IPC OI 645 : 0
Current
Current
The latest, up-to-date edition.
STANDARD FOR VISUAL OPTICAL INSPECTION AIDS
Available format(s)
Hardcopy
Language(s)
English
Published date
10-01-1993
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1.0 General
1.1 Scope
1.2 Purpose
1.3 Usage grades
1.4 Certification test
2.0 Applicable documents
2.1 IPC
2.2 Military
2.3 Underwriters laboratories
3.0 Requirements
3.1 Related terms and definitions
3.2 Conflict
3.3 General requirements for all inspection grade
specifications in this standard
3.4 Magnifying aid inspection grades
4.0 Quality assurance provisions
4.1 Responsibility for certification
4.2 Categories of certification
4.3 Initial certification
4.4 Periodic recertification
4.5 Certification procedures
Establishes requirements, definitions and certification provisions for optical inspection aids and defines inspection grades that can be used as accept/reject criteria for the instrumentation used in an inspection process that uses optical inspection aids.
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
Institute of Printed Circuits
|
| Status |
Current
|
| DSCC 11001 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 1 (SINGLE-SIDED ) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER |
| DSCC 11004 : 0 | PRINTED WIRING BOARD, RIGID FLEX, TYPE 4 (MULTILAYERED) WITH SUPPORTED HOLES, WITH STIFFENER |
| DSCC 11005 : 0 | PRINTED WIRING BOARD, RIGID FLEX, TYPE 5 (MULTILAYER) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER |
| I.S. EN 61191-2:2017 | PRINTED BOARD ASSEMBLIES - PART 2: SECTIONAL SPECIFICATION - REQUIREMENTS FOR SURFACE MOUNT SOLDERED ASSEMBLIES |
| BS EN 61191-3:2017 | Printed board assemblies Sectional specification. Requirements for through-hole mount soldered assemblies |
| IEC 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| BS EN 61191-1:2013 | Printed board assemblies Generic specification. Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| I.S. EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013 (EQV)) |
| MIL-PRF-50884 Revision F:2014 | Printed Wiring Board, Flexible or Rigid-Flex, General Specification for |
| IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
| IPC J STD 001 SWEDISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC 9262 : 2016 | SPECIFICATION FOR CHARACTERIZATION AND VERIFICATION OF ASSEMBLY LEVEL AUTOMATIC OPTICAL INSPECTION EQUIPMENT |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| IPC J STD 001 RUSSIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 HUNGARIAN : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC J STD 001 TURKISH : E2010 | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 POLISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 TURKISH : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 HEBREW : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| IPC WHMA A 620 SPANISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 CHINESE : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 VIETNAMESE : B2012 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| MIL-PRF-31032-6 Revision B:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE SIDED, THERMOPLASTIC RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| IPC J STD 001 HUNGARIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL-PRF-31032-5 Revision B:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| IPC J STD 001 GERMAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 POLISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC J STD 001 ROMANIAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 DANISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 ESTONIAN : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 KOREAN : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IEC 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| I.S. EN 61191-4:2017 | PRINTED BOARD ASSEMBLIES - PART 4: SECTIONAL SPECIFICATION - REQUIREMENTS FOR TERMINAL SOLDERED ASSEMBLIES |
| IPC J STD 001 CHINESE : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| I.S. EN 61191-3:2017 | PRINTED BOARD ASSEMBLIES - PART 3: SECTIONAL SPECIFICATION - REQUIREMENTS FOR THROUGH-HOLE MOUNT SOLDERED ASSEMBLIES |
| IPC J STD 001 SPANISH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 FRENCH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC WHMA A 620 DANISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| BS EN 61191-4:2017 | Printed board assemblies Sectional specification. Requirements for terminal soldered assemblies |
| IPC A 630 : 0 | ACCEPTABILITY STANDARD FOR MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES |
| DSCC 11003 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 3 (MULTILAYER) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER |
| DSCC 11002 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 2 (DOUBLE-SIDED) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER |
| IEC 61191-1:2013 | Printed board assemblies - Part 1: Generic specification - Requirements for soldered electrical and electronic assemblies using surface mount and related assembly technologies |
| 15/30327712 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| 11/30255124 DC : 0 | BS EN 61191-1 - PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES |
| IEC 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| EN 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| EN 61191-3:2017 | Printed board assemblies - Part 3: Sectional specification - Requirements for through-hole mount soldered assemblies |
| EN 61191-1:2013 | PRINTED BOARD ASSEMBLIES - PART 1: GENERIC SPECIFICATION - REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES USING SURFACE MOUNT AND RELATED ASSEMBLY TECHNOLOGIES (IEC 61191-1:2013) |
| EN 61191-4:2017 | Printed board assemblies - Part 4: Sectional specification - Requirements for terminal soldered assemblies |
| DSCC 10012 : 0 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, GENERAL DRAWING |
| DSCC 10013 : 0 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, TYPE 3 WITH PLATED-THROUGH HOLES |
| DSCC 11006 : 0 | PRINTED WIRING BOARD, FLEXIBLE RIGID FLEX, GENERAL DRAWING |
| DSCC 10014:2012 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, TYPE 4 WITH BLIND AND BURIED VIAS |
| IPC A 600 : H | ACCEPTABILITY OF PRINTED BOARDS |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC MS 810 : 0 | GUIDELINES FOR HIGH VOLUME MICROSECTION |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| IPC S 100 : LATEST | STANDARDS AND SPECIFICATIONS MANUAL |
| IPC QE 605 : A | PRINTED BOARD QUALITY EVALUATION HANDBOOK |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.