IEEE C2-2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
NATIONAL ELECTRICAL SAFETY CODE (NESC)(R)
Superseded date
08-01-2022
Superseded by
Published date
08-01-2016
Sorry this product is not available in your region.
The NESC covers:1. Supply and communication facilities (including metering) and associated work practicesemployed by a public or private electric supply, communications, railway, trolley, street andarea lighting, traffic signal (or other signal), irrigation district or other community ownedutility, or a similar utility in the exercise of its function as a utility.2.
| DevelopmentNote |
Also available with IEEE C2 HANDBOOK, see IEEE C2 SET. (07/2012)
|
| DocumentType |
Standard
|
| ProductNote |
Also available with IEEE C2 HANDBOOK, see IEEE C2 SET. (Mkj 07/2012)
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy |
| IEEE 1727-2013 | IEEE Guide for Working Procedures on Underground Transmission Circuits with Induced Voltage |
| IEEE C57.94-1982 | IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers |
| IEEE C57.12.29-2014 | IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity for Coastal Environments |
| IEEE 1264-2015 | IEEE Guide for Animal Deterrents for Electric Power Supply Substations |
| IEEE 487.3-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities |
| FC 4-610-04F : 2015 | FACILITIES CRITERIA - AIR FORCE LEGAL FACILITIES |
| UFC 4-022-03 : 2013 | UNIFIED FACILITIES CRITERIA - SECURITY FENCES AND GATES |
| IEEE 1793:2012 | GUIDE FOR PLANNING AND DESIGNING TRANSITION FACILITIES BETWEEN OVERHEAD AND UNDERGROUND TRANSMISSION LINES |
| IEEE 3007.1 : 2010 | RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS |
| UFC 3-501-01 : 2015 | UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING |
| MIL-HDBK-705 Revision C:1987 | GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS |
| IEEE DRAFT C37.95 : D6 99 | DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS |
| FIPS PUB 94 : 0 | GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS |
| IEEE C57.147-2008 | IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers |
| NACE 42102 : 0 | CORROSION IN POWER AND COMMUNICATION MANHOLES |
| IEEE DRAFT 1036 : D13A 2006 | APPLICATION OF SHUNT POWER CAPACITORS |
| IEEE 487.1-2014 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of On-Grid Isolation Equipment |
| ANSI B77.2 : 2014 | FUNICULARS - SAFETY REQUIREMENTS |
| IEEE DRAFT 1050 : 0 | INSTRUMENTATION AND CONTROL EQUIPMENT GROUNDING IN GENERATING STATIONS |
| IEEE DRAFT 1127 : D7 DEC 96 | DRAFT GUIDE FOR THE DESIGN, CONSTRUCTION, AND OPERATION OF ELECTRIC POWER SUBSTATIONS FOR COMMUNITY ACCEPTANCE AND ENVIRONMENTAL COMPATIBILITY |
| IEEE C37.30-2:2015 | GUIDE FOR WIND-LOADING EVALUATION OF HIGH-VOLTAGE (>1000 V) AIR-BREAK SWITCHES |
| ASTM D 1050 : 2005 : R2011 | Standard Specification for Rubber Insulating Line Hose |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| ASTM D 1050 : 2005 : R2017 | Standard Specification for Rubber Insulating Line Hose |
| ASTM F 1916 : 1998 | Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications (Withdrawn 2008) |
| NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 730 : 2018 | GUIDE FOR PREMISES SECURITY |
| NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| NFPA 1221 : 2016 | INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS |
| IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
| IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
| UFC 3-540-08 : 2017 | UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| FC 4-211-03F : 2016 | FACILITIES CRITERIA - AIR FORCE FIGHTER ENGINE MAINTENANCE FACILITY |
| UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
| ANS 57.7-1988(R1997) | DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE) |
| FC 4-721-02F : 2015 | FACILITIES CRITERIA - AIR FORCE LEVEL 1 CONFINEMENT FACILITY |
| TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
| PIP ELCGL01:2023 | Electrical Design Criteria |
| IPC 1331 : 0 | VOLUNTARY SAFETY STANDARD FOR ELECTRICALLY HEATED PROCESS EQUIPMENT |
| MIL-HDBK-1004-6 Base Document:1986 | LIGHTNING PROTECTION |
| NFPA 70B:2023 | Standard for Electrical Equipment Maintenance |
| NFPA 2:2023 | Hydrogen Technologies Code |
| ANSI O2.1 : 1983 | SAWMILLS - SAFETY REQUIREMENTS FOR |
| NACE RP 01 77 : 0 | MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS |
| IEEE DRAFT 1048 : D8 99 | DRAFT GUIDE FOR PROTECTIVE GROUNDING OF POWER LINES |
| MIL-STD-705 Revision D:2016 | MOBILE ELECTRIC POWER SYSTEMS |
| A-A-59916 Revision A:2017 | Power Supply, Direct Current, Portable 28.5 Volts Direct Current, 600 Amperes |
| IEEE DRAFT 1307 : D8B 96 | ANSI/IEEE DRAFT TRIAL GUIDE FOR FALL PROTECTION FOR THE USE UTILITY INDUSTRY |
| UFC 3-560-01 : Change 1 | UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY |
| CSA C22.3 No. 1 : 2010 : INC : UPD 1 : 2011 : R2015 | OVERHEAD SYSTEMS |
| NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| IEEE 1031-2011 | IEEE Guide for the Functional Specification of Transmission Static Var Compensators |
| IEEE C57.13.3-2014 | IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases |
| CSA T568.2 : 2005 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS |
| AWS WHC2.15 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 15: ARC CUTTING AND GOUGING |
| IEEE 3001.8-2013 | IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems |
| IEEE C37.30.2-2015 | IEEE Guide for Wind-Loading Evaluation of High-Voltage (>1000 V) Air-Break Switches |
| IEEE DRAFT 80 : D14 JUN 99 | DRAFT GUIDE FOR SAFETY IN AC SUBSTATION GROUNDING |
| IEEE DRAFT C57.13.3 : D9 2005 | GUIDE FOR GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES |
| ANSI B157.1 : 1981 | SCALES, WEIGHING DEVICES, AND WEIGHING SYSTEMS, SAFETY REQUIREMENTS FOR, |
| NETA ATS : 2017 | ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
| IEEE DRAFT C37.108 : D6 98 | DRAFT GUIDE FOR THE PROTECTION OF NETWORK TRANSFORMERS |
| IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
| API 500 RUSSIAN :1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 500 RUSSIAN : 1997 : R2002 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| IEEE 3004.5-2014 | IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems |
| NEMA SG 10 : 2013 | GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V |
| ANSI C57.12.29 : 2014 | SWITCHGEAR AND TRANSFORMERS - PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY FOR COASTAL ENVIRONMENTS |
| NEMA ST 20:2014 | Dry Type Transformers for General Applications |
| NEMA ICS 3.1 : 2009(R2014) | GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| UFC 3-530-01 : Change 3 | UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS |
| NEMA SG 6:2000 | POWER SWITCHING EQUIPMENT |
| NEMA SG 11 : 2013 | GUIDE FOR HANDLING AND MAINTENANCE OF ALTERNATING CURRENT OUTDOOR HIGH-VOLTAGE CIRCUIT BREAKERS |
| FC 4-179-03F : 2015 | FACILITIES CRITERIA - AIR FORCE INDOOR SMALL ARMS FIRING RANGE |
| NEMA SG 4:2009(R2013) | ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS |
| NEMA CC1 : 2009(R2015) | ELECTRIC POWER CONNECTORS FOR SUBSTATIONS |
| IEEE DRAFT 1215 : D13 2001 | DRAFT GUIDE FOR THE APPLICATION OF SEPARABLE INSULATED CONNECTORS |
| IEEE 1222-2011 | IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines |
| UFC 3-550-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION |
| ISA RP60.4 : 1990 | DOCUMENTATION FOR CONTROL CENTERS |
| IEEE 487.2-2013 | IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems |
| IEEE DRAFT 1402 : D8 APR 97 | GUIDE FOR ELECTRIC POWER SUBSTATION PHYSICAL AND ELECTRONIC SECURITY |
| IEEE 1630-2012 | IEEE Standard for Supporting Structures for Overhead Contact Systems for Transit Systems |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| A-A-59880 Revision A:2017 | LOAD BANK, ELECTRICAL, 160 KILOWATTS, 60 HERTZ |
| IEEE DRAFT 605 : APR 97 | DRAFT STANDARD GUIDE FOR DESIGN OF SUBSTATION RIGID-BUS STRUCTURES |
| IEEE DRAFT C37.91 : D7.0 2006 | PROTECTING POWER TRANSFORMERS |
| IEEE 1862-2014 | IEEE Recommended Practice for Overvoltage and Insulation Coordination of Transmission Systems at 1000 kV AC and Above |
| CSA C22.4 No. 1 : 2009(R2018) | OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE |
| CSA T568.3 : 2005 | OPTICAL FIBER CABLING COMPONENTS STANDARD |
| IEEE DRAFT C57.12.29 : D1.5 2004 | PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY FOR COASTAL ENVIRONMENTS |
| MIL-STD-188-154 Revision A:1997 | SUBSYSTEM, EQUIPMENT, AND INTERFACE STANDARDS FOR COMMON LONG HAUL AND TACTICAL TELECOMMUNICATIONS CONTROL FACILITIES |
| CSA T568.1 : 2005 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS |
| BS IEC 60076-21:2011 | Power transformers Standard requirements, terminology, and test code for step-voltage regulators |
| ATIS T1.605 : 91(R1999) | ISDN BASIC ACCESS INTERFACE FOR S AND T REFERENCE POINTS AND LAYER 1 SPECIFICATION |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| IEEE 1635-2012 | IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications |
| IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
| NASA SSTD 8070 0083 : 2011 | STANDARD FOR THE 13.8KV DISTRIBUTION SYSTEM |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| NASA KSC SPEC E 0017 : 1996 | ELECTRICAL POWER CABLE, INSTALLATION OF, SPECIFICATION FOR |
| ASHRAE GUIDELINE 21 : 2012 | VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
| CSA C22.3 No. 1 : 2015(R2020) | OVERHEAD SYSTEMS |
| NASA SSTD 8070 0081 : 2001 | FACILITY ELECTRICAL STANDARD |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| IES G 1 : 2003 | GUIDE FOR SECURITY LIGHTING FOR PEOPLE, PROPERTY, AND CRITICAL INFRASTRUCTURE |
| CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
| ANSI B77.1 : 2017 | PASSENGER ROPEWAYS - AERIAL TRAMWAYS, AERIAL LIFTS, SURFACE LIFTS, TOWS AND CONVEYORS - SAFETY STANDARD |
| IEEE C37.38-1989 | IEEE Standard for Gas Insulated, Metal-Enclosed Disconnecting, Interrupter, and Grounding Switches |
| CSA C22.4 PACKAGE : 2009 | CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS |
| IEEE/IEC C37.60-2012 | IEEE/IEC International Standard - High-voltage switchgear and controlgear - Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV |
| IEEE C57.16-2011 | IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors |
| IEEE 1909.1-2014 | IEEE Recommended Practice for Smart Grid Communications Equipment -- Test Methods and Installation Requirements |
| ANSI C57.12.28 : 2014 | PAD-MOUNTED EQUIPMENT - ENCLOSURE INTEGRITY |
| IEEE DRAFT 1313.2 : D6 DEC 98 | DRAFT GUIDE FOR THE APPLICATION OF INSULATED COORDINATION |
| ANSI B24.1 : 1985 | FORGING MACHINERY, SAFETY REQUIREMENTS FOR, |
| IEEE C37.32-2002 | American National Standard for High Voltage Switches, Bus Supports, and Accessories Schedules of Preferred Ratings, Construction Guidelines, and Specifications |
| UL 60950-22:2ED 2017-03-31 | Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors |
| UFC 3-580-01 : Change 1 | UNIFIED FACILITIES CRITERIA - TELECOMMUNICATIONS INTERIOR INFRASTRUCTURE PLANNING AND DESIGN |
| IEEE 1724-2011 | IEEE Guide for the Preparation of a Transmission Line Design Criteria Document |
| CSA T568.2 : 2005 : R2010 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS |
| IEEE C37.10-2011 REDLINE | IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures |
| IEEE 979-2012 | IEEE Guide for Substation Fire Protection |
| IEEE 1686-2013 | IEEE Standard for Intelligent Electronic Devices Cyber Security Capabilities |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| ASTM D 1050 : 2005 | Standard Specification for Rubber Insulating Line Hose |
| ASTM D 1050 : 2005 : EDT 1 | Standard Specification for Rubber Insulating Line Hose |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| IEC 60076-21:2011 | Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| IEEE 1243:1997 | GUIDE FOR IMPROVING THE LIGHTNING PERFORMANCE OF TRANSMISSION LINES |
| NACE SP 01 77 : 2014 | MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS |
| IEEE 400.4-2015 | IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage |
| IEEE 1036-2010 | IEEE Guide for the Application of Shunt Power Capacitors |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| CSA C22.3 No. 1 : 2010 | OVERHEAD SYSTEMS |
| IEEE C37.122.1-2014 | IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
| IEEE 422-2012 | IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities |
| CSA T568.3 : 2005 : R2010 | OPTICAL FIBER CABLING COMPONENTS STANDARD |
| IEEE C62.92.4-2014 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part IV: Distribution |
| IEEE 3007.3-2012 | IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems |
| ANS 57.2-1983 | LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR, |
| IEEE 1303-2011 | IEEE Guide for Static Var Compensator Field Tests |
| IEEE C62.92.3-2012 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III -Generator Auxiliary Systems |
| IEEE 1887-2017 | IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications |
| CSA T568.1 : 2005 : R2010 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS |
| IEEE 575-2014 | IEEE Guide for Bonding Shields and Sheaths of Single-Conductor Power Cables Rated 5 kV through 500 kV |
| IEEE 1590-2009 | IEEE Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems |
| IEEE C57.12.31-2010 | IEEE Standard for Pole-Mounted Equipment--Enclosure Integrity |
| IEEE 1215-2013 REDLINE | IEEE Guide for the Application of Separable Insulated Connectors |
| IEEE C37.95-2014 | IEEE Guide for Protective Relaying of Utility-Consumer Interconnections |
| IEEE 487-2015 | IEEE Standard for the Electrical Protection of Communications Facilities Serving Electric Supply Locations -- General Considerations |
| IEEE 1247 : 2005 | INTERRUPTER SWITCHES FOR ALTERNATING CURRENT, RATED ABOVE 1000 V |
| IEEE C57.12.28-2014 | IEEE Standard for Pad-Mounted Equipment--Enclosure Integrity |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| IEEE C37.20.1-2015 | IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear |
| IEEE 789-2013 | IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE C37.108-2021 | IEEE Guide for Protection of Secondary Network Systems |
| IEEE 1036-2020 | IEEE Guide for the Application of Shunt Power Capacitors |
| IEEE 1627-2019 | IEEE Standard for Transient Overvoltage Protection of DC Electrification Systems by Application of DC Surge Arresters |
| IEEE 1870:2019 | IEEE Guide for the Parameter Measurement of AC Transmission Lines |
| IEEE C37.122.7-2021 | IEEE Guide for Field Testing of Gas-Insulated Substations Rated Above 52 kV |
| IEEE C57.13.1-2017 | IEEE Guide for Field Testing of Relaying Current Transformers |
| IEEE 937-2019 | IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems |
| IEEE 400.1-2018 | IEEE Guide for Field Testing of Laminated Dielectric, Shielded AC Power Cable Systems Rated 5 kV to 500 kV Using High Voltage Direct Current (HVDC) |
| NFPA 12A:2022 | Standard on Halon 1301 Fire Extinguishing Systems |
| NFPA 850:2020 | Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations |
| PIP PNE00003 : 2019 | Process Unit and Offsites Layout Guide |
| NFPA 12:2022 | Standard on Carbon Dioxide Extinguishing Systems |
| NFPA 2010 : 2020 | Standard for Fixed Aerosol Fire Extinguishing Systems |
| PIP ELEGL03 : 2016 | GUIDELINES FOR POWER SYSTEMS ANALYSIS |
| PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
| PIP ELEGL02 : 2011 | ARC FLASH IMPLEMENTATION GUIDELINE |
| PIP CVE02350 : 2012 | ROADWAY DESIGN GUIDE (U.S. CUSTOMARY) |
| PIP CVE02350M : 2012 | ROADWAY DESIGN GUIDE (METRIC) |
| CAN/CSA-C22.2 NO. 60950-22:17 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.