular device-drug combination products |
| I.S. EN ISO 10555-1:2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS (ISO 10555-1:2013/AMD 1:2017) |
| UNE-EN ISO 25539-3:2012 | Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) |
| I.S. EN ISO 10555-6:2017 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015) |
| DIN EN ISO 8638:2014-03 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010) |
| ANSI/AAMI/ISO 14160:2011(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DD CEN ISO/TS 11135-2:2008 | Sterilization of health care products. Ethylene oxide Guidance on the application of ISO 11135-1 |
| CSA Z15882:09 (R2019) | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (Adopted ISO 15882:2008, second edition, 2008-09-01) |
| I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| BS EN ISO 8638:2014 | Cardiovascular implants and extracorporeal systems. Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters |
| ANSI/AAMI/ISO 25539-2:2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS |
| 07/30157769 DC : DRAFT DEC 2007 | BS EN ISO 11737-2 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE VALIDATION OF A STERILIZATION PROCESS |
| CSA Z11135-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| CSA Z1416: 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| CSA ISO 8637 : 2012 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 8637 : 2012 : R2017 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| DIN EN ISO 5840-3:2013-06 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| ONORM EN ISO 5840-3 : 2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
| AAMI ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| S.R. CEN ISO/TS 16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 (ISO/TS 16775:2014) |
| CAN/CSA-ISO/TS 16775:17 | Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2 (Adopted ISO technical specification 16775:2014, first edition, 2014-05-15) |
| ISO/TS 12417:2011 | Cardiovascular implants and extracorporeal systems Vascular device-drug combination products |
| PD ISO/TS 17137:2014 | Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| DIN EN 1642:2012-06 | Dentistry - Medical devices for dentistry - Dental implants |
| ISO 8637:2010 | Cardiovascular implants and extracorporeal systems Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators |
| ISO 8638:2010 | Cardiovascular implants and extracorporeal systems Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters |
| UNE-EN ISO 14161:2010 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| BS EN ISO 14534:2015 | Ophthalmic optics. Contact lenses and contact lens care products. Fundamental requirements |
| ISO 25539-3:2011 | Cardiovascular implants — Endovascular devices — Part 3: Vena cava filters |
| BS EN ISO 14160:2011 | Sterilization of health care products. Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives. Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| UNE-EN ISO 16672:2016 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| BS EN ISO 14630:2012 | Non-active surgical implants. General requirements |
| BS EN ISO 14161:2009 | Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results |
| ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
| EN ISO 25539-3:2011 | Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) |
| EN 12182:2012 | Assistive products for persons with disability - General requirements and test methods |
| EN ISO 8638:2014 | Cardiovascular implants and extracorporeal systems - Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (ISO 8638:2010) |
| DIN EN ISO 15882:2008-12 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNI EN ISO 14160 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15798:2013 | OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES (ISO 15798:2013) |
| ISO 13960:2010 | Cardiovascular implants and extracorporeal systems Plasmafilters |
| 13/30261812 DC : 0 | BS ISO 10555-6 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS |
| 13/30283691 DC : 0 | BS EN ISO 1135-4 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 4: TRANSFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| UNE-EN ISO 13504:2013 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| PD CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices. Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| 14/30273161 DC : 0 | BS EN 556-2 - STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED ''STERILE'' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| AAMI ISO 5361 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| AAMI ISO 10993-7:2008(R2012) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| 17/30357741 DC : 0 | BS ISO 11040-6 - PREFILLED SYRINGES - PART 6: PLASTIC BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| ISO 11040-6:2012 | Prefilled syringes Part 6: Plastic barrels for injectables |
| I.S. EN ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES (ISO 5840-3:2013) |
| 14/30281560 DC : 0 | BS EN ISO 5840-2 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 2: SURGICALLY IMPLANTED HEART VALVE SUBSTITUTES |
| 13/30278952 DC : 0 | BS EN 16372 - AESTHETIC SURGERY AND AESTHETIC NON-SURGICAL MEDICAL SERVICES |
| BS ISO 11658:2012 | Cardiovascular implants and extracorporeal systems. Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| DIN EN ISO 13408-1:2015-12 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| 11/30212235 DC : 0 | BS EN ISO 13504 - DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| DIN EN ISO 25539-3:2012-03 | Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) |
| 15/30280904 DC : 0 | BS ISO 18190 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT |
| CSA Z14161 : 2011 : R2015 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| NF CEN ISO/TS 11135-2 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| 15/30275221 DC : 0 | BS ISO 18241 - CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS |
| BS ISO 18241:2016 | Cardiovascular implants and extracorporeal systems. Cardiopulmonary bypass systems. Venous bubble traps |
| CSA Z11135-2 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| DIN EN ISO 10555-6:2017-11 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS (ISO 10555-6:2015) |
| CSA ISO 8638 : 2012 : R2017 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| BS EN ISO 10555-1 : 2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
| ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
| ANSI/AAMI/ISO 5840-3:2013 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 3: HEART VALVE SUBSTITUTES IMPLANTED BY TRANSCATHETER TECHNIQUES |
| UNE-EN ISO 20072:2013 | Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009) |
| BS EN ISO 13408-1:2015 | Aseptic processing of health care products General requirements |
| AAMI ISO 11737-2 : 2009 : R2014 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| AAMI ISO 8638 : 2010 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS |
| AAMI ISO 11737-2 :2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| AAMI ISO TIR 17137 : 2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOVASCULAR ABSORBABLE IMPLANTS |
| AAMI ISO 8638 : 2010 : R2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HEMODIALYZERS, HEMODIAFILTERS AND HEMOFILTERS |
| ANSI/AAMI/IEC TIR62354:2015 | GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| DIN EN 1639:2010-02 | Dentistry - Medical devices for dentistry - Instruments |
| DIN EN 12182:2012-07 | Assistive products for persons with disability - General requirements and test methods |
| DIN EN ISO 16672:2015-12 | Ophthalmic implants - Ocular endotamponades (ISO 16672:2015) |
| BS EN ISO 11737-2:2009 | Sterilization of medical devices. Microbiological methods Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| BS EN 45502-1:2015 | Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer |
| BS EN 1639:2009 | Dentistry. Medical devices for dentistry. Instruments |
| BS EN ISO 8536-8:2015 | Infusion equipment for medical use Infusion sets for single use with pressure infusion apparatus |
| EN ISO 25539-2:2012 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
| I.S. EN ISO 14534:2015 | OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011) |
| I.S. EN ISO 8536-10:2015 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-10:2015) |
| I.S. EN ISO 22794:2009 | DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| I.S. EN ISO 17510-1:2009 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ONORM EN ISO 25539-2 : 2013 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS (ISO 25539-2:2012) |
| EN ISO 17510-1:2009 | Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) |
| I.S. EN 12182:2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 7885:2010-06 | Dentistry - Sterile injection needles for single use (ISO 7885:2010) |
| I.S. EN ISO 14160:2011 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 1642:2011 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS |
| I.S. EN 1639:2009 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - INSTRUMENTS |
| I.S. EN ISO 7885:2010 | DENTISTRY - STERILE INJECTION NEEDLES FOR SINGLE USE |
| I.S. EN ISO 10451:2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| UNI EN ISO 11737-2 : 2010 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| I.S. EN ISO 14630:2012 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 14630:2012) |
| I.S. EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN ISO 8536-8:2015 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 8536-8:2015) |
| I.S. EN ISO 15882:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| I.S. EN ISO 16672:2015 | OPHTHALMIC IMPLANTS - OCULAR ENDOTAMPONADES (ISO 16672:2015) |
| UNI EN 1642 : 2012 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - DENTAL IMPLANTS |
| OVE/ONORM EN 60601-1 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005 + COR.:2006 + COR.:2007 + A1:2012) |
| VDI/VDE 3516 Blatt 2:1981-07 | Process analytical equipment for fluids |
| BS ISO 11040-6:2012 | Prefilled syringes Plastic barrels for injectables |
| DIN EN ISO 8637:2014-03 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1:2013-04-01) |
| 14/30270462 DC : 0 | BS EN ISO 5840-1 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES - PART 1: GENERAL REQUIREMENTS |
| PREN 556-2 : DRAFT 2014 | STERILIZATION OF MEDICAL DEVICES - REQUIREMENTS FOR MEDICAL DEVICES TO BE DESIGNATED 'STERILE' - PART 2: REQUIREMENTS FOR ASEPTICALLY PROCESSED MEDICAL DEVICES |
| 10/30196945 DC : 0 | BS ISO 25539-3 - CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS |
| 13/30285624 DC : 0 | BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| PD IEC/TR 60601-4-1:2017 | Medical electrical equipment Guidance and interpretation. Medical electrical equipment and medical electrical systems employing a degree of autonomy |
| 15/30317874 DC : 0 | BS EN 16844 - AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
| BS ISO 10555-6 : 2015 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 6: SUBCUTANEOUS IMPLANTED PORTS |
| 13/30254718 DC : 0 | BS ISO 11040-7 - PREFILLED SYRINGES - PART 7: PACKAGING SYSTEMS FOR STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| EN ISO 10555-6:2017 | Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015) |
| BS EN ISO 5840-3:2013 | Cardiovascular implants. Cardiac valve prostheses Heart valve substitutes implanted by transcatheter techniques |
| 09/30207531 DC : 0 | BS EN ISO 14534 - OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS |
| BS ISO 28620:2010 | Medical devices. Non-electrically driven portable infusion devices |
| 11/30193150 DC : 0 | BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| AAMI ISO 15882 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| 11/30228364 DC : 0 | BS EN ISO 10555-1 - INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 1: GENERAL REQUIREMENTS |
| 12/30254927 DC : 0 | BS EN 16372 - AESTHETIC SURGERY SERVICES |
| UNI EN ISO 20072 : 2013 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
| 08/30178723 DC : DRAFT AUG 2008 | BS ISO 15798 - OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES |
| AAMI ISO 13408-1 : 2008 : R2011 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 8637:2014 | Cardiovascular implants and extracorporeal systems. Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 8637 : 2012 : INC : AMD 1 : 2015 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| ISO 18241:2016 | Cardiovascular implants and extracorporeal systems — Cardiopulmonary bypass systems — Venous bubble traps |
| ANSI/AAMI/ISO 14708-1:2014 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| AAMI ISO 25539-3 : 2011 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS |
| AAMI ISO 10993-7 : 2008 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| ANSI/AAMI/ISO 11658:2012 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - BLOOD/TISSUE CONTACT SURFACE MODIFICATIONS FOR EXTRACORPOREAL PERFUSION SYSTEMS |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI/ISO 18241:2016 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - CARDIOPULMONARY BYPASS SYSTEMS - VENOUS BUBBLE TRAPS |
| UNI CEN ISO/TS 11135-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| I.S. EN ISO 8637:2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS (ISO 8637:2010, INCLUDING AMENDMENT 1 2013-04-01) |
| UNI EN ISO 5361 : 2013 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| ISO 11658:2012 | Cardiovascular implants and extracorporeal systems — Blood/tissue contact surface modifications for extracorporeal perfusion systems |
| IEC TR 60601-4-1:2017 | Medical electrical equipment - Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomy |
| I.S. EN ISO 8638:2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS (ISO 8638:2010) |
| IEC TR 62354:2014 | General testing procedures for medical electrical equipment |
| I.S. EN ISO 25539-3:2011 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS (ISO 25539-3:2011) |
| UNI EN ISO 25539-3 : 2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS |
| ISO 15798:2013 | Ophthalmic implants Ophthalmic viscosurgical devices |
| ASTM F 2903 : 2011 | Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair (Withdrawn 2020) |
| I.S. EN ISO 20072:2013 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009) |
| BS EN ISO 10555-6:2017 | Intravascular catheters. Sterile and single-use catheters Subcutaneous implanted ports |
| UNI EN ISO 8637 : 2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
| ISO 10555-6:2015 | Intravascular catheters Sterile and single-use catheters Part 6: Subcutaneous implanted ports |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| DIN EN ISO 22794:2009-11 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15) |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| DIN EN ISO 10993-7:2009-02 | Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:2008) |
| DIN EN ISO 8536-10:2015-11 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 10: ACCESSORIES FOR FLUID LINES FOR SINGLE USE WITH PRESSURE INFUSION EQUIPMENT (ISO 8536-10:2015) |
| BS EN ISO 8536-10:2015 | Infusion equipment for medical use Accessories for fluid lines for single use with pressure infusion equipment |
| UNI EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| UNE-EN ISO 8536-8:2015 | Infusion equipment for medical use - Part 8: Infusion sets for single use with pressure infusion apparatus (ISO 8536-8:2015) |
| UNE-EN ISO 14160:2012 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| BS EN 30-1-2:2012 | Domestic cooking appliances burning gas. Safety Appliances having forced-convection ovens and/or grills |
| I.S. EN ISO 14161:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| I.S. EN ISO 11737-2:2009 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| I.S. EN ISO 10993-7:2008 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS (ISO 10993-7:2008) |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| EN ISO 14161:2009 | Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) |
| UNE-EN ISO 7885:2010 | Dentistry - Sterile injection needles for single use (ISO 7885:2010) |
| ONORM EN ISO 15798 : 2013 AMD 1 2018 | OPHTHALMIC IMPLANTS - OPHTHALMIC VISCOSURGICAL DEVICES (ISO 15798:2013) |
| UNI EN ISO 10451 : 2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| UNI EN 1639 : 2010 | DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - INSTRUMENTS |
| EN 45502-1:2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN ISO 15882 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| UNI EN 12182 : 2012 | ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 10993-7 : 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS |
| UNI EN ISO 14630 : 2013 | NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS |
| DIN EN ISO 13504:2012-10 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| BS EN ISO 25539-2:2012 | Cardiovascular implants. Endovascular devices Vascular stents |
| DIN EN ISO 20072:2013-10 | AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009) |
| PREN ISO 14160 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 20072:2013 | Aerosol drug delivery device design verification. Requirements and test methods |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| BS ISO 11040-7:2015 | Prefilled syringes Packaging systems for sterilized subassembled syringes ready for filling |
| 11/30243761 DC : 0 | BS ISO 14708-7 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 7: PARTICULAR REQUIREMENTS FOR COCHLEAR IMPLANT SYSTEMS |
| BS EN ISO 13504:2012 | Dentistry. General requirements for instruments and related accessories used in dental implant placement and treatment |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| 14/30295064 DC : 0 | BS EN ISO 16672 - OPHTHALMIC IMPLANTS - OCULAR ENDOTAMPONADES |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| 14/30281859 DC : 0 | BS ISO 5361 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| AAMI ISO 8637 : 2010 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HEMODIALYZERS, HEMODIAFILTERS, HEMOFILTERS AND HEMOCONCENTRATORS |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| 13/30233325 DC : 0 | BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| UNI EN ISO 13504 : 2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT |
| 09/30157765 DC : 0 | BS EN ISO 14160 REV - STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 14/30289934 DC : 0 | BS ISO 18385 - MINIMIZING THE RISK OF DNA CONTAMINATION IN PRODUCTS USED TO COLLECT AND ANALYSE BIOLOGICAL MATERIAL FOR FORENSIC PURPOSES |
| 12/30244415 DC : DRAFT APR 2012 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| 16/30331653 DC : 0 | BS EN ISO 8637-2 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 2: EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| 10/30208681 DC : DRAFT SEP 2010 | BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF SAFETY ASPECTS IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES |
| 07/30145258 DC : 0 | BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS |
| CSA ISO 27427 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| CSA Z11135-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| EN ISO 14160:2011 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| UNI EN ISO 25539-2 : 2013 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS |
| DIN EN ISO 25539-2:2013-05 | Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) |
| AAMI ISO 13408-1:2008 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 25539-3 : 2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 3: VENA CAVA FILTERS |
| UNI EN ISO 8638 : 2014 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| AAMI ISO 14161 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS |
| ANSI/AAMI/ISO TIR16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| PD ISO/TS 19930:2017 | Guidance on aspects of a risk-based approach to assuring sterility of terminally sterilized, single-use health care product that is unable to withstand processing to achieve maximally a sterility assurance level of 10-6 |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| ISO 13485 - PRACTICAL GUIDE : 2016 | ISO 13485:2016 - MEDICAL DEVICES - A PRACTICAL GUIDE |
| UNI EN ISO 17510-1 : 2009 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| EN ISO 8637:2014 | Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637:2010, including Amendment 1 2013-04-01) |
| I.S. EN ISO 8536-4:2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010) |
| BS EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
| DIN EN ISO 14630:2013-03 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| DIN EN ISO 14160:2011-10 | Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO 14160:2011) |
| DIN EN ISO 14161:2010-03 | STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS |
| DIN EN ISO 8536-4:2013-07 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013) |
| DIN EN ISO 14534:2015-08 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 13504:2012 | Dentistry — General requirements for instruments and related accessories used in dental implant placement and treatment |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| BS EN ISO 17510-1:2009 | Sleep apnoea breathing therapy Sleep apnoea breathing therapy equipment |
| ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 8536-10:2015 | Infusion equipment for medical use Part 10: Accessories for fluid lines for single use with pressure infusion equipment |
| BS EN ISO 10993-7:2008 | Biological evaluation of medical devices Ethylene oxide sterilization residuals |
| ANSI/AAMI/ISO 15882:2008(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| EN ISO 11737-2:2009 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 20072:2009 | Aerosol drug delivery device design verification Requirements and test methods |
| UNE-EN ISO 8536-10:2015 | Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO 8536-10:2015) |
| ISO 5840-3:2013 | Cardiovascular implants Cardiac valve prostheses Part 3: Heart valve substitutes implanted by transcatheter techniques |
| ISO 16672:2015 | Ophthalmic implants Ocular endotamponades |
| ISO 25539-2:2012 | Cardiovascular implants Endovascular devices Part 2: Vascular stents |
| UNE-EN 1642:2012 | Dentistry - Medical devices for dentistry - Dental implants |
| ISO 14534:2011 | Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements |
| ISO 8536-8:2015 | Infusion equipment for medical use Part 8: Infusion sets for single use with pressure infusion apparatus |
| ISO/TS 11135-2:2008 | Sterilization of health care products Ethylene oxide Part 2: Guidance on the application of ISO 11135-1 |
| UNE-EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| ISO 8536-4:2010 | Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| UNE-EN ISO 14630:2013 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| ISO 14160:2011 | Sterilization of health care products Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives Requirements for characterization, development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 10451:2010 | Dentistry. Contents of technical file for dental implant systems |
| ISO 10451:2010 | Dentistry — Contents of technical file for dental implant systems |
| BS EN ISO 15882:2008 | Sterilization of health care products. Chemical indicators. Guidance for selection, use and interpretation of results |
| BS EN 12182:2012 | Assistive products for persons with disability. General requirements and test methods |
| EN 30-1-2:2012 | Domestic cooking appliances burning gas - Safety - Part 1-2: Appliances having forced-convection ovens and/or grills |
| EN ISO 13408-1:2015 | Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008, including Amd 1:2013) |
| EN ISO 8536-10:2015 | Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO 8536-10:2015) |
| UNI CEN ISO/TS 16775 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| EN 1642:2011 | Dentistry - Medical devices for dentistry - Dental implants |
| EN ISO 8536-8:2015 | Infusion equipment for medical use - Part 8: Infusion sets for single use with pressure infusion apparatus (ISO 8536-8:2015) |
| EN 1639:2009 | Dentistry - Medical devices for dentistry - Instruments |
| EN ISO 10451:2010 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| EN ISO 22794:2009 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007, corrected version 2009-01-15) |
| EN ISO 20072:2013 | Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009) |
| EN ISO 14534:2015 | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011) |
| EN ISO 15882:2008 | Sterilization of health care products - Chemical indicators - Guidance for selection, use and interpretation of results (ISO 15882:2008) |
| EN ISO 14630:2012 | Non-active surgical implants - General requirements (ISO 14630:2012) |
| EN ISO 13504:2012 | Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO 13504:2012) |
| AAMI ISO TIR 12417 : 2011 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - VASCULAR DEVICE-DRUG COMBINATION PRODUCTS |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PREN 45502-1 : DRAFT 2013 | ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| I.S. EN ISO 25539-2:2012 | CARDIOVASCULAR IMPLANTS - ENDOVASCULAR DEVICES - PART 2: VASCULAR STENTS (ISO 25539-2:2012) |
| 16/30331656 DC : 0 | BS ISO 8637-3 - EXTRACORPOREAL SYSTEMS FOR BLOOD PURIFICATION - PART 3: PLASMAFILTERS |
| I.S. EN ISO 13504:2012 | DENTISTRY - GENERAL REQUIREMENTS FOR INSTRUMENTS AND RELATED ACCESSORIES USED IN DENTAL IMPLANT PLACEMENT AND TREATMENT (ISO 13504:2012) |
| BS ISO 27427:2013 | Anaesthetic and respiratory equipment. Nebulizing systems and components |
| 08/30170025 DC : DRAFT AUG 2008 | BS ISO 28620 - MEDICAL DEVICES - NON-ELECTRICALLY DRIVEN PORTABLE INFUSION DEVICES |
| I.S. EN ISO 13408-1:2015 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS (ISO 13408-1:2008, INCLUDING AMD 1:2013) |
| UNE-EN ISO 5840-3:2013 | Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) |
| CSA Z15882 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - GUIDANCE FOR SELECTION, USE AND INTERPRETATION OF RESULTS |
| BS EN ISO 25539-3:2011 | Cardiovascular implants. Endovascular devices Vena cava filters |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| CSA ISO 8638 : 2012 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - EXTRACORPOREAL BLOOD CIRCUIT FOR HAEMODIALYSERS, HAEMODIAFILTERS AND HAEMOFILTERS |
| 13/30283694 DC : 0 | BS EN ISO 1135-5 - TRANSFUSION EQUIPMENT FOR MEDICAL USE - PART 5: TRANSFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS |
| ISO/TS 17137:2014 | Cardiovascular implants and extracorporeal systems Cardiovascular absorbable implants |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| CSA Z17510.1 : 2010 | SLEEP APNOEA BREATHING THERAPY - PART 1: SLEEP APNOEA BREATHING THERAPY EQUIPMENT |
| AAMI ISO 13408-1 : 2008 : INC : AMD 1 : 2013 : R201100 | ASEPTIC PROCESSING OF HEALTH CARE PRODUCTS - PART 1: GENERAL REQUIREMENTS |
| CSA ISO 8637 : 2012 : INC : AMD 1 : 2015 : R2017 | CARDIOVASCULAR IMPLANTS AND EXTRACORPOREAL SYSTEMS - HAEMODIALYSERS, HAEMODIAFILTERS, HAEMOFILTERS AND HAEMOCONCENTRATORS |
| S.R. CEN ISO TS 11135-2:2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ISO 11135-1 |
| ISO 11040-7:2015 | Prefilled syringes — Part 7: Packaging systems for sterilized subassembled syringes ready for filling |
| ISO 10555-1:2013 | Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements |
| AAMI ISO TIR 11135-2 : 2008 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 11135-1 |
| UNI EN ISO 22794 : 2009 | DENTISTRY - IMPLANTABLE MATERIALS FOR BONE FILLING AND AUGMENTATION IN ORAL AND MAXILLOFACIAL SURGERY - CONTENTS OF A TECHNICAL FILE |
| BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
| ISO 28620:2010 | Medical devices Non-electrically driven portable infusion devices |
| ISO/IEC Guide 63:2012 | Guide to the development and inclusion of safety aspects in International Standards for medical devices |
| ISO 27427:2013 | Anaesthetic and respiratory equipment — Nebulizing systems and components |
| DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| DIN EN ISO 11737-2:2010-04 | STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE DEFINITION, VALIDATION AND MAINTENANCE OF A STERILIZATION PROCESS |
| DIN EN ISO 8536-8:2015-11 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 8: INFUSION SETS FOR SINGLE USE WITH PRESSURE INFUSION APPARATUS (ISO 8536-8:2015) |
| UNE-EN ISO 11737-2:2010 | Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) |
| ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| ISO 17510-1:2007 | Sleep apnoea breathing therapy Part 1: Sleep apnoea breathing therapy equipment |
| BS EN 1642:2011 | Dentistry. Medical devices for dentistry. Dental implants |
| BS EN ISO 16672:2015 | Ophthalmic implants. Ocular endotamponades |
| PD IEC/TR 62354:2014 | General testing procedures for medical electrical equipment |
| ISO 14630:2012 | Non-active surgical implants — General requirements |
| EN 45502-1 : 2015 | IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| EN ISO 10993-7 : 2008 COR 2009 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS (ISO 10993-7:2008/COR 1:2009) |
| ONORM EN 794-3 : 2010 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| CSA ISO 5361 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - TRACHEAL TUBES AND CONNECTORS |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| IEC 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ISO 22442-1:2015 | Medical devices utilizing animal tissues and their derivatives Part 1: Application of risk management |
| ISO 11138-2:2017 | Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes |
| ISO 11140-1:2014 | Sterilization of health care products Chemical indicators Part 1: General requirements |
| ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
| ISO 10993-7:2008 | Biological evaluation of medical devices Part 7: Ethylene oxide sterilization residuals |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 22442-2:2015 | Medical devices utilizing animal tissues and their derivatives Part 2: Controls on sourcing, collection and handling |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
| ISO 22442-3:2007 | Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents |
| SA HB 13485:2020 | AS ISO 13485:2017 - Medical devices - A practical guide |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| ISO 17664:2017 | Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.