ISO 10931:2005
Current
Current
The latest, up-to-date edition.
Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
12-07-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 10931:2005 specifies the characteristics and requirements for components such as pipes, fittings and valves made from poly (vinylidene fluoride) (PVDF), intended to be used for thermoplastics piping systems in the field of industrial applications above-ground.
| DevelopmentNote |
Supersedes ISO/DIS 10931, ISO 10931-1, ISO 10931-2, ISO 10931-3, ISO 10931-4 and ISO 10931-5. (12/2005)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 10931 : 2006 AMD 1 2015 | Identical |
| NBN EN ISO 10931 : 2006 AMD 1 2015 | Identical |
| NEN EN ISO 10931 : 2005 AMD 1 2015 | Identical |
| NS EN ISO 10931 : 2005 | Identical |
| I.S. EN ISO 10931:2006 | Identical |
| PN EN ISO 10931 : 2007 | Identical |
| SN EN ISO 10931 : 2006 AMD 1 2015 | Identical |
| UNI EN ISO 10931 : 2006 | Identical |
| BS EN ISO 10931 : 2005 | Identical |
| UNE-EN ISO 10931:2006 | Identical |
| DIN EN ISO 10931:2015-11 | Identical |
| BS EN ISO 10931:2005+A1:2015 | Identical |
| UNE-EN ISO 10931:2005 | Identical |
| UNI EN 15014 : 2008 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| 11/30239906 DC : 0 | BS EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER AND OTHER LIQUIDS UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| I.S. EN ISO 16136:2006 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16138:2006 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16139:2006 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 21787:2006 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16135:2006 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16139 : 2008 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16137:2006 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| BS EN ISO 16135:2006 | Industrial valves. Ball valves of thermoplastic materials |
| BS EN ISO 16139:2006 | Industrial valves. Gate valves of thermoplastic materials |
| DD ISO/TS 26873:2010 | Plastics pipes and fittings. Definition and construction procedures for reference lines |
| ONORM EN ISO 16136 : 2008 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| ONORM EN ISO 16137 : 2008 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| VDI 2083 Blatt 13.3:2010-10 | Cleanroom technology - Quality, production, and distribution of ultrapure water - Pharmacy and other life-science applications |
| VDI 2083 Blatt 13.2:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Microelectronics and other technical applications |
| VDI 2083 Blatt 13.1:2009-01 | Cleanroom technology - Quality, production and distribution of ultrapure water - Fundamentals |
| BS ISO 9393-1:2004 | Thermoplastics valves for industrial applications. Pressure test methods and requirements General |
| ONORM EN ISO 16138 : 2008 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16135:2006-06 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| BS EN ISO 16138:2006 | Industrial valves. Diaphragm valves of thermoplastics materials |
| ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
| ONORM EN ISO 16135 : 2008 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16138:2006-06 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16136:2006-06 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16137:2006-06 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16139:2006-06 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
| BS EN ISO 16137:2006 | Industrial valves. Check valves of thermoplastic materials |
| BS EN ISO 21787:2006 | Industrial valves. Globe valves of thermoplastics materials |
| ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
| BS EN ISO 16136:2006 | Industrial valves. Butterfly valves of thermoplastic materials |
| ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
| DIN EN ISO 21787:2006-06 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
| DIN EN 15389:2008-10 | INDUSTRIAL VALVES - PERFORMANCE CHARACTERISTICS OF THERMOPLASTIC VALVES WHEN USED AS CONSTRUCTION PRODUCTS |
| ISO/TS 26873:2010 | Plastics pipes and fittings — Definition and construction procedures for reference lines |
| ONORM EN ISO 21787 : 2008 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
| PIP PHSMV042 : 2017 | HYGIENIC PLASTIC DIAPHRAGM VALVE DESCRIPTIONS |
| PIP PHSMV042:2017(R2024) | PIP PHSMV042 Hygienic for Food/Beverage/Consumer & CGMP Products Plastic Diaphragm Valve Descriptions |
| ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
| ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
| ISO/TR 10358:1993 | Plastics pipes and fittings Combined chemical-resistance classification table |
| ISO 10241:1992 | International terminology standards Preparation and layout |
| ISO 2507-2:1995 | Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| ISO 265-1:1988 | Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
| ISO 2507-1:1995 | Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| ISO 11357-3:2011 | Plastics Differential scanning calorimetry (DSC) Part 3: Determination of temperature and enthalpy of melting and crystallization |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| ISO 12092:2000 | Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure Resistance to internal pressure Test method |
| EN 1778:1999 | Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment |
| ISO 15853:1999 | Thermoplastics materials Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 472:2013 | Plastics — Vocabulary |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 2505-1:1994 | Thermoplastics pipes Longitudinal reversion Part 1: Determination methods |
| ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
| ISO 1183-2:2004 | Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method |
| ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
| ISO 9631:2003 | Rubber seals Joint rings for pipelines for hot-water supply up to 110 degrees C Specification for the material |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
| ISO/TR 16913:1999 | Plastics pipes and fittings — Definitions of types of test |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
| ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.