IEEE C57.96-2013
Current
Current
The latest, up-to-date edition.
IEEE Guide for Loading Dry-Type Distribution and Power Transformers
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-27-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Overview
2 Normative references
3 Definitions
4 Overview
5 Loading equations
6 Loading based on life expectancy
Annex A (informative) - Bibliography
Annex B (informative) - Computer programs
Annex C (informative) - Example calculations
This guide covers general recommendations for the loading of dry-type distribution and power transformers installed in ventilated, non-ventilated, and sealed type enclosures.
| Committee |
Transformers
|
| DevelopmentNote |
Supersedes IEEE DRAFT C57.96. (11/2004)
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-8831-7
|
| Pages |
46
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| Supersedes |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
| IEEE 1653.3-2012 | IEEE Guide for Rail Transit Traction Power Systems Modeling |
| IEEE C57.32-2015 | IEEE Standard for Requirements, Terminology, and Test Procedures for Neutral Grounding Devices |
| BS EN 62040-3:2011 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
| IEEE DRAFT C57.12.91 : D3 2000 | DRAFT STANDARD TEST CODE FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS |
| IEEE 1566-2015 | IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger |
| TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
| CSA C802.5 : 2016 | GUIDELINE FOR EVALUATING THE EFFICIENCY OF DRY-TYPE TRANSFORMERS UNDER NON-LINEAR LOADING |
| I.S. EN 62040-3:2011 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| NEMA ST 20:2014 | Dry Type Transformers for General Applications |
| NEMA TR1 : 2013 | TRANSFORMERS, STEP VOLTAGE REGULATORS AND REACTORS |
| CEI EN 62040-3 : 2015 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| IEEE C57.12.01-2015 REDLINE | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
| UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
| 14/30297921 DC : 0 | BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS |
| IEEE 638-2013 | IEEE Standard for Qualification of Class 1E Transformers for Nuclear Power Generating Stations |
| IEEE DRAFT C57.18.10 : D12 APR 97 | DRAFT PRACTICES AND REQUIREMENTS FOR SEMICONDUCTOR POWER RECTIFIER TRANSFORMER |
| EN 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE 1818-2017 | IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations |
| IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
| CSA C802.4 : 2013 | GUIDE FOR KVA SIZING OF DRY-TYPE TRANSFORMERS, 1.2 KV CLASS, SINGLE-PHASE AND THREE-PHASE |
| IEEE DRAFT C57.12.01 : D6 2005 | GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS INCLUDING THOSE WITH SOLID-CAST AND/OR RESIN ENCAPSULATED WINDINGS |
| IEEE C57.159-2016 | IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems |
| IEEE C57.12.59-2015 | IEEE Guide for Dry-Type Transformer Through-Fault Current Duration |
| IEEE C37.121-2012 | GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS |
| IEEE C57.12.52-2012 | IEEE Standard for Sealed Dry-Type Power Transformers, 501 kVA and Higher, Three-Phase, with High-Voltage 601 to 34500 Volts, Low-Voltage 208Y/120 to 4160 Volts—General Requirements |
| IEEE C57.12.91-2011 | IEEE Standard Test Code for Dry-Type Distribution and Power Transformers |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| IEEE 1653.1-2016 | IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output |
| C9-17 | Dry-type transformers |
| IEEE C37.121-2012 REDLINE | IEEE Guide for Switchgear - Unit Substation - Requirements |
| IEEE C57.94-2015 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type Distribution and Power Transformers |
| IEEE C57.12.01-2020 | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
| IEEE C57.12.91-2020 | IEEE Standard Test Code for Dry-Type Distribution and Power Transformers |
| IEEE C57.12.60-2020 | IEEE Standard for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers |
| IEEE/IEC 60076-16-2018 | IEC/IEEE International Standard - Power transformers - Part 16: Transformers for wind turbine applications |
| IEEE C57.12.59-2015 | IEEE Guide for Dry-Type Transformer Through-Fault Current Duration |
| IEEE C57.12.01-2015 REDLINE | IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers |
| IEEE C57.134-2013 | IEEE Guide for Determination of Hottest-Spot Temperature in Dry-Type Transformers |
| IEEE C57.12.60-2009 REDLINE | IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry-Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast, and Resin-Encapsulated Transformers |
| IEEE C57.12.01-2005 | IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid Cast and/or Resin Encapsulated Windings |
| IEC 60076-12:2008 | Power transformers - Part 12: Loading guide for dry-type power transformers |
| IEEE C57.138-1998 | IEEE Recommended Practice for Routine Impulse Test for Distribution Transformers |
| IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
| IEEE C57.12.56-1986 | IEEE Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers |
| IEEE C57.110-2008 REDLINE | IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.