IPC 2221B:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GENERIC STANDARD ON PRINTED BOARD DESIGN
Available format(s)
Hardcopy
Superseded date
01-22-2024
Superseded by
Language(s)
English
Published date
11-20-2012
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 GENERAL REQUIREMENTS
4 MATERIALS
5 MECHANICAL/PHYSICAL PROPERTIES
6 ELECTRICAL PROPERTIES
7 THERMAL MANAGEMENT
8 COMPONENT AND ASSEMBLY ISSUES
9 HOLES/INTERCONNECTIONS
10 GENERAL CIRCUIT FEATURE REQUIREMENTS
11 DOCUMENTATION
12 QUALITY ASSURANCE
APPENDIX A
APPENDIX B
APPENDIX C - Example of a Testability Design Checklist
This standard establishes the generic requirements for the design of organic printed boards and other forms of componentmounting or interconnecting structures, including PC card form factors.
| DevelopmentNote |
Supersedes MIL STD 2118, IPC D 949 & IPC ML 910. Together with IPC 2222 & IPC 2223 supersedes IPC D 249 & IPC D 275. Also available in CD-ROM format. Included in IPC 2220, IPC C 102, IPC C 106, IPC C 105 & IPC C 1000. (07/2009) A2003 is still active in Chinese Language, See separate record. (11/2012) Also available in German Language, See IPC 2221 GERMAN. (11/2013) Also available in French Language, See IPC 2221 FRENCH. (07/2015)
|
| DocumentType |
Revision
|
| ISBN |
978-1-61193-069-6
|
| Pages |
170
|
| PublisherName |
Institute of Printed Circuits
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DSCC 11001 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 1 (SINGLE-SIDED ) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER |
| SAE AIR 6127 : 2017 | MANAGING HIGHER VOLTAGES IN AEROSPACE ELECTRICAL SYSTEMS |
| BS EN 61182-2-2:2012 | Printed board assembly products. Manufacturing description data and transfer methodology Sectional requirements for implementation of printed board fabrication data description |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| DSCC 11004 : 0 | PRINTED WIRING BOARD, RIGID FLEX, TYPE 4 (MULTILAYERED) WITH SUPPORTED HOLES, WITH STIFFENER |
| I.S. EN 61182-2-2:2012 | PRINTED BOARD ASSEMBLY PRODUCTS - MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY - PART 2-2: SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF PRINTED BOARD FABRICATION DATA DESCRIPTION (IEC 61182-2-2:2012 (EQV)) |
| MIL-HDBK-1861 Revision B:2013 | Selection and Use1 of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware |
| DSCC 11005 : 0 | PRINTED WIRING BOARD, RIGID FLEX, TYPE 5 (MULTILAYER) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER |
| I.S. EN 140402-801:2015 | DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2 |
| IEC PAS 62250:2001 | Qualification and performance specification for rigid printed boards (IPC 6012A with Amendment 1) |
| BS EN 50155:2017 | Railway applications. Rolling stock. Electronic equipment |
| 16/30282633 DC : 0 | BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| EN 140402-801:2015 | Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2 |
| EN 61182-2-2:2012 | Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description |
| IPC 2222 GERMAN : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| IPC CM 770 : E | COMPONENT MOUNTING GUIDELINES FOR PRINTED BOARDS |
| IPC 2222 FRENCH : A2010 | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| MIL-PRF-50884 Revision F:2014 | Printed Wiring Board, Flexible or Rigid-Flex, General Specification for |
| IPC 4554 CHINESE : - | SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS |
| IPC 2224 : 0 | SECTIONAL STANDARD FOR DESIGN OF PWBS FOR PC CARDS |
| IPC AJ 820 : A | ASSEMBLY AND JOINING HANDBOOK |
| MIL-DTL-29563 Revision B:2014 | Antenna System, Aims Shipboard, Electronically Steered OE-120/UPX |
| IPC 6012 RUSSIAN : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| IPC J STD 001 SWEDISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC 4821 : 0 | SPECIFICATION FOR EMBEDDED PASSIVE DEVICE CAPACITOR MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| IPC J STD 001 RUSSIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 TURKISH : E2010 | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 POLISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| IPC 2223 CHINESE : C | SECTIONAL DESIGN STANDARD FOR FLEXIBLE PRINTED BOARDS |
| IPC 2225 : 0 | SECTIONAL DESIGN STANDARD FOR ORGANIC MULTICHIP MODULES (MCM-L) AND MCM-L ASSEMBLIES |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| IPC 6012 POLISH : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-PRF-55110 Revision H:2014 | Printed Wiring Board, Rigid, General Specification for |
| IPC 9241 : 2016 | GUIDELINES FOR MICROSECTION PREPARATION |
| MIL-PRF-31032-2 Revision C:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE LAYER, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING |
| IPC 2611 : 0 | GENERIC REQUIREMENTS FOR ELECTRONIC PRODUCT DOCUMENTATION |
| IPC 2612-1 : 0 | SECTIONAL REQUIREMENTS FOR ELECTRONIC DIAGRAMMING SYMBOL GENERATION METHODOLOGY |
| MIL-PRF-31032-1 Revision D:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT BLIND AND BURIED PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING |
| IPC 2222 CHINESE : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| IPC 2612 : 0 | SECTIONAL REQUIREMENTS FOR ELECTRONIC DIAGRAMMING DOCUMENTATION (SCHEMATIC AND LOGIC DESCRIPTIONS) |
| IPC 2316 : 0 | DESIGN GUIDE FOR EMBEDDED PASSIVE DEVICE PRINTED BOARDS |
| IPC 4553 : A | SPECIFICATION FOR IMMERSION SILVER PLATING FOR PRINTED BOARDS |
| IPC 2524 : 0 | PWB FABRICATION DATA QUALITY RATING SYSTEM |
| MIL-DTL-7788 Revision H:2011 | PANELS, INFORMATION, INTEGRALLY ILLUMINATED |
| IPC 6010 SERIES : LATEST | IPC-6010 QUALIFICATION AND PERFORMANCE SERIES |
| IPC 4761 : 0 | DESIGN GUIDE FOR PROTECTION OF PRINTED BOARD VIA STRUCTURES |
| IPC 2588 : 2007 | SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF PART LIST PRODUCT DATA DESCRIPTION |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| IPC 2583 : 2007 | SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF DESIGN CHARACTERISTICS FOR MANUFACTURING DATA DESCRIPTION |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-PRF-31032-4 Revision C:2017 | PRINTED WIRING BOARD, RIGID FLEX OR FLEXIBLE, MULTILAYER, WITH PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING |
| MIL-PRF-31032-6 Revision B:2017 | PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE SIDED, THERMOPLASTIC RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| IPC 2152 : 0 | STANDARD FOR DETERMINING CURRENT CARRYING CAPACITY IN PRINTED BOARD DESIGN |
| MIL-PRF-31032-3 Revision C:2017 | PRINTED WIRING BOARD, FLEXIBLE, SINGLE AND DOUBLE LAYER, WITH OR WITHOUT PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING |
| IPC SM 840 : E | QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
| IPC 2223 GERMAN : C | SECTIONAL DESIGN STANDARD FOR FLEXIBLE PRINTED BOARDS |
| IPC HDBK 830 : A | GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS |
| MIL-PRF-31032-5 Revision B:2017 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS |
| IPC J STD 001 HUNGARIAN : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 GERMAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC SM 840 CHINESE : E | QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
| IPC 4553 CHINESE : A | SPECIFICATION FOR IMMERSION SILVER PLATING FOR PRINTED BOARDS |
| IPC 6013 GERMAN : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS |
| IPC HDBK 840 : 0 | SOLDER MASK HANDBOOK |
| IPC 6012 FRENCH : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
| IPC 2582 : 2007 | SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF ADMINISTRATIVE METHODS FOR MANUFACTURING DATA DESCRIPTION |
| MIL-PRF-3098 Revision L:2017 | CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| IPC PWB-CRT-SG : A2007 | PCB DESIGNERS CERTIFICATION STUDY GUIDE |
| IPC 7351 GERMAN : B | Basic requirements for SMT design and SMD patch guideline |
| IPC 2614 : 0 | SECTIONAL REQUIREMENTS FOR BOARD FABRICATION DOCUMENTATION |
| IPC 4556 : 0 | SPECIFICATION FOR ELECTROLESS NICKEL/ELECTROLESS PALLADIUM/IMMERSION GOLD (ENEPIG) PLATING FOR PRINTED CIRCUIT BOARDS |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| IPC J STD 001 ROMANIAN : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| IPC J STD 001 DANISH : E | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC D 422 : 0 | DESIGN GUIDE FOR PRESS FIT RIGID PRINTED BOARD BACK PLANES |
| IPC 6018 CHINESE : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR HIGH FREQUENCY (MICROWAVE) PRINTED BOARD |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| IPC 7095 : C | DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR BGAS |
| I.S. EN 61189-3-719:2016 | TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3-719: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) - MONITORING OF SINGLE PLATED-THROUGH HOLE (PTH) RESISTANCE CHANGE DURING TEMPERATURE CYCLING |
| PD IEC/TS 62647-1:2012 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Preparation for a lead-free control plan |
| IPC 7351 : B | GENERIC REQUIREMENTS FOR SURFACE MOUNT DESIGN AND LAND PATTERN STANDARD |
| 13/30295427 DC : 0 | BS IEC/PAS 61249-8-5 ED.1 - QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
| I.S. EN 50155:2017-11 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT |
| IPC J STD 001 CHINESE : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC 2222 : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| IPC J STD 001 SPANISH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC J STD 001 FRENCH : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| MIL-DTL-22442 Revision G:2009 | CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR |
| IEEE 1725-2011 | IEEE Standard for Rechargeable Batteries for Cellular Telephones |
| MIL-DTL-21097-15 Revision G:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING: 0.200, ALTERNATE DUAL ROW, TYPE CS, BLADE CONTACT (NO MOUNTING PROVISION) |
| GEIA HB 0005-2 : 2007 | TECHNICAL GUIDELINES FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| MIL-DTL-39024 Revision C:2014 | JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR |
| NASA MSFC STD 3425 : 2006 | MULTIPROGRAM/PROJECT COMMON-USE DOCUMENT DESIGN STANDARD FOR RIGID PRINTED CIRCUIT BOARDS AND ASSEMBLIES |
| NASA MSFC STD 2907 : 2006 | WORKMANSHIP STANDARD FOR PRINTED WIRING BOARDS |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| GEIA STD 0005-1 : 2012 | PERFORMANCE STANDARD FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| CSA N290.14 : 2015 | QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS |
| NASA JSC 27301 : 2009 | MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE |
| IPC 4554 : 0 | SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS |
| IEC TS 62647-1:2012 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Preparation for a lead-free control plan |
| MIL-DTL-55302 Revision G:2009 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
| MIL-DTL-21097-14 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING: 0.200, ALTERNATE DUAL ROW, TYPE CS, BLADE CONTACT (MOUNTING PROVISION A) |
| MIL-DTL-21097-3 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, ADAPTER, CONTACT SPACING (.200) INDIVIDUAL CONTACTS, TYPE CS |
| DSCC 11002 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 2 (DOUBLE-SIDED) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER |
| DSCC 11003 : 0 | PRINTED WIRING BOARD, FLEXIBLE, TYPE 3 (MULTILAYER) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER |
| IEC PAS 61249-8-5:2014 | Qualification and performance specification of permanent solder mask and flexible cover materials |
| IEC PAS 62647-1:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Lead-free management |
| IEC 61182-2-2:2012 | Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description |
| PD IEC/PAS 62647-1:2011 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Lead-free management |
| IEC TS 62647-22:2013 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines |
| IEC PAS 62647-22:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines |
| IEC 61189-3-719:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during temperature cycling |
| IEC PAS 62293:2001 | Qualification and performance specification for high density interconnect (HDI) layers or boards (IPC 6016) |
| IEC PAS 62249:2001 | Qualification and performance specification for flexible printed boards |
| BS EN 140402-801:2015 | Detail specification: Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2 |
| BS EN 16602-70-12:2016 | Space product assurance. Design rules for printed circuit boards |
| PD IEC/PAS 61249-8-5:2014 | Qualification and performance specification of permanent solder mask and flexible cover materials |
| EN 16602-70-12:2016 | Space product assurance - Design rules for printed circuit boards |
| BS EN 61189-3-719:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards). Monitoring of single plated-through hole (PTH) resistance change during temperature cycling |
| IPC 1902 : 1998 | GRID SYSTEMS FOR PRINTED CIRCUITS |
| PD IEC/TS 62647-22:2013 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Technical guidelines |
| EN 61189-3-719:2016 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during temperature cycling |
| IPC 2220 : LATEST | IPC 2220 FAMILY OF DESIGN DOCUMENTS |
| DSCC 10012 : 0 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, GENERAL DRAWING |
| ASME Y14.24 : 2012 | TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| DSCC 10013 : 0 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, TYPE 3 WITH PLATED-THROUGH HOLES |
| DSCC 11006 : 0 | PRINTED WIRING BOARD, FLEXIBLE RIGID FLEX, GENERAL DRAWING |
| IPC 6013 CHINESE : B | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS |
| DSCC 10014:2012 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, TYPE 4 WITH BLIND AND BURIED VIAS |
| ASME Y14.31 : 2014 | UNDIMENSIONED DRAWINGS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| SAE AIR7374:2024 | Aging Mechanisms of Electrical Insulation Materials in a High Energy System |
| IPC T 50 : M | TERMS AND DEFINITIONS FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS |
| IPC SM 780 : 0 | COMPONENT PACKAGING AND INTERCONNECTING WITH EMPHASIS ON SURFACE MOUNTING |
| IPC 4552 : 0 | PERFORMANCE SPECIFICATION FOR ELECTROLESS NICKEL/IMMERSION GOLD (ENIG) PLATING FOR PRINTED BOARDS |
| IPC 6011 : 0 | GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS |
| IPC 4553 : A | SPECIFICATION FOR IMMERSION SILVER PLATING FOR PRINTED BOARDS |
| IPC TR 001 : 1989 | AN INTRODUCTION TO TAPE AUTOMATED BONDING FINE PITCH TECHNOLOGY |
| IPC 4202 : A | FLEXIBLE BASE DIELECTRICS FOR USE IN FLEXIBLE PRINTED BOARDS |
| IPC D 356 : B | BARE SUBSTRATE ELECTRICAL TEST DATA FORMAT |
| IPC 4761 : 0 | DESIGN GUIDE FOR PROTECTION OF PRINTED BOARD VIA STRUCTURES |
| IPC 9252 : A | REQUIREMENTS FOR ELECTRICAL TESTING OF UNPOPULATED PRINTED BOARDS |
| IPC 2611 : 0 | GENERIC REQUIREMENTS FOR ELECTRONIC PRODUCT DOCUMENTATION |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC JP002 : 0 | JEDEC/IPC CURRENT TIN WHISKERS THEORY AND MITIGATION PRACTICES GUIDELINE |
| IPC CC 830 : B | QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
| IPC 4203 : A | COVER AND BONDING MATERIAL FOR FLEXIBLE PRINTED CIRCUITRY |
| IPC D 422 : 0 | DESIGN GUIDE FOR PRESS FIT RIGID PRINTED BOARD BACK PLANES |
| IPC 4563 : 0 | RESIN COATED COPPER FOIL FOR PRINTED BOARDS GUIDELINE |
| IPC 2141 : A | DESIGN GUIDE FOR HIGH-SPEED CONTROLLED IMPEDANCE CIRCUIT BOARDS |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC TM 650 : 0 | TEST METHODS MANUAL |
| IPC 2251 : 0 | DESIGN GUIDE FOR THE PACKAGING OF HIGH SPEED ELECTRONIC CIRCUITS |
| IPC 9631 : 0 | USER GUIDE FOR IPC-TM-650 - METHOD 2.6.27: THERMAL STRESS, CONVECTION REFLOW ASSEMBLY SIMULATION |
| IPC CM 770 : E | COMPONENT MOUNTING GUIDELINES FOR PRINTED BOARDS |
| IPC D 322 : 0 | GUIDELINES FOR SELECTING PRINTED WIRING BOARD SIZES USING STANDARD PANEL SIZES |
| IPC 4101 : D | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| IPC 7351 : B | GENERIC REQUIREMENTS FOR SURFACE MOUNT DESIGN AND LAND PATTERN STANDARD |
| IPC 2615 : 0 | PRINTED BOARD DIMENSIONS AND TOLERANCES |
| IPC J STD 005 : A | REQUIREMENTS FOR SOLDERING PASTES |
| IPC 2511 : B | GENERIC REQUIREMENTS FOR IMPLEMENTATION OF PRODUCT MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY |
| IPC MC 790 : 0 | GUIDELINES FOR MULTICHIP MODULE TECHNOLOGY UTILIZATION |
| IPC 7094 : 0 | DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR FLIP CHIP AND DIE SIZE COMPONENTS |
| IPC 1601 : 0 | PRINTED BOARD HANDLING AND STORAGE GUIDELINES |
| SAE AMS QQ A 250 B : 2012 | ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR |
| IPC D 279 : 0 | DESIGN GUIDELINES FOR RELIABLE SURFACE MOUNT TECHNOLOGY PRINTED BOARD ASSEMBLIES |
| IPC 7525 : B | STENCIL DESIGN GUIDELINES |
| IPC 9701 : A | PERFORMANCE TEST METHODS AND QUALIFICATION REQUIREMENTS FOR SURFACE MOUNT SOLDER ATTACHMENTS |
| IPC 4204 : A | FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY |
| IPC 4562 : A | METAL FOIL FOR PRINTED BOARD APPLICATIONS |
| IPC HDBK 840 : 0 | SOLDER MASK HANDBOOK |
| IPC J STD 003 : C | SOLDERABILITY TESTS FOR PRINTED BOARDS |
| IPC 4554 : 0 | SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS |
| IPC CF 152 : B | COMPOSITE METALLIC MATERIAL SPECIFICATION FOR PRINTED WIRING BOARDS |
| IEEE 1149.1-2013 REDLINE | IEEE Standard for Test Access Port and Boundary-Scan Architecture |
| IPC A 47 : 1996 | COMPOSITE TEST PATTERN TEN-LAYER PHOTOTOOL |
| IPC A 43 : 1995 | TEN-LAYER MULTILAYER ARTWORK |
| IPC 7095 : C | DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR BGAS |
| IPC SM 785 : 0 | GUIDELINES FOR ACCELERATED RELIABILITY TESTING OF SURFACE MOUNT ATTACHMENTS |
| IPC 4103 : A | SPECIFICATION FOR BASE MATERIALS FOR HIGH SPEED/HIGH FREQUENCY APPLICATIONS |
| IPC 2316 : 0 | DESIGN GUIDE FOR EMBEDDED PASSIVE DEVICE PRINTED BOARDS |
| IPC 6012 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.