IEEE DRAFT 802.3Z : D4.2 MAR 98
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SUPPLEMENT TO CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS: MEDIA ACCESS CONTROL (MAC) PARAMETERS, PHYSICAL LAYER, REPEATER AND MANAGEMENT PARAMETERS FOR 1000 MB/S OPERATION
10-01-1998
01-12-2013
Clause 01 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 01
Clause 02 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 02
Clause 03 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 03
Clause 04 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 04
Clause 05 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 05
Clause 06 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 06
Clause 22 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 22
Clause 30 Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Clause 30
Annex 30A Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Annex 30A
Clause 30B Changes to ANSI/IEEE Std 802.3, 1996,
and its approved supplements, Annex 30B
Clause 34 Introduction to 1000 Mb/s baseband networks
Clause 35 Reconciliation Sublayer (RS) and Gigabit Media
Independent Interface (GMII)
Clause 36 Physical Coding Sublayer (PCS) and Physical
Medium Attachment (PMA) sublayer,
type 1000BASE-X
Annex 36A (informative) Random jitter test patterns
Clause 37 Link_Configuration for 1000BASE-X
Clause 38 Physical Medium Dependent (PMD) sublayer and
baseband medium, type 1000BASE-LX (Long
Wavelength Laser) and 1000BASE-SX (Short
Wavelength Laser)
Annex 38A (informative) Optical Physical Media Dependent
Link Mode
Annex 38B (informative) Effective modal bandwidth v
link length
Annex 38C (informative) Total jitter measurement using
a digital oscilloscope
Annes 38D (informative) Selections from Fibre Channel
(FC-PH) Annex A (informative) Test Methods
Clause 39 Physical Medium Dependent (PMD) sublayer and
baseband medium, type 1000BASE-CX
Clause 40 Clause number reserved for future
1000BASE-T UTP PHY
Clause 41 Repeater for 1000 Mb/s baseband networks
Clause 42 System considerations for multi-segment
1000 Mb/s baseband networks
| DocumentType |
Draft
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy |
| IEC 60807-3:1990 | Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction |
| IEC 61196-1:2005 | Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
| IEC 61754-4:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.