IEEE C37.92-2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Standard for Analog Inputs to Protective Relays From Electronic Voltage and Current Transducers
04-25-2023
English
09-20-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Overview
1.1 Scope
1.2 Purpose
2 Normative references
3 Definitions
4 General requirements
4.1 Terminations
4.2 Signal isolation from ground
4.3 Polarity marking and reversibility
4.4 Auxiliary outputs from sensing systems
4.5 Electrical environment withstand capability
5 Electrical requirements
5.1 Signal specifications
5.2 Phase correction value
5.3 Output burden capability
5.4 Common-mode rejection
5.5 Output dc offset
5.6 Bandwidth and transient response
5.7 Squelching on error detection
5.8 Signal description for valid-data signal
6 Intermediate devices
6.1 Purpose
6.2 Performance requirements
6.3 Other requirements
7 Interconnection wiring practices
Annex A (informative)
Describes the interface between voltage or current transducer systems or sensing systems with analog electronic outputs, and suitably designed protective relays or other substation measuring equipment.
| Committee |
Power System Relaying and Control
|
| DevelopmentNote |
Supersedes IEEE DRAFT C37.92. (09/2005)
|
| DocumentType |
Standard
|
| ISBN |
0-7381-4697-8
|
| Pages |
30
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy |
| CSA C60044-5:2007 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| CSA C60044-5 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 5: CAPACITOR VOLTAGE TRANSFORMERS |
| IEEE C37.241-2017 | IEEE Guide for Application of Optical Instrument Transformers for Protective Relaying |
| I.S. EN 61869-6:2016 | INSTRUMENT TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW-POWER INSTRUMENT TRANSFORMERS |
| EN 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| CSA C61869-5 : 2015 | INSTRUMENT TRANSFORMERS - PART 5: ADDITIONAL REQUIREMENTS FOR CAPACITOR VOLTAGE TRANSFORMERS |
| IEEE C57.13.3-2014 | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
| IEEE C57.13.1-2006 REDLINE | IEEE Guide for Field Testing of Relaying Current Transformers |
| CSA C60044-2 : 2007 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
| CSA C60044-2 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
| 13/30267601 DC : 0 | BS EN 61869-6 - INSTRUMENTS TRANSFORMERS - PART 6: ADDITIONAL GENERAL REQUIREMENTS FOR LOW POWER INSTRUMENT TRANSFORMERS |
| CSA C60044-7 : 2007 : R2016 | INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
| CSA C60044-7 : 2007 : R2011 | INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
| CSA C60044-7 : 2007 | INSTRUMENT TRANSFORMERS - PART 7: ELECTRONIC VOLTAGE TRANSFORMERS |
| IEEE C37.233 : 2009 | GUIDE FOR POWER SYSTEM PROTECTION TESTING |
| IEEE DRAFT C57.13-1 : D8.0 2006 | FIELD TESTING OF RELAYING CURRENT TRANSFORMERS |
| BS EN 61869-6:2016 | Instrument transformers Additional general requirements for low-power instrument transformers |
| IEC 61869-6:2016 | Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers |
| IEEE C37.235-2007 | IEEE Guide for the Application of Rogowski Coils Used for Protective Relaying Purposes |
| IEEE 1601-2010 | IEEE Trial-Use Standard for Optical AC Current and Voltage Sensing Systems |
| IEEE C37.48-2005 | IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| IEEE C57.13.3-2005 | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
| IEEE C37.90.1-2002 | IEEE Standard Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE C37.90-2005 | IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| IEEE 1050-2004 | IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations |
| IEEE 525-1992 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| IEEE C37.90.2:2004 | WITHSTAND CAPABILITY OF RELAY SYSTEMS TO RADIATED ELECTROMAGNETIC INTERFERENCE FROM TRANSCEIVERS |
| IEEE C37.90.1-2012 | IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
| IEEE C57.13-1993 | IEEE Standard Requirements for Instrument Transformers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.