ISO 10524-1:2006
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
03-27-2019
Superseded by
Language(s)
English, French, Russian
Published date
01-30-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 10524-1:2006 is applicable to the types of pressure regulators listed and is intended for the administration of the following medical gases in the treatment, management, diagnostic evaluation and care of patients:
- oxygen;
- nitrous oxide;
- air for breathing;
- helium;
- carbon dioxide;
- xenon;
- mixtures of the gases listed above;
- air for driving surgical tools;
- nitrogen for driving surgical tools.
These pressure regulators are intended to be fitted to cylinders with nominal filling pressures up to 25 000 kPa at 15 C and can be provided with devices which control and measure the flow of the medical gas delivered.
The types of pressure regulators covered by ISO 10524-1:2006 are as follows:
- pressure regulators intended to be connected to cylinders by the operator;
- pressure regulators with integral flow-metering devices intended to be connected to cylinders by the operator;
- pressure regulators that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators, resuscitators).
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NS EN ISO 10524-1 : 1ED 2006 | Identical |
| PN EN ISO 10524-1 : 2006 | Identical |
| I.S. EN ISO 10524-1:2006 | Identical |
| BIS IS/ISO 10524-1 : 2006 | Identical |
| UNI EN ISO 10524-1 : 2006 | Identical |
| UNE-EN ISO 10524-1:2007 | Identical |
| NEN EN ISO 10524-1 : 2006 | Identical |
| NBN EN ISO 10524-1 : 2006 | Identical |
| BS EN ISO 10524-1:2006 | Identical |
| DIN EN ISO 10524-1:2006-05 | Identical |
| DS EN ISO 10524-1 : 2006 | Identical |
| SN EN ISO 10524-1 : 2006 | Identical |
| NF EN ISO 10524-1 : 2006 | Identical |
| EN ISO 10524-1:2006 | Identical |
| ONORM EN ISO 10524-1 : 2006 | Identical |
| 17/30337954 DC : 0 | BS ISO 19211 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - FIRE-ACTIVATED OXYGEN SHUT-OFF DEVICES FOR USE DURING OXYGEN THERAPY |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| DIN EN ISO 80601-2-69:2014-12 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| BS EN ISO 80601-2-69:2014 | Medical electrical equipment Particular requirements for basic safety and essential performance of oxygen concentrator equipment |
| 13/30268585 DC : 0 | BS EN ISO 10079-1 - MEDICAL SUCTION EQUIPMENT - PART 1: ELECTRICALLY POWERED SUCTION EQUIPMENT |
| 09/30203808 DC : 0 | BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| ASTM G 74 : 2013 : REDLINE | Standard Test Method for Ignition Sensitivity of Nonmetallic Materials and Components by Gaseous Fluid Impact |
| CAN/CSA-C22.2 NO. 80601-2-72:17 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations) |
| CSA Z8185 : 2008(R2013) | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| CSA Z8185 : 2008 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| 04/30088362 DC : DRAFT NOV 2004 | ISO 10651-5 - LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY VENTILATORS |
| UNE-EN ISO 80601-2-69:2015 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| ISO 27427:2013 | Anaesthetic and respiratory equipment — Nebulizing systems and components |
| I.S. EN ISO 10524-4:2008 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOWPRESSURE REGULATORS |
| BS EN ISO 80601-2-12:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators |
| BS EN ISO 80601-2-13:2012+A2:2019 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| BS EN 13718-1:2014 | Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances |
| EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| ISO 10524-4:2008 | Pressure regulators for use with medical gases — Part 4: Low-pressure regulators |
| BS EN ISO 15001:2011 | Anaesthetic and respiratory equipment. Compatibility with oxygen |
| DIN EN ISO 10524-2:2006-07 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| EN ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008) |
| EN ISO 80601-2-13:2012 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| EN 13544-1:2007+A1:2009 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
| BS EN ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| CSA Z10524-2 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| BS EN ISO 80601-2-13:2012 | Medical electrical equipment Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| BS ISO 10651-5:2006 | Lung ventilators for medical use. Particular requirements for basic safety and essential performance Gas-powered emergency resuscitators |
| DIN EN ISO 80601-2-72:2016-04 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| UNI EN ISO 80601-2-12 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| 15/30280904 DC : 0 | BS ISO 18190 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - GENERAL REQUIREMENTS FOR AIRWAYS AND RELATED EQUIPMENT |
| CAN/CSA-Z15002:12 (R2017) | Flow-metering devices for connection to terminal units of medical gas pipeline systems (Adopted ISO 15002:2008, second edition, 2008-07-01, with Canadian deviations) |
| 13/30276231 DC : 0 | BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| CSA Z1500:2012 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| I.S. EN ISO 80601-2-12:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011) |
| CSA C22.2 No. 80601-2-12 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| UNE-EN ISO 21969:2010 | High-pressure flexible connections for use with medical gas systems (ISO 21969:2009) |
| UNE-EN ISO 80601-2-13:2013 | Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) |
| ONORM EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| I.S. EN ISO 15001:2011 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010) |
| ONORM EN 1789 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| I.S. EN ISO 8185:2009 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| UNI EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| DIN EN 1789:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| I.S. EN ISO 21969:2009 | HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS |
| I.S. EN ISO 10079-3:2014 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014) |
| UNI EN ISO 15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| ASTM G 175 : 2013 : REDLINE | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
| BS EN ISO 80601-2-72:2015 | Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| 15/30300279 DC : 0 | BS ISO 80601-2-74 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-74: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY HUMIDIFYING EQUIPMENT |
| ISO/TS 22595-1:2006 | Dentistry Plant area equipment Part 1: Suction systems |
| AAMI ISO 10651-5 : 2006 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| UNI EN ISO 80601-2-69 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT |
| ISO 11195:2018 | Gas mixers for medical use — Stand-alone gas mixers |
| 16/30346835 DC : 0 | BS ISO 20789 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - PASSIVE HUMIDIFIERS |
| CSA ISO 10079-3:14 (R2019) | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (Adopted ISO 10079-3:2014, third edition, 2014-05-01) |
| BS EN ISO 5359 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| CSA ISO 10079-3 : 2014 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE |
| BS EN ISO 10524-2:2006 | Pressure regulators for use with medical gases Manifold and line pressure regulators |
| ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| DIN EN 13544-1:2009-12 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| DIN EN 13718-2:2015-05 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| DIN EN 13718-1:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| DIN EN ISO 10079-3:2014-09 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014) |
| DIN EN ISO 15001:2012-06 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| UNE-EN 13718-2:2015 | Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances |
| ISO 80601-2-69:2014 | Medical electrical equipment Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment |
| BS EN ISO 21969:2009 | High-pressure flexible connections for use with medical gas systems |
| I.S. EN 1789:2007 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| EN 1789:2007+A2:2014 | Medical vehicles and their equipment - Road ambulances |
| EN ISO 80601-2-69:2014 | Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) |
| I.S. EN 13544-1:2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| ONORM EN 13718-2 : 2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| CSA C22.2 No. 80601-2-12 : 2012(R2017) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| EN ISO 8185:2009 | Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems (ISO 8185:2007) |
| ONORM EN 13544-3 : 2010 | RESPIRATORY THERAPY EQUIPMENT - PART 3: AIR ENTRAINMENT DEVICES |
| UNI EN ISO 10079-3 : 2014 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE |
| UNI EN ISO 21969 : 2010 | HIGH-PRESSURE FLEXIBLE CONNECTIONS FOR USE WITH MEDICAL GAS SYSTEMS |
| UNI EN 13544-1 : 2009 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| UNI EN ISO 8185 : 2009 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| CSA Z10524-2 : 2012 : R2017 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| ISO 18190:2016 | Anaesthetic and respiratory equipment — General requirements for airways and related equipment |
| 13/30264413 DC : 0 | BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS |
| BS ISO 18190:2016 | Anaesthetic and respiratory equipment. General requirements for airways and related equipment |
| DIN EN ISO 15002:2008-11 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| 12/30244415 DC : DRAFT APR 2012 | BS ISO 27427 - ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| NF EN ISO 80601-2-12 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS |
| CSA Z15001 : 2012 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| CAN/CSA-Z15001:12 (R2017) | Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations) |
| ISO 80601-2-67:2014 | Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment |
| CSA C22.2 No. 80601-2-69 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT |
| CAN/CSA-C22.2 NO. 80601-2-67:17 | Medical electrical equipment — Part 2-67: Particular requirements for basic safety and essential performance of oxygen conserving equipment (Adopted ISO 80601-2-67:2014, first edition, 2014-06-01, with Canadian deviations) |
| I.S. EN ISO 15002:2008 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| EN ISO 10524-2:2006 | Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005) |
| I.S. EN ISO 80601-2-72:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015) |
| ISO 10524-2:2018 | Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators |
| ISO 10651-5:2006 | Lung ventilators for medical use Particular requirements for basic safety and essential performance Part 5: Gas-powered emergency resuscitators |
| ISO 80601-2-12:2011 | Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
| BS EN ISO 8185:2007 | Respiratory tract humidifiers for medical use. Particular requirements for respiratory humidification systems |
| UNE-EN ISO 10079-3:2014 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014) |
| ISO 21969:2009 | High-pressure flexible connections for use with medical gas systems |
| BS EN 13544-1 : 2007 | RESPIRATORY THERAPY EQUIPMENT - PART 1: NEBULIZING SYSTEMS AND THEIR COMPONENTS |
| BS EN ISO 10079-3:2014 | Medical suction equipment Suction equipment powered from a vacuum or positive pressure gas source |
| ISO 80601-2-72:2015 | Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
| EN 13718-1:2014 | Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
| BS EN 1789 : 2007 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| I.S. EN 13718-1:2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| UNE-EN 1789:2007 | Medical vehicles and their equipment - Road ambulances |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| BS EN 13718-2:2015 | Medical vehicles and their equipment. Air ambulances Operational and technical requirements for air ambulances |
| ISO 80601-2-13:2011 | Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| I.S. EN 13718-2:2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| ISO 10079-3:2014 | Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
| UNI EN ISO 80601-2-13 : 2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION |
| I.S. EN 13718-2:2015+A1:2020 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
| EN ISO 80601-2-72:2015 | Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015) |
| EN ISO 10079-3:2014 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014) |
| EN ISO 10524-4:2008 | Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008) |
| EN ISO 15001:2011 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| DIN EN ISO 10524-4:2008-09 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| 16/30314880 DC : 0 | BS EN ISO 9170-1 - TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
| CSA ISO 27427 : 2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - NEBULIZING SYSTEMS AND COMPONENTS |
| I.S. EN ISO 5359:2014 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| UNI EN ISO 10524-4 : 2008 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| BS ISO 27427:2013 | Anaesthetic and respiratory equipment. Nebulizing systems and components |
| BS EN ISO 10524-4:2008 | Pressure regulators for use with medical gases Low-pressure regulators |
| BIS IS/ISO 10524-4 : 2008 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| CSA Z10524-4 : 2012 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 4: LOW-PRESSURE REGULATORS |
| CAN/CSA-Z10524-4:12 (R2017) | Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (Adopted ISO 10524-4:2008, first edition, 2008-06-01, with Canadian deviations) |
| CSA Z5359 : 2016 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES, MEDICAL VACUUM, MEDICAL SUPPORT GASES, AND ANAESTHETIC GAS SCAVENGING SYSTEMS |
| I.S. EN ISO 80601-2-69:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-69: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF OXYGEN CONCENTRATOR EQUIPMENT (ISO 80601-2-69:2014) |
| I.S. EN ISO 80601-2-13:2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011) |
| DIN EN ISO 5359:2015-02 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES (ISO 5359:2014) |
| UNI EN ISO 15002 : 2008 | FLOW-METERING DEVICES FOR CONNECTION TO TERMINAL UNITS OF MEDICAL GAS PIPELINE SYSTEMS |
| I.S. EN ISO 10524-2:2006 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 2: MANIFOLD AND LINE PRESSURE REGULATORS |
| ISO 8185:2007 | Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems |
| UNE-EN ISO 15001:2012 | Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010) |
| DIN EN ISO 8185:2009-07 | RESPIRATORY TRACT HUMIDIFIERS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR RESPIRATORY HUMIDIFICATION SYSTEMS |
| EN ISO 21969:2009 | High-pressure flexible connections for use with medical gas systems (ISO 21969:2009) |
| UNI EN 1789 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
| DIN EN ISO 10079-3:2000-03 | MEDICAL SUCTION EQUIPMENT - PART 3: SUCTION EQUIPMENT POWERED FROM A VACUUM OR POSITIVE PRESSURE GAS SOURCE (ISO 10079-3:2014) |
| ONORM EN 794-3 : 2010 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
| CSA Z10651-5 : 2008 : R2018 | Lung Ventilators for Medical Use - Particular Requirements for Basic Safety and Essential Performance - Part 5: Gas-Powered Emergency Resuscitators |
| CSA Z10651-5 : 2008 : R2013 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z10651-5 : 2008 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| CSA Z10651-5 : 2008 : INC : UPD 1 : 2011 | LUNG VENTILATORS FOR MEDICAL USE - PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - PART 5: GAS-POWERED EMERGENCY RESUSCITATORS |
| UNE-EN 13544-1:2007 | Respiratory therapy equipment - Part 1: Nebulizing systems and their components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.