IEEE C57.129-2007 REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
11-09-2017
English
01-29-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Definitions and letter symbols
3.1 Definitions
3.2 Letter symbols
4 General requirements-Systems and environmental data
4.1 Usual service conditions
4.2 Loading at other than rated conditions
4.3 Unusual service conditions
4.4 Environmental impact
4.5 Synthetic materials
4.6 Transformer oil
5 Rating data
5.1 Cooling classes of converter transformers
5.2 Frequency
5.3 Phases
5.4 Rated kilovolt-amperes
5.5 Rated current
5.6 Voltage ratings and taps for converter transformers
5.7 Connections
5.8 Polarity, angular displacement, and terminal markings
for converter transformers
5.9 Impedance
5.10 Total losses
5.11 Insulation levels
5.12 Temperature rise and loading conditions
5.13 Loss capitalization rates
5.14 Sound level limits
5.15 Auxiliary power supply voltage
5.16 On-load tap changers
6 Construction
6.1 General
6.2 Tank and component design
6.3 Oil preservation
6.4 Auxiliary equipment
6.5 Electrical connections
6.6 Nameplate
7 Tests
7.1 General
7.2 Routine, design, and other tests
7.3 Additional routine tests for converter transformers
with load tap changing or regulating transformers
8 Test code
8.1 General
8.2 Resistance measurements
8.3 Polarity and phase-relation tests
8.4 Ratio tests
8.5 No-load losses and excitation current
8.6 Impedance and load losses
8.7 Dielectric tests
8.8 Temperature rise
8.9 Short-circuit test
8.10 Audible sound test
8.11 Gas detector system operating test
9 Tolerances
9.1 Tolerance on ratio
9.2 Tolerance on impedance
9.3 Tolerance on losses
Annex A (informative) - Determination of loss adjustment factors
Annex B (informative) - Laboratory power testing concepts and
methodologies under consideration
Annex C (informative) - In-service overloading of HVDC converter
transformers
Annex D (informative) - HVDC converter transformers for use
with voltage source converters
Annex E (informative) - Design review
Annex F (informative) - Bibliography
Covers the electrical, mechanical, and physical requirements of oil-immersed single-phase and three-phase converter transformers.
| Committee |
Transformers
|
| DevelopmentNote |
Supersedes IEEE DRAFT C57.129 (06/2000)
|
| DocumentType |
Standard
|
| ISBN |
978-0-7381-5719-1
|
| Pages |
64
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE C57.154-2012 | IEEE Standard for the Design, Testing, and Application of Liquid-Immersed Distribution, Power, and Regulating Transformers Using High-Temperature Insulation Systems and Operating at Elevated Temperatures |
| IEEE C57.159-2016 | IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems |
| C88-16 | Power transformers and reactors |
| IEEE C57.154-2022 REDLINE | IEEE Standard for Liquid-Immersed Transformers Designed to Operate at Temperatures Above Conventional Limits Using High- Temperature Insulation Systems |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEEE C57.12.10-2010 | TRANSFORMERS - 230 KV AND BELOW 833/958 THROUGH 8333/10 417 KVA, SINGLE-PHASE, AND 750/862 THROUGH 60 000/80 000/100 000 KVA, THREE-PHASE WITHOUT LOAD TAP CHANGING; AND 3750/4687 THROUGH 60 000/80 000/100 000 KVA WITH LOAD TAP CHANGING - SAFETY REQUIREMENT |
| IEEE 32-1972 | IEEE Standard Requirements, Terminology, and Test Procedures for Neutral Grounding Devices |
| IEEE C57.19.03-1996 | IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications |
| IEEE C62.2-1987 | IEEE Guide for the Application of Gapped Silicon-Carbide Surge Arresters for Alternating Current Systems |
| IEEE C62.22-1997 | IEEE Guide for Application of Metal-Oxide Surge Arresters for Alternating-Current Systems |
| IEEE C57.19.01-2000 | IEEE Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| ASTM D 1275 : 2015 | Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
| IEEE C62.1-1989 | IEEE Standard for Gapped Silicon-Carbide Surge Arresters for AC Power Circuits |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| IEEE 315 : 1975 | GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS) |
| IEEE C62.11-2005 | IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV) |
| IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| IEEE C57.98-2011 | IEEE Guide for Transformer Impulse Tests |
| IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| IEEE 80-2013 REDLINE | IEEE Guide for Safety in AC Substation Grounding |
| ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
| IEEE C57.113-1991 | IEEE Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors |
| IEEE C57.92-1981 | IEEE Guide for Loading Mineral-Oil-Immersed Power Transformers Up to and Including 100 MVA with 55 C or 65 C Average Winding Rise |
| IEEE C57.19.0:2005 | STANDARD REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR BUSHINGS FOR DC APPLICATIONS |
| IEEE C57.109-1993 | IEEE Guide for Liquid-Immersed Transformers Through-Fault-Current Duration |
| IEEE C57.12.80-2002 | IEEE Standard Terminology for Power and Distribution Transformers |
| IEC 61378-2:2001 | Convertor transformers - Part 2: Transformers for HVDC applications |
| IEEE C57.12.00-2006 | IEEE Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEC 61378-3:2015 | Converter transformers - Part 3: Application guide |
| IEEE C57.12.90-2006 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.12.70-2011 | IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers |
| ANSI C92.1 : 1982 | POWER SYSTEMS - INSULATION COORDINATION |
| ANSI C92.2 : 1987 | POWER-SYSTEMS-ALTERNATING-CURRENT ELECTRICAL SYSTEMS AND EQUIPMENT OPERATING AT VOLTAGES ABOVE 230 KILOVOLTS NOMINAL-PREFERRED VOLTAGE RATING, |
| IEEE C57.12.12 : 1980 | GUIDE FOR INSTALLATION OF OIL-IMMERSED EHV TRANSFORMERS 345 KV AND ABOVE. |
| IEEE C57.106-2006 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
| IEEE C57.110-2008 REDLINE | IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents |
| IEEE C57.12.11-1980 | IEEE Guide for Installation of Oil-Immersed Transformers (10 MVA and Larger, 69-287 kV Rating) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.