IEEE 62-1995
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors
Available format(s)
PDF
Superseded date
07-08-2021
Language(s)
English
Published date
12-01-1995
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. Overview
1.1 Scope
2. References
3. Definitions
4. Diagnostic chart
5. Safety
5.1 General
5.2 Personnel
5.3 Apparatus
6. Tests and test techniques
6.1 Windings
6.2 Bushings
6.3 Insulating fluids (transformer-grade mineral oil)
6.4 Tap changers
6.5 Core
6.6 Tanks and associated devices
ANNEX
Annex A (informative) Power factor measurements
Annex B (informative) Bushings
Annex C (informative) Infrared temperature measurements
Describes diagnostic tests and measurements that are performed in the field on oil-immersed power transformers and regulators. Additional information is provided regarding specialized test and measuring techniques.
| Committee |
Transformers
|
| DevelopmentNote |
Supersedes IEEE DRAFT 62. (03/2005)
|
| DocumentType |
Standard
|
| Pages |
64
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| Supersedes |
| CEI EN 60076-14 : 2014 | POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| IEEE C57.152-2013 | IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors |
| 12/30263868 DC : 0 | BS EN 60076-14 - POWER TRANSFORMERS - PART 14: LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| I.S. EN 60076-14:2013 | POWER TRANSFORMERS - PART 14: LIQUIDIMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS (IEC 60076-14:2013 (EQV)) |
| IEC TS 60076-14:2009 | Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials |
| IEEE DRAFT 1147 : D8 2005 | GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
| IEEE 43-2000 | IEEE Recommended Practice for Testing Insulation Resistance of Rotating Machinery |
| BS EN 60076-14:2013 | Power transformers Liquid-immersed power transformers using high-temperature insulation materials |
| IEEE DRAFT 1248 : D7 97 | DRAFT GUIDE FOR THE COMMISSIONING OF ELECTRICAL SYSTEMS IN HYDROELECTRIC POWER PLANTS |
| 03/100561 DC : DRAFT JULY 2003 | IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT |
| 02/211941 DC : 0 | IEC 60076-14 ED.1 - GUIDE FOR THE DESIGN AND APPLICATION OF LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| UNE-EN 60076-14:2014 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| IEEE C57.15-2009 REDLINE | IEEE Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators |
| 17/30331680 DC : 0 | BS ISO 18095 - CONDITION MONITORING AND DIAGNOSTICS OF POWER TRANSFORMERS |
| IEEE C57.147-2008 | IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers |
| IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
| BS IEC 60076-21:2011 | Power transformers Standard requirements, terminology, and test code for step-voltage regulators |
| IEC 60076-21:2011 | Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators |
| IEEE DRAFT 43 : 1995 | DRAFT RECOMMENDED PRACTICE FOR TESTING INSULATION RESISTANCE OF ROTATING MACHINERY |
| IEEE C57.159-2016 | IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE 1147-2005 | IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
| IEC 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| DD IEC TS 60076-14 : DRAFT 2009 | POWER TRANSFORMERS - PART 14: DESIGN AND APPLICATION OF LIQUID-IMMERSED POWER TRANSFORMERS USING HIGH-TEMPERATURE INSULATION MATERIALS |
| IEEE C57.150-2012 | IEEE Guide for the Transportation of Transformers and Reactors Rated 10 000 kVA or Higher |
| IEEE C57.93-2007 | IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers |
| IEEE 2030.2-2015 | IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
| EN 60076-14:2013 | Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials |
| IEEE 516-2021 | IEEE Guide for Maintenance Methods on Energized Power Lines |
| IEEE C57.106-2006 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
| IEEE C57.140-2006 | IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers |
| IEEE 516-2009 REDLINE | IEEE Guide for Maintenance Methods on Energized Power Lines |
| IEEE C57.12.90-1993 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power and Regulating Transformers and IEEE Guide for Short-Circuit Testing of Distribution and Power Transformers |
| IEEE C57.12.00-1993 | IEEE Standard General Requirements for Liquid-Immersed Distribution, Power and Regulating Transformers |
| IEEE C57.19.100-2012 REDLINE | IEEE Guide for Application of Power Apparatus Bushings |
| ASTM D 1816 : 2012 : REDLINE | Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes |
| ASTM D 3613 : 1998 | Standard Practice for Sampling Insulating Liquids for Gas Analysis and Determination of Water Content (Withdrawn 2007) |
| IEEE 4-1995 | IEEE Standard Techniques for High-Voltage Testing |
| IEEE C57.104-1991 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| ASTM D 2285 : 1999 | Standard Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method (Withdrawn 2008) |
| IEEE C57.19.00-1991 | IEEE Standard General Requirements and Test Procedure for Outdoor Power Apparatus Bushings |
| ASTM D 924 : 2015 : REDLINE | Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids |
| IEEE C57.12.00-2015 | IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
| IEEE C57.106-1991 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
| IEEE 510-1983 | IEEE Recommended Practices for Safety in High-Voltage and High-Power Testing |
| IEEE C57.12.80-1978 | IEEE Standard Terminology for Power and Distribution Transformers |
| IEEE C57.12.90-2010 | IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| ASTM D 1533 : 2012 : REDLINE | Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
| IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| IEEE 637-1985 | IEEE Guide for the Reclamation of Insulating Oil and Criteria for Its Use |
| IEEE C57.113-1991 | IEEE Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors |
| ASTM D 1524 : 2015 : REDLINE | Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field |
| ASTM D 923 : 2015 : REDLINE | Standard Practices for Sampling Electrical Insulating Liquids |
| IEEE C57.19.100-1995 | IEEE Guide for Application of Power Apparatus Bushings |
| IEEE C57.106-2006 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.