IEEE/ANSI C63.14-2014 REDLINE
Current
Current
The latest, up-to-date edition.
American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-05-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Quantities, units, multiplying factors, symbols,
and abbreviations
4 Definitions and terminology
Annex A (informative) - Glossary
Gives definition of terms associated with electromagnetic environmental effects including electromagnetic compatibility (EMC), electromagnetic pulse (EMP), and electrostatic discharge (ESD).
| DocumentType |
Standard
|
| ISBN |
978-0-7381-9320-5
|
| Pages |
76
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| IEEE DRAFT 1309 : D2.0 2005 | CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ |
| IEEE/ANSI C63.7-2015 | American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements |
| MIL-STD-188-125-1 Base Document:1998 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND-BASED C[4]1 FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS PART 1 FIXED FACILITIES |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| MIL-STD-1365 Revision C:2010 | GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS |
| IEEE/ANSI C63.4-2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
| ANSI/AAMI/IEC 60601-1-2:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| IEEE 1031-2011 | IEEE Guide for the Functional Specification of Transmission Static Var Compensators |
| SAE J 551/1 : 2015 | PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC COMPATIBILITY OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (16.6 HZ TO 18 GHZ) |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| AAMI TIR18:2010 | GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES |
| MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
| MIL-STD-1605 Revision A:2009 | Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship) |
| IEEE/ANSI C63.22-2004 | American National Standard Guide for Automated Electromagnetic Interference Measurements |
| MIL-STD-469 Revision B:1996 | INTERFACE STANDARD FOR RADAR ENGINEERING INTERFACE REQUIREMENTS, ELECTROMAGNETIC COMPATIBILITY |
| MIL-PRF-49293 Revision B:2011 | RADIAC SET, AN/PDR-75 |
| MIL-HDBK-274 Revision A:2011 | ELECTRICAL GROUNDING FOR AIRCRAFT SAFETY |
| IEEE C63.16-2016 | American National Standard Guide for Electrostatic Discharge Test Methodologies and Acceptance Criteria for Electronic Equipment |
| IEEE/ANSI C63.17-2013 | American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| IEEE 1709-2010 | IEEE Recommended Practice for 1 kV to 35 kV Medium-Voltage DC Power Systems on Ships |
| EIA IS 648 : 1996 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| ISO/TR 10305-2:2003 | Road vehicles — Calibration of electromagnetic field strength measuring devices — Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| IEEE 1662-2008 | IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships |
| PD ISO/TR 16764:2003 | Lifts, escalators and passenger conveyors. Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility |
| IEEE 1309-2013 REDLINE | IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz |
| MIL-STD-462 Revision D:1993 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS |
| AEP-41 VOL 1 : 2004 | UNIFIED ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) PROTECTION, PHILOSOPHY AND METHODOLOGY |
| MIL-PRF-49185 Revision B:1997 | RADIO SET AN/GRC-103(V)3 |
| ANSI DRAFT C63.17 : D3.5 2006 | |
| ISO/TR 16764:2003 | Lifts, escalators and passenger conveyors Comparison of worldwide standards on electromagnetic interference/electromagnetic compatibility |
| IEEE 475-2000 | IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz |
| IEEE 1597.1 : 2008 | VALIDATION OF COMPUTATIONAL ELECTROMAGNETICS COMPUTER MODELING AND SIMULATIONS |
| IEC 60601-1-2:2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| IEEE DRAFT C63.19 : 2005 | METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS |
| 12/30159217 DC : 0 | BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| SAE J 1113/1 : 2013 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ) |
| MIL-STD-188-125-2 Base Document:1999 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND-BASED C[4]I FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS - PART 2 - TRANSPORTABLE SYSTEMS |
| IEEE/ANSI C63.27-2017 | American National Standard for Evaluation of Wireless Coexistence |
| AEP-41 VOL 2 : 2004 | ELECTROMAGNETIC (EM), ENVIRONMENTS (EMES), EM ENVIRONMENTAL EFFECTS (E[3]) AND OPERATIONAL CATEGORIES (OCS) |
| IEEE/ANSI C63.5-2017 | American National Standard for Electromagnetic Compatibility--Radiated Emission Measurements in Electromagnetic Interference (EMI) Control--Calibration and Qualification of Antennas (9 kHz to 40 GHz) |
| IEEE/ANSI C63.12-2015 | American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels |
| IEEE/ANSI C63.9-2008 | American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| IEEE/ANSI C63.26-2015 | IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
| EIA IS 647 : 1996 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE EMISSIONS AND SUSCEPTIBILITY CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
| CSA C22.2 No. 60601.1.2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| IEEE/ANSI C63.24-2021 | American National Standard - Recommended Practice for In Situ RF Immunity Evaluation of Electronic Devices and Systems |
| IEEE/ANSI C63.30-2021 | American National Standard for Methods of Measurements of Radio-Frequency Emissions from Wireless Power Transfer Equipment |
| IEEE/ANSI/USEMCSC C63.29-2022 | American National Standard for Methods of Measurement of Radio-Frequency Emissions from Lighting Devices |
| SAE J1113/1:2023 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| IEEE 1900.1-2008 | IEEE Standard Definitions and Concepts for Dynamic Spectrum Access: Terminology Relating to Emerging Wireless Networks, System Functionality, and Spectrum Management |
| MIL-STD-1541 Revision A:1987 | ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS FOR SPACE SYSTEMS |
| IEEE/ANSI C63.7-1992 | American National Standard Guide for Construction of Open-Area Test Sites for Performing Radiated Emission Measurements |
| MIL-STD-188-141 Revision C:2011 | INTEROPERABILITY AND PERFORMANCE STANDARDS FOR MEDIUM AND HIGH FREQUENCY RADIO SYSTEMS |
| IEEE C63.011-2000 | American National Standard for Limits and Methods of Measurement of Radio Disturbance Characteristics of Industrial, Scientific, and Medical (ISM) Radio-Frequency Equipment |
| MIL-STD-449 Revision D:1973 | MEASUREMENT OF RADIO FREQUENCY SPECTRUM CHARACTERISTICS |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| IEEE/ANSI C63.12-1999 | American National Standard for Electromagnetic Compatibility Limits--Recommended Practice |
| IEEE/ANSI C63.9-2008 | American National Standard for RF Immunity of Audio Office Equipment to General Use Transmitting Devices with Transmitter Power Levels up to 8 Watts |
| MIL-STD-188-100 Base Document:1972 | COMMON LONG HAUL AND TACTICAL COMMUNICATION SYSTEM TECHNICAL STANDARDS, |
| MIL-STD-1542 Revision B:1991 | |
| IEEE 260.1 : 2004 | LETTER SYMBOLS FOR UNITS OF MEASUREMENT (SI UNITS, CUSTOMARY INCH-POUND UNITS, AND CERTAIN OTHER UNITS) |
| MIL-STD-469 Revision B:1996 | INTERFACE STANDARD FOR RADAR ENGINEERING INTERFACE REQUIREMENTS, ELECTROMAGNETIC COMPATIBILITY |
| ANSI C63.4-2009 | METHODS OF MEASUREMENT OF RADIO-NOISE EMISSIONS FROM LOW-VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 9 KHz TO 40 GHz |
| IEEE/ANSI C63.6-1996 | American National Standard Guide for the Computation of Errors in Open-Area Test Site Measurements |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| MIL-STD-1377 Base Document:1971 | EFFECTIVENESS OF CABLE, CONNECTOR, AND WEAPON ENCLOSURE SHIELDING AND FILTERS IN PRECLUDING HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE, MEASUREMENT OF REQUIREMENTS FOR EMPLOYING STANDARD ELECTRONIC MODULATIONS |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| MIL-STD-1605 Revision A:2009 | Procedures for Conducting a Shipboard Electromagnetic Interference (EMI) Survey (Surface Ship) |
| IEEE SI 10-1997 | IEEE/ASTM Standard for Use of the International System of Units (SI): The Modern Metric System |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
| STANAG 3968 : 0 | NATO GLOSSARY OF AIR ELECTRICAL AND ELECTROMAGNETIC TERMINOLOGY |
| STANAG 4436 : 0 | ELECTROMAGNETIC COMPATIBILITY TESTING PROCEDURES AND REQUIREMENTS FOR NAVAL ELECTRICAL AND ELECTRONIC EQUIPMENT (SURFACE SHIP, NON-METALLIC HULL) |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| IEEE/ANSI C63.12-2015 | American National Standard Recommended Practice for Electromagnetic Compatibility Limits and Test Levels |
| MIL-HDBK-235-1 Revision C:2010 | MILITARY OPERATIONAL ELECTROMAGNETIC ENVIRONMENT PROFILES - PART 1: GENERAL GUIDANCE |
| IEEE C63.5-1998 | American National Standard for Electromagnetic Compatibility Radiated Emission Measurements in Electromagnetic Interference (EMI) Control Calibration of Antennas (9 kHz to 40 GHz) |
| IEEE/ANSI C63.2-1996 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz - Specifications |
| ANSI C63.5 : 2006 | ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
| IEEE/ANSI C63.22-2004 | American National Standard Guide for Automated Electromagnetic Interference Measurements |
| ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
| IEEE/ANSI C63.16-1993 | American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment |
| MIL-HDBK-237 Revision D:2005 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM SUPPORTABILITY GUIDANCE FOR THE ACQUISITION PROCESS |
| MIL-HDBK-240 Revision A:2011 | HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE TEST GUIDE |
| IEEE/ANSI C63.19-2011 REDLINE | American National Standard Methods of Measurement of Compatibility between Wireless Communications Devices and Hearing Aids |
| MIL-STD-188-125-1 Base Document:1998 | HIGH-ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND-BASED C[4]1 FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS PART 1 FIXED FACILITIES |
| IEEE/ANSI C63.13-1991 | American National Standard Guide on the Application and Evaluation of EMI Power-Line Filters for Commercial Use |
| MIL-HDBK-274 Revision A:2011 | ELECTRICAL GROUNDING FOR AIRCRAFT SAFETY |
| IEEE/ANSI C63.17-2013 | American National Standard Methods of Measurement of the Electromagnetic and Operational Compatibility of Unlicensed Personal Communications Services (UPCS) Devices |
| MIL-HDBK-419 Revision A:1987 | GROUNDING, BONDING, AND SHIELDING FOR ELECTRONIC EQUIPMENTS AND FACILITIES - VOLUME 1: BASIC THEORY & VOLUME 2: APPLICATIONS |
| IEEE/ANSI C63.7-2015 | American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.