IEC 62471:2006
Current
The latest, up-to-date edition.
Photobiological safety of lamps and lamp systems
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, Spanish, Castilian
07-26-2006
FOREWORD
INTRODUCTION
1. SCOPE
2. NORMATIVE REFERENCES
3. DEFINITIONS, SYMBOLS AND ABBREVIATIONS
4. EXPOSURE LIMITS (EL'S)
4.1 General
4.2 Specific factors involved in the determination
and application of retinal exposure limits
4.2.1 Pupil diameter
4.2.2 Angular subtense of source and measurement
field-of-view
4.3 Hazard exposure limits
4.3.1 Actinic UV hazard exposure limit for the skin
and eye
4.3.2 Near-UV hazard exposure limit for the eye
4.3.3 Retinal blue light hazard exposure limit
4.3.4 Retinal blue light hazard exposure limit - small
source
4.3.5 Retinal thermal hazard exposure limit
4.3.6 Retinal thermal hazard exposure limit - weak
visual stimulus
4.3.7 Infrared radiation hazard exposure limits for
the eye
4.3.8 Thermal hazard exposure limit for the skin
5. MEASUREMENT OF LAMPS AND LAMP SYSTEMS
5.1 Measurement conditions
5.1.1 Lamp ageing (seasoning)
5.1.2 Test environment
5.1.3 Extraneous radiation
5.1.4 Lamp operation
5.1.5 Lamp system operation
5.2 Measurement procedure
5.2.1 Irradiance measurements
5.2.2 Radiance measurements
5.2.3 Measurement of source size
5.2.4 Pulse width measurement for pulsed sources
5.3 Analysis methods
5.3.1 Weighting curve interpolations
5.3.2 Calculations
5.3.3 Measurement uncertainty
6. LAMP CLASSIFICATION
6.1 Continuous wave lamps
6.1.1 Exempt group
6.1.2 Risk Group 1 (Low-Risk)
6.1.3 Risk Group 2 (Moderate-Risk)
6.1.4 Risk Group 3 (High-Risk)
6.2 Pulsed lamps
ANNEX A (informative) SUMMARY OF BIOLOGICAL EFFECTS
Bioeffect datasheet #1: Infrared cataract
Bioeffect datasheet #2: Photokeratitis
Bioeffect datasheet #3: Photoretinitis
Bioeffect datasheet #4: Retinal thermal injury
Bioeffect datasheet #5: Ultraviolet cataract
Bioeffect datasheet #6: Ultraviolet erythema
ANNEX B (informative) MEASUREMENT METHOD
B.1 Instrumentation
B.1.1 Double monochromator: Recommended instrument
B.1.2 Broadband detectors
B.2 Instrument limitations
B.2.1 Noise equivalent irradiance
B.2.2 Instrument spectral response
B.2.3 Wavelength accuracy
B.2.4 Stray radiant power
B.2.5 Input optics for spectral irradiance
measurements: Recommendation
B.2.6 Linearity
B.3 Calibration sources
ANNEX C (informative) UNCERTAINTY ANALYSIS
ANNEX D (informative) GENERAL REFERENCES
Gives guidance for evaluating the photobiological safety of lamps and lamp systems including luminaires. Specifically it specifies the exposure limits, reference measurement technique and classification scheme for the evaluation and control of photobiological hazards from all electrically powered incoherent broadband sources of optical radiation, including LEDs but excluding lasers, in the wavelength range from 200 nm through 3000 nm. This standard was prepared as Standard CIE S 009:2002 by the International Commission on Illumination.
Committee |
TC 76
|
DevelopmentNote |
Also numbered as CIE S 009 (07/2006) Stability Date: 2017. (09/2017)
|
DocumentType |
Standard
|
Pages |
89
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Standards | Relationship |
GOST R IEC 62471 : 2013 | Identical |
NF EN 62471 : 2008 | Identical |
DIN EN 62471 : 2009 | Identical |
EN 62471:2008 | Identical |
AS/NZS IEC 62471:2011 | Identical |
VDE 0837-471 : 2009 | Identical |
UNE-EN 62471:2009 | Identical |
09/30207781 DC : 0 | BS EN 62560 - SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS |
IEC TS 61496-4-2:2014 | Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using reference pattern techniques (VBPDPP) |
11/30257881 DC : 0 | BS EN 61195:1999/AMD 1 - DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
I.S. EN 61029-2-9:2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS (IEC 61029-2-9:1995 (MOD)) |
BS ISO 16142-2:2017 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
15/30325838 DC : 0 | BS EN 62943 ED. 1.0 - VISIBLE LIGHT BEACON SYSTEM FOR MULTIMEDIA APPLICATIONS |
18/30356172 DC | BS EN 63109. Assessment of blue light hazard of light sources and luminaires |
15/30328959 DC : 0 | BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
BS EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services. Safety requirements |
12/30258455 DC : 0 | FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
I.S. EN 62838:2016 | LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS |
BS EN 61228:1995 | Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning |
DIN SPEC 67600:2013-04 | Biologically effective illumination - Design guidelines |
UNI EN ISO 80601-2-61 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
BS EN 62471-5:2015 | Photobiological safety of lamps and lamp systems Image projectors |
NF EN 62031 : 2008 AMD 2 2015 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS |
16/30346073 DC : 0 | BS ISO 16142-2 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
17/30353444 DC : DRAFT SEP 2017 | BS EN 13272-2 - RAILWAY APPLICATIONS - ELECTRICAL LIGHTING FOR ROLLING STOCK IN PUBLIC TRANSPORT SYSTEMS - PART 2: URBAN RAIL SYSTEMS |
13/30245306 DC : 0 | BS EN ISO 9680 - DENTISTRY - OPERATING LIGHTS |
12/30258880 DC : 0 | BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS |
I.S. EN 16844:2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES |
11/30212367 DC : 0 | BS EN ISO 13482 - ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR NON-INDUSTRIAL ROBOTS - NON-MEDICAL PERSONAL CARE ROBOT |
12/30268348 DC : 0 | BS EN 62504 - GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS |
I.S. EN 62798:2014 | INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS |
I.S. EN 60432-3:2013 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTENHALOGEN LAMPS (NON-VEHICLE) (IEC 60432-3:2012 (EQV)) |
ISO/IEC 29794-6:2015 | Information technology Biometric sample quality Part 6: Iris image data |
DIN EN ISO 13482:2014-11 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
ISO 10650:2015 | Dentistry Powered polymerization activators |
BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
I.S. EN 61199:2011 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
BS EN 62504:2014 | General lighting. Light emitting diode (LED) products and related equipment. Terms and definitions |
BS EN 62560:2012+A11:2019 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications |
I.S. EN 62943:2017 | VISIBLE LIGHT BEACON SYSTEM FOR MULTIMEDIA APPLICATIONS |
I.S. EN 61195:2003 | DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
BS EN 60065 : 2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED) |
I.S. EN 62560:2012/A11:2019 | SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS |
IEC 60335-2-40:2018 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
ISO 16142-2:2017 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards |
I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN ISO 80601-2-61:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment |
IEC 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
IEC 62931:2017 | GX16t-5 capped tubular LED lamp - Safety specifications |
UNE-EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
CEI EN 62693 : 2014 | INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS |
IEC 61010-2-120:2016 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-120: Particular safety requirements for machinery aspects of equipment |
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
UNE-EN 61029-2-9:2013 | Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws |
BS EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing General requirements |
UNE-EN ISO 11252:2013 | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
EN 61228:2008 | Fluorescent ultraviolet lamps used for tanning - Measurement and specification method |
IEC 60335-2-40:2018 RLV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
EN 62693:2013 | Industrial electroheating installations - Test methods for infrared electroheating installations |
EN 61029-2-11:2012/A11:2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS |
EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
EN 62838:2016/AC:2017-11 | LEDSI LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES NOT EXCEEDING 50 V A.C. R.M.S. OR 120 V RIPPLE FREE D.C. - SAFETY SPECIFICATIONS |
EN 62035:2014 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
EN 61199:2011/A2:2015 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014) |
EN ISO 9680:2014 | Dentistry - Operating lights (ISO 9680:2014) |
NF EN 61228 : 2008 | FLUORESCENT ULTRAVIOLET LAMPS USED FOR TANNING - MEASUREMENT AND SPECIFICATION METHOD |
EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications |
EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
EN 62798:2014/AC:2014 | INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS (IEC 62798:2014) |
CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
DIN EN 16237:2013-04 | Classification of non-electrical sources of incoherent optical radiation |
NF EN ISO 80601-2-61 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
BS EN 62693:2013 | Industrial electroheating installations. Test methods for infrared electroheating installations |
11/30187418 DC : 0 | BS ISO 12609-1 - EYEWEAR FOR PROTECTION AGAINST INTENSE LIGHT SOURCES USED ON HUMANS AND ANIMALS FOR COSMETIC AND MEDICAL APPLICATIONS - PART 1: SPECIFICATION FOR PRODUCTS |
18/30373839 DC : 0 | BS EN 60601-2-41 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-41: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL LUMINAIRES AND LUMINAIRES FOR DIAGNOSIS |
UNE-EN 62504:2015 | General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
I.S. EN ISO 15004-2:2007 | OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION |
12/30258456 DC : 0 | BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
I.S. EN 61167:2016 | METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
BS EN 61029-2-11 : 2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS |
BS ISO/IEC 29794-6:2015 | Information technology. Biometric sample quality Iris image data |
12/30265031 DC : 0 | BS EN 60825-12 ED.2 - SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION |
CEI EN 62532 : 2012 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
14/30284310 DC : 0 | BS ISO 10650 - DENTISTRY - POWERED POLYMERIZATION ACTIVATORS |
BS EN 16237:2013 | Classification of non-electrical sources of incoherent optical radiation |
PD IEC/TR 62471-2:2009 | Photobiological safety of lamps and lamp systems Guidance on manufacturing requirements relating to non-laser optical radiation safety |
BS EN 60519-12:2013 | Safety in electroheating installations Particular requirements for infrared electroheating installations |
BS EN 61496-2:2013 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
11/30193150 DC : 0 | BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
PD ISO/TR 20824:2007 | Ophthalmic instruments. Background for light hazard specification in ophthalmic instrument standards |
ANSI/AAMI/ISO 16142-2:2017 | MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
BS EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
09/30206024 DC : 0 | BS EN 61199 - SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
11/30238977 DC : 0 | BS EN 61496-2 - SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
I.S. EN 80601-2-60:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT |
SAE ARP 6259 : 2016 | LED REPLACEMENT FOR INCANDESCENT/HALOGEN BULBS OR FLUORESCENT LAMPS TRANSPORT CATEGORY AIRCRAFT AND ROTORCRAFT |
BS EN 61167:2011 | Metal halide lamps. Performance specification |
CEI 34-141 : 2014 | APPLICATION OF IEC 62471 FOR THE ASSESSMENT OF BLUE LIGHT HAZARD TO LIGHT SOURCES AND LUMINAIRES |
I.S. EN 62931:2017 | GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS |
I.S. EN 60601-2-57:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
BS EN 61195:2000 | Double-capped fluorescent lamps. Safety specifications |
BS EN 60432-1 : 2000 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
UNE-EN 62532:2011 | Fluorescent induction lamps - Safety specifications |
I.S. EN 60432-2:2004 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-2:1999 (MOD)) |
UNE-EN 62035:2015 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
CEI EN 60432-3 : 2013 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN-HALOGEN LAMPS (NON-VEHICLE) |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
BS EN 60432-3:2013 | Incandescent lamps. Safety specifications Tungsten-halogen lamps (non-vehicle) |
CSA C22.2 No. 80601-2-61 : 2014(R2019) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
IEC 62943:2017 | Visible light beacon system for multimedia applications |
AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
IEC TR 62471-2:2009 | Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety |
EN 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
IEC 62031:2008+AMD1:2012+AMD2:2014 CSV | LED modules for general lighting - Safety specifications |
14/30311240 DC : 0 | BS EN 61010-1 ED 3 AMD 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
DIN EN ISO 9680:2015-02 | Dentistry - Operating lights (ISO 9680:2014) |
EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
DIN EN ISO 15004-2:2007-06 | Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2007) |
I.S. EN ISO 11252:2013 | LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013) |
I.S. EN ISO 9680:2014 | DENTISTRY - OPERATING LIGHTS (ISO 9680:2014) |
BIS IS 13252-1 : 2010 AMD 1 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
ANSI/IES RP-27.1:2022 | RISK GROUP CLASSIFICATION AND MINIMIZATION OF PHOTOBIOLOGICAL HAZARDS FROM ULTRAVIOLET LAMPS AND LAMP SYSTEM |
CEI EN 61496-2 : 2014 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
BS EN 61029-2-9 : 2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS |
17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN ISO 10650:2015 | Dentistry. Powered polymerization activators |
12/30239877 DC : 0 | BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
11/30247491 DC : 0 | BS EN 60432-3:2000/AMD3 - INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSE |
BS EN 60601-2-57:2011 | Medical electrical equipment Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
I.S. EN 62031:2008 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008 (EQV)) |
IEC TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
PD IEC/TR 62778:2014 | Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
BS EN 62943:2017 | Visible light beacon system for multimedia applications |
BS EN 62798:2014 | Industrial electroheating equipment. Test methods for infrared emitters |
09/30165797 DC : 0 | BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
16/30338446 DC : 0 | BS ISO 20498-2 - TRADITIONAL CHINESE MEDICINE - COMPUTERISED TONGUE IMAGE ANALYSIS SYSTEM - PART 2: LIGHT ENVIRONMENT |
BS ISO 16142-1:2016 | Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
CEI 76-10 : 2011 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 2: GUIDANCE ON MANUFACTURING REQUIREMENTS RELATING TO NON-LASER OPTICAL RADIATION SAFETY |
PD IEC/TS 61496-4-2:2014 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using reference pattern techniques (VBPDPP) |
14/30254042 DC : 0 | BS EN ISO 15004-2 - OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION |
13/30287162 DC : 0 | BS EN 62471-5 ED.1.0 - PHOTOBIOLOGICAL SAFETY OF LAMP SYSTEMS FOR IMAGE PROJECTORS |
CSA C22.2 No. 62560 : 2016 | SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS |
CSA C22.2 No. 80601-2-60 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT |
ISO/TR 20824:2007 | Ophthalmic instruments Background for light hazard specification in ophthalmic instrument standards |
I.S. EN 61228:2008 | FLUORESCENT ULTRAVIOLET LAMPS USED FOR TANNING - MEASUREMENT AND SPECIFICATION METHOD |
I.S. EN 13032-2:2017 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
I.S. EN 61029-2-11:2012 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-11: PARTICULAR REQUIREMENTS FOR COMBINED MITRE AND BENCH SAWS (IEC 61029-2-11:2001 (MOD)) |
I.S. EN 62776:2015 | DOUBLE-CAPPED LED LAMPS DESIGNED TO RETROFIT LINEAR FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
ISO 16142-1:2016 | Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards |
I.S. EN 62504:2014 | GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS (IEC 62504:2014/A1:2018) |
UNE-EN 62471-5:2016 | Photobiological safety of lamps and lamp systems - Part 5: Image projectors |
IEC 60335-2-27:2009+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to optical radiation |
BS EN 60598-1:2015 | Luminaires General requirements and tests |
IEC 62031:2018 RLV | LED modules for general lighting - Safety specifications |
EN 62504:2014/A1:2018 | GENERAL LIGHTING - LIGHT EMITTING DIODE (LED) PRODUCTS AND RELATED EQUIPMENT - TERMS AND DEFINITIONS |
I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
CSA C22.2 No. 60601-2-57:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
PREN 12978 : DRAFT 2017 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
IEC 62115:2017 | Electric toys - Safety |
EN 62931:2017 | GX16t-5 capped tubular led lamp - Safety specifications |
EN 16844:2017 | Aesthetic medicine services - Non-surgical medical treatments |
IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
IEC 60601-2-75:2017 | Medical electrical equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment |
DIN EN ISO 15004-2:2014-04 (Draft) | OPHTHALMIC INSTRUMENTS - FUNDAMENTAL REQUIREMENTS AND TEST METHODS - PART 2: LIGHT HAZARD PROTECTION |
IEC 62504:2014 | General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions |
UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
CEI EN 60519-1 : 2016 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
EN 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
EN 61167:2016 | Metal halide lamps - Performance specification |
UNI EN ISO 11252 : 2013 | LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION |
UNI EN 16237 : 2013 | CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION |
IES TM 16 : 2017 | SOLID STATE LIGHTING SOURCES AND SYSTEMS |
IES HB 10 : 2011 | THE LIGHTING HANDBOOK |
PD IEC/TR 60825-13:2011 | Safety of laser products Measurements for classification of laser products |
BIS IS 16148 : 2014 | METAL HALIDE LAMPS - PERFORMANCE SPECIFICATION |
SAE ARP 5029 : 2014 | MEASUREMENT PROCEDURES FOR STROBE ANTICOLLISION LIGHTS |
13/30260433 DC : 0 | BS ISO/IEC 29794-6 - INFORMATION TECHNOLOGY - BIOMETRIC SAMPLE QUALITY STANDARD - PART 6: IRIS IMAGE DATA |
09/30192488 DC : 0 | BS EN 62595 ED.1 - MEASUREMENT METHODS OF LED BACKLIGHT UNIT FOR LIQUID CRYSTAL DISPLAYS |
12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
11/30247487 DC : 0 | BS EN 60432-2:2000/AMD2 - INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN-HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
BS EN 62031 : 2008 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS |
CEI EN 62471-5 : 2016 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS |
07/30162194 DC : 0 | BS 8497-1 - EYEWEAR FOR PROTECTION AGAINST INTENSE LIGHT SOURCES USED ON HUMANS AND ANIMALS FOR COSMETIC AND MEDICAL APPLICATIONS - PART 1: SPECIFICATION |
I.S. EN 62693:2013 | INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 62693:2013 (EQV)) |
14/30297042 DC : 0 | BS EN 60335-2-27/ED5/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-27: PARTICULAR REQUIREMENTS FOR SKIN EXPOSURE TO ULTRAVIOLET AND INFRARED RADIATION |
16/30345783 DC : 0 | BS EN 13032-2 - LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
BS EN 80601-2-60:2015 | Medical electrical equipment Particular requirements for the basic safety and essential performance of dental equipment |
13/30277819 DC : 0 | BS EN 62776 ED 1.0 - DOUBLE-CAPPED LED LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY SPECIFICATIONS |
I.S. EN 61010-2-040:2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS |
BS ISO 20498-2:2017 | Traditional Chinese medicine. Computerized tongue image analysis system Light environment |
14/30290166 DC : 0 | BS ISO 16142-1 - MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 1: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL NON-IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS |
12/30273415 DC : 0 | BS EN 60968 - SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS |
UNE-EN 60065:2015 | Audio, video and similar electronic apparatus - Safety requirements |
08/30175845 DC : DRAFT JAN 2008 | BS IEC 62471-2 - PHOTO BIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 2: GUIDANCE ON MANUFACTURING REQUIREMENTS RELATING TO NON-LASER OPTICAL RADIATION SAFETY |
UNE-EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
14/30313143 DC : 0 | BS EN 62931 - GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS |
17/30352734 DC : 0 | BS EN 60947-5-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES |
PD IEC/TS 61496-4-3:2015 | Safety of machinery. Electro-sensitive protective equipment Particular requirements for equipment using vision based protective devices (VBPD). Additional requirements when using stereo vision techniques (VBPDST) |
12/30259737 DC : 0 | BS EN 62031:2008+A2 - LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS |
BS EN ISO 13482:2014 | Robots and robotic devices. Safety requirements for personal care robots |
12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
EN ISO 10650:2015 | Dentistry - Powered polymerization activators (ISO 10650:2015) |
BS EN 61010-2-012:2016 | Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
PREN 13032-2 : DRAFT 2016 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 2: PRESENTATION OF DATA FOR INDOOR AND OUTDOOR WORK PLACES |
CSA C22.2 No. 60065 : 2016 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
I.S. EN 60968:2015 | SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS |
I.S. EN 16844:2017+A2:2019 | Aesthetic medicine services - Non-surgical medical treatments |
I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
I.S. EN 60065:2014 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
CEI EN 80601-2-60 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT |
BS EN 60432-2 : 2000 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
I.S. EN 61010-2-012:2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
I.S. EN 62532:2011 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
I.S. EN ISO 13482:2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS (ISO 13482:2014) |
I.S. EN 16237:2013 | CLASSIFICATION OF NON-ELECTRICAL SOURCES OF INCOHERENT OPTICAL RADIATION |
I.S. EN 60519-1:2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
CEI EN 61010-2-012 : 1ED 2017 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-012: PARTICULAR REQUIREMENTS FOR CLIMATIC AND ENVIRONMENTAL TESTING AND OTHER TEMPERATURE CONDITIONING EQUIPMENT |
CEI EN 60519-12 : 2014 | SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS |
BS EN 61199 : 2011 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
17/30362673 DC : 0 | BS EN 12978 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS |
EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
DIN EN ISO 10650:2016-02 | DENTISTRY - POWERED POLYMERIZATION ACTIVATORS (ISO 10650:2015) |
EN 13032-2:2017 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places |
UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
SAE ARP 1283 : 2014 | CARGO COMPARTMENT LIGHTING FOR TRANSPORT CATEGORY AIRCRAFT AND ROTORCRAFT |
EN ISO 80601-2-61:2011 | Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011) |
IEC 62035:2014+AMD1:2016 CSV | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
IEC 62560:2011+AMD1:2015 CSV | Self-ballasted LED-lamps for general lighting services by voltage >50 V - Safety specifications |
12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
PD IEC/TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children |
BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
IEC 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
13/30277685 DC : 0 | BS EN 60519-1 - SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
IEC 61199:2011+AMD1:2012+AMD2:2014 CSV | Single-capped fluorescent lamps - Safety specifications |
BS EN 62838:2016 | LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. Safety specifications |
IEC TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children |
IEC 62532:2011+AMD1:2016 CSV | Fluorescent induction lamps - Safety specifications |
IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
IEC 80601-2-60:2012 | Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
IEC 61195:1999+AMD1:2012+AMD2:2014 CSV | Double-capped fluorescent lamps - Safety specifications |
EN 62031:2008/A2:2015 | LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014) |
BS EN ISO 15004-2:2007 | Ophthalmic instruments. Fundamental requirements and test methods Light hazard protection |
IEC 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
BS EN ISO 9680:2014 | Dentistry. Operating lights |
UNE-EN 62838:2016 | LEDsi lamps for general lighting services with supply voltages not exceeding 50 v a.c. r.m.s. or 120 v ripple free D.C. - Safety specifications |
ISO 13482:2014 | Robots and robotic devices Safety requirements for personal care robots |
ISO 15004-2:2007 | Ophthalmic instruments Fundamental requirements and test methods Part 2: Light hazard protection |
EN 80601-2-60:2015 | Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
IEC 62693:2013 | Industrial electroheating installations - Test methods for infrared electroheating installations |
UNE-EN 60601-2-57:2012 | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
ISO 11252:2013 | Lasers and laser-related equipment — Laser device — Minimum requirements for documentation |
IEC 60601-2-57:2011 | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
BS EN ISO 11252:2013 | Lasers and laser-related equipment. Laser device. Minimum requirements for documentation |
ISO 9680:2014 | Dentistry Operating lights |
12/30266672 DC : 0 | BS EN 60598-1 ED 8.0 - LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 61228:2008 | Fluorescent ultraviolet lamps used for tanning - Measurement and specification method |
BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
EN 16237:2013 | Classification of non-electrical sources of incoherent optical radiation |
UNI EN ISO 9680 : 2015 | DENTISTRY - OPERATING LIGHTS |
EN ISO 15004-2:2007 | Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO 15004-2:2007) |
EN ISO 13482:2014 | Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014) |
IEEE 1789-2015 | IEEE Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers |
I.S. EN ISO 80601-2-61:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
I.S. EN ISO 10650:2015 | DENTISTRY - POWERED POLYMERIZATION ACTIVATORS (ISO 10650:2015) |
UNI EN ISO 13482 : 2014 | ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR PERSONAL CARE ROBOTS |
11/30232867 DC : 0 | BS EN 60519-12 - SAFETY IN ELECTRO HEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTRO HEATING INSTALLATIONS |
BS 8497-1:2008 | Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Specification for products |
11/30247483 DC : 0 | BS EN 60432-1:2000/AMD2 - INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
UNE-EN 61199:2012 | Single-capped fluorescent lamps - Safety specifications |
13/30279160 DC : 0 | BS EN 6101-2-0120 ED.1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, LABORATORY USE - PART 2-0120: PARTICULAR SAFETY REQUIREMENTS FOR MACHINERY |
I.S. EN 62471-5:2015 | PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS |
13/30277696 DC : 0 | BS EN 60398 - INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL TEST METHODS |
PD CEN/TS 17108:2017 | Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice |
BS EN 62931:2017 | GX16t-5 capped tubular led lamp. Safety specifications |
BS EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps. Safety specifications |
I.S. EN 60432-1:2004 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999 (MOD)) |
CSA C22.2 No. 60601-2-57 : 2011 : R2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
13/30282399 DC : 0 | BS EN 62868 ED 1.0 - ORGANIC LIGHT EMITTING DIODE (OLED) PANELS FOR GENERAL LIGHTING - SAFETY REQUIREMENTS |
IEC TR 60825-13:2011 | Safety of laser products - Part 13: Measurements for classification of laser products |
I.S. EN 60519-12:2013 | SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 60519-12:2013 (EQV)) |
CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
BS EN 62532 : 2011 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
IEEE 802.15.7-2011 | IEEE Standard for Local and Metropolitan Area Networks--Part 15.7: Short-Range Wireless Optical Communication Using Visible Light |
UNE-EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications |
I.S. EN 61496-2:2013 | SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR EQUIPMENT USING ACTIVE OPTO-ELECTRONIC PROTECTIVE DEVICES (AOPDS) |
CSA C22.2 No. 61010.2.040 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-040: PARTICULAR REQUIREMENTS FOR STERILIZERS AND WASHER-DISINFECTORS USED TO TREAT MEDICAL MATERIALS |
EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
I.S. EN 62035:2014 | DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS |
UNE-EN 60432-3:2013 | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
ISO 20498-2:2017 | Traditional Chinese medicine — Computerized tongue image analysis system — Part 2: Light environment |
UNE-EN ISO 10650:2016 | Dentistry - Powered polymerization activators (ISO 10650:2015) |
S.R. CEN/TR 17108:2017 | NON-DESTRUCTIVE TESTING - LIGHTING IN PENETRANT AND MAGNETIC PARTICLE TESTING, GOOD PRACTICE |
NF EN 60065 : 2015 AMD 11 2018 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
NF EN 60519-12 : 2013 | SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS |
BS EN 16844 : 2017 | AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS |
BS EN 62035:2014 | Discharge lamps (excluding fluorescent lamps). Safety specifications |
IEC TS 61496-4-3:2015 | Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment using vision based protective devices (VBPD) - Additional requirements when using stereo vision techniques (VBPDST) |
DIN EN ISO 11252:2014-02 | LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013) |
IEC 62676-5:2018 | Video surveillance systems for use in security applications - Part 5: Data specifications and image quality performance for camera devices |
07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
IEC 60432-3:2012 | Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) |
IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
EN 62532:2011/A1:2017 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
CEN/TR 17108:2017 | Non-destructive testing - Lighting in penetrant and magnetic particle testing, good practice |
EN 61195:1999/A2:2015 | DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014) |
EN 61029-2-9:2012/A11:2013 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 2-9: PARTICULAR REQUIREMENTS FOR MITRE SAWS (IEC 61029-2-9:1995, MODIFIED) |
EN 60432-2:2000/A2:2012 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES |
EN ISO 11252:2013 | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
EN 60432-1:2000/A2:2012 | INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011) |
NF EN 60519-1 : 2015 | SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS |
EN 62943:2017 | Visible light beacon system for multimedia applications |
EN 62471-5:2015 | Photobiological safety of lamps and lamp systems - Part 5: Image projectors |
EN 60601-2-57:2011 | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
EN 60432-3:2013 | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
CSA E60598.1 : 2016 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
ANSI/IES RP-46:2023 | Recommended Practice: Supporting the Physiological and Behavioral Effects of Lighting in Interior Daytime Environments |
ISO 17166:1999 | Erythema reference action spectrum and standard erythema dose |
IEC TR 60825-9:1999 | Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation |
AS/NZS 62676.5:2020 | Video surveillance systems for use in security applications Data specifications and image quality performance for camera devices (IEC 62676-5:2018, MOD) |
AS/NZS 60335.2.27:2020 | Household and similar electrical appliances - Safety Particular requirements for appliances for skin exposure to optical radiation (IEC 60335-2-27 Ed 6, MOD) |
AS/NZS 62838:2020 | LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. - Safety specifications (IEC 62838:2015 (ED.1.0)/COR1:2017, MOD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.