IEC TS 62647-22:2013
Current
The latest, up-to-date edition.
Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
09-25-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Approach
5 General Pb-free solder alloy behavior
6 System level service environment
7 High performance electronics testing
8 Solder joint reliability considerations
9 Piece parts
10 Printed circuit boards
11 Printed circuit board (PCB)/printed wiring board
(PWB) assembly
12 Module assembly considerations
13 Manufacturing resources
14 Aerospace wiring/cabling considerations
15 Rework/repair
16 Generic life testing
17 Similarity analysis
Annex A (informative) - Equipment service environmental
definition
Bibliography
IEC/TS 62647-22:2013(E) is intended for use as technical guidance by aerospace, defence, and high performance (ADHP) electronic applications and systems suppliers, e.g., original equipment manufacturers (OEMs) and system maintenance facilities, in developing and implementing designs and processes to ensure the continued performance, quality, reliability, safety, airworthiness, configuration control, affordability, maintainability, and supportability of high performance aerospace systems both during and after the transition to Pb-free electronics. The guidelines may be used by the OEMs and maintenance facilities to implement the methodologies they use to ensure the performance, reliability, airworthiness, safety, and certifiability of their products, in accordance with IEC/TS 62647-1:2012. This document also contains lessons learned from previous experience with Pb-free aerospace electronic systems.
| Committee |
TC 107
|
| DevelopmentNote |
Supersedes IEC PAS 62647-22. (09/2013) Stability date: 2019. (11/2017)
|
| DocumentType |
Technical Specification
|
| Pages |
70
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PD IEC/TS 62647-22:2013 | Identical |
| IEC TS 62647-3:2014 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes |
| IEC TS 62647-23:2013 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies |
| PD IEC/TS 62647-23:2013 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies |
| PD IEC/TS 62647-3:2014 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Performance testing for systems containing lead-free solder and finishes |
| IPC J STD 609 : A | MARKING AND LABELING OF COMPONENTS, PCBS AND PCBAS TO IDENTIFY LEAD (PB), LEAD-FREE (PB-FREE) AND OTHER ATTRIBUTES |
| IPC 4552 : 0 | PERFORMANCE SPECIFICATION FOR ELECTROLESS NICKEL/IMMERSION GOLD (ENIG) PLATING FOR PRINTED BOARDS |
| IPC 6011 : 0 | GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS |
| IPC 4553 : A | SPECIFICATION FOR IMMERSION SILVER PLATING FOR PRINTED BOARDS |
| IEC PAS 62647-3:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| IPC JP002 : 0 | JEDEC/IPC CURRENT TIN WHISKERS THEORY AND MITIGATION PRACTICES GUIDELINE |
| IPC CC 830 : B | QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| ASTM G 85 : 2011 : REDLINE | Standard Practice for Modified Salt Spray (Fog) Testing |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| IPC TM 650 : 0 | TEST METHODS MANUAL |
| IEC TS 62647-21:2013 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 21: Program management - Systems engineering guidelines for managing the transition to lead-free electronics |
| IPC J STD 033C-1:2014 | HANDLING, PACKING, SHIPPING AND USE OF MOISTURE, REFLOW, AND PROCESS SENSITIVE DEVICES |
| GEIA HB 0005-3 : 2008 | REWORK/REPAIR HANDBOOK TO ADDRESS THE IMPLICATIONS OF LEAD-FREE ELECTRONICS AND MIXED ASSEMBLIES IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| GEIA STD 0005-2 : 2012 | MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| IEC PAS 62647-23:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 23: Rework and repair guidance to address the implications of lead-free electronics and mixed assemblies |
| IPC J STD 002 : D | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| IPC 1066 : 0 | MARKING, SYMBOLS AND LABELS FOR IDENTIFICATION OF LEAD-FREE AND OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES |
| GEIA STD 0005-1 : 2012 | PERFORMANCE STANDARD FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER |
| IEC TS 62647-1:2012 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Preparation for a lead-free control plan |
| IPC 9201 : A | SURFACE INSULATION RESISTANCE HANDBOOK |
| IPC 9701 : A | PERFORMANCE TEST METHODS AND QUALIFICATION REQUIREMENTS FOR SURFACE MOUNT SOLDER ATTACHMENTS |
| GEIA STD 0006 : 2008 | REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS |
| IPC 4554 : 0 | SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS |
| ARINC 671 : 2006 | GUIDANCE FOR THE TRANSITION TO LEAD-FREE SOLDERING, MAINTENANCE, AND REPAIR |
| IPC 7095 : C | DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR BGAS |
| IPC 1752 : A-2 | MATERIALS DECLARATION MANAGEMENT |
| IEC TS 62647-2:2012 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 2: Mitigation of deleterious effects of tin |
| IPC 6012 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.