ISO 11078:2007
Current
Current
The latest, up-to-date edition.
Aircraft — De-icing/anti-icing fluids — ISO types II, III and IV
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
04-19-2007
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 11078:2007 defines the requirements for non Newtonian ISO types II, III and IV fluids used in the removal and prevention of ice, snow, or frost on exterior surfaces of main line and regional civil transport airplanes on the ground.
ISO 11078:2007 is applicable to de-icing/anti-icing fluids for use on airplanes in general. However, the applicability may have limitations for particular airplane types. It is the airplane operator's responsibility to consult the aircraft operations manual, the aircraft maintenance manual and the service letters of the airplane manufacturer, to determine any limitations/restrictions relating to the use of de-icing/anti-icing fluids that conform to ISO 11078:2007 for the type and model of airplane to be treated.
| Committee |
ISO/TC 20/SC 9
|
| DevelopmentNote |
Supersedes ISO/DIS 11078. (04/2007)
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 11078:2007 | Identical |
| 13/30283193 DC : 0 | BS EN 3021 - AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE FREE - TECHNICAL SPECIFICATIONS |
| NF EN 4708-101 : 2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| 14/30299187 DC : 0 | BS EN 12312-6 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DEICING/ANTIICING EQUIPMENT |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| 09/30205276 DC : 0 | BS EN 2311 - AEROSPACE SERIES - BUSHES WITH SELF-LUBRICATING LINER - TECHNICAL SPECIFICATION |
| PREN 2311 : 200P2 | AEROSPACE SERIES - BUSHES WITH SELF-LUBRICATING LINER - TECHNICAL SPECIFICATION |
| PREN 2755 : 200P3 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION |
| PREN 4708-101 : DRAFT 2015 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| PREN 3909 : 200P3 | AEROSPACE SERIES - TEST FLUIDS FOR ELECTRICAL AND OPTICAL COMPONENTS AND SUB-ASSEMBLIES |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| PREN 4540 : 200P2 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - TECHNICAL SPECIFICATION |
| SAE ARD 50102 : 2002 | FORCED AIR OR FORCED AIR/FLUID EQUIPMENT FOR REMOVAL OF FROZEN CONTAMINANTS |
| ISO 11076:2012 | Aircraft De-icing/anti-icing methods on the ground |
| I.S. EN 2755:2009 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION |
| BS EN 3909:2016 | Aerospace series. Test fluids and test methods for electrical and optical components and sub-assemblies |
| I.S. EN 3909:2016 | AEROSPACE SERIES - TEST FLUIDS AND TEST METHODS FOR ELECTRIC COMPONENTS AND SUB-ASSEMBLIES |
| EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| SAE ARP 5149 : 2013 | TRAINING PROGRAM GUIDELINES FOR DEICING/ANTI-ICING OF AIRCRAFT ON GROUND |
| 13/30271254 DC : 0 | BS ISO 11077 - AEROSPACE - SELF-PROPELLED DE-ICING/ANTI-ICING VEHICLES - FUNCTIONAL REQUIREMENTS |
| 16/30354036 DC : 0 | BS EN 4854-3 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 3: TECHNICAL SPECIFICATION |
| BS EN 4708-101:2017 | Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Polyolefin sleeving. Operating temperatures -55 °C to 135 °C. Product standard |
| FAA AC 135-16 : 0 | GROUND DEICING AND ANTI-ICING TRAINING AND CHECKING |
| PREN 4860 P1 : 2018 | AEROSPACE SERIES - ENVIRONMENTAL TESTING - TEST XB: ABRASION OF MARKINGS, LETTERINGS, SURFACES AND MATERIALS CAUSED BY RUBBING OF FINGERTIPS AND HANDS |
| PREN 4641-102 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 12312-6:2017 | Aircraft ground support equipment. Specific requirements Deicers and de-icing/anti-icing equipment |
| BS EN 2311:2017 | Aerospace series. Bushes with self-lubricating liner. Technical specification |
| I.S. EN 12312-6:2017 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 6: DEICERS AND DE-ICING/ANTI-ICING EQUIPMENT |
| 08/30193437 DC : 0 | BS EN 4540 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD UNDER LOW OSCILLATIONS - TECHNICAL SPECIFICATION |
| BS EN 4641-102:2009 | Aerospace series. Cables, optical 125 μm outside diameter cladding Semi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard |
| I.S. EN 4641-102:2009 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| FAA AC 120-60 : 2004 | GROUND DEICING AND ANTI-ICING PROGRAM |
| BS ISO 11077:2014 | Aircraft ground equipment. De-icers. Functional requirements |
| BS EN 2755:2009 | Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification |
| 10/30232156 DC : 0 | BS ISO 11076 - AIRCRAFT - DE-ICING/ANTI-ICING METHODS ON THE GROUND |
| PREN 6059-303 : 200P3 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| PREN 4854-3 : 200P1 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS - PART 3: TECHNICAL SPECIFICATION |
| I.S. EN 2311:2017 | AEROSPACE SERIES - BUSHES WITH SELF-LUBRICATING LINER - TECHNICAL SPECIFICATION |
| EN 4708-101:2017 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 101: Polyolefin sleeving - Operating temperatures -55 °C to 135 °C - Product standard |
| I.S. EN 4540:2011 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - TECHNICAL SPECIFICATION |
| BS EN 4540:2011 | Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification |
| 06/30152010 DC : 0 | EN 2755 - BEARING SPHERICAL JOINTS C/R STEEL, SELF-LUB LINER - EL. LOAD |
| BS ISO 10792-3:1995 | Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Technical specification |
| UNI EN 4540 : 2012 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER ELEVATED LOAD UNDER LOW OSCILLATIONS - TECHNICAL SPECIFICATION |
| BS M 77:1994 | Self-propelled de-icing/anti-icing vehicles. Functional requirements |
| SAE AIR 6284 : 2015 | FORCED AIR OR FORCED AIR/FLUID EQUIPMENT FOR REMOVAL OF FROZEN CONTAMINANTS |
| BS ISO 11076:2012 | Aircraft. De-icing/anti-icing methods on the ground |
| 14/30311577 DC : DRAFT AUG 2014 | BS EN 2311 - AEROSPACE SERIES - BUSHES WITH SELF-LUBRICATING LINER - TECHNICAL SPECIFICATION |
| 05/30141941 DC : DRAFT NOV 2005 | ISO 11076 - AIRCRAFT - GROUND-BASED DE-ICING/ANTI-ICING METHODS WITH FLUIDS |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| I.S. EN 4708-101:2017 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 101: POLYOLEFIN SLEEVING - OPERATING TEMPERATURES -55 DEGREES C TO 135 DEGREES C - PRODUCT STANDARD |
| NF EN 2755 : 2010 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION |
| UNE-EN 12312-6:2017 | Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/anti-icing equipment |
| BS EN 6059-303:2017 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Resistance to fluids |
| ISO 11077:2014 | Aircraft ground equipment De-icers Functional requirements |
| ISO 10792-3:1995 | Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 3: Technical specification |
| EN 4540:2011 | Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Technical specification |
| EN 6059-303:2017 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 303: Resistance to fluids |
| ONORM EN 2755 : 2009 | AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER - ELEVATED LOAD AT AMBIENT TEMPERATURE - TECHNICAL SPECIFICATION |
| EN 4641-102:2009 | Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard |
| EN 3909:2016 | Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies |
| EN 2311:2017 | Aerospace series - Bushes with self-lubricating liner - Technical specification |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| I.S. EN 6059-303:2017 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 303: RESISTANCE TO FLUIDS |
| EN 2755:2009 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Elevated load at ambient temperature - Technical specification |
| SAE AMS 1428 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
| FAA AC 20-117 : 1982 | HAZARDS FOLLOWING GROUND DEICING AND GROUND OPERATIONS IN CONDITIONS CONDUCIVE TO AIRCRAFT ICING |
| ISO 11076:2012 | Aircraft De-icing/anti-icing methods on the ground |
| FAA AC 135-16 : 0 | GROUND DEICING AND ANTI-ICING TRAINING AND CHECKING |
| FAA AC 120-60 : 2004 | GROUND DEICING AND ANTI-ICING PROGRAM |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.