IEC 61984:2008
Current
Current
The latest, up-to-date edition.
Connectors - Safety requirements and tests
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
10-08-2008
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Technical information (electrical ratings)
5 Classification
6 Constructional requirements and performance
7 Tests
Annex A (informative) - Information to be specified in the
detail specification, if any, or manufacturer's
specification
Annex B (informative) - Additional information on connector
classification
Bibliography
IEC 61984:2008 applies to connectors with rated voltages above 50 V and up to 1000 V a.c. and d.c. and rated currents up to 125 A per contact, for which either no detail specification exists or the detail specification calls up this standard for safety aspects. Changes with respect to the previous edition include: addition of new definitions, of new clauses, tables and annexes for clarification, improvement and better readability. The contents of the corrigendum of October 2011 have been included in this copy.
| Committee |
TC 48/SC 48B
|
| DevelopmentNote |
Stability Date: 2017. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
91
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 61984 : 2009 | Identical |
| NEN EN IEC 61984 : 2009 | Identical |
| VDE 0627 : 2009 COR 1 2012 | Identical |
| BS EN 61984:2009 | Identical |
| I.S. EN 61984:2009 | Identical |
| UNE-EN 61984:2009 | Identical |
| PN EN 61984 : 2009 | Identical |
| DIN EN 61984 : 2009 COR 1 2012 | Identical |
| EN 61984:2009 | Identical |
| UNE-EN 61984:2002 | Identical |
| PNE-EN 61984 | Identical |
| UNE-EN 1501-5:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| DIN EN 16840:2015-04 (Draft) | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, 50 HZ, AT LEAST 250 A |
| 14/30250046 DC : 0 | BS EN 61076-2-111 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| 09/30208429 DC : 0 | BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 61810-1:2015 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| 11/30258040 DC : 0 | BS EN 61810-1 - ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL REQUIREMENTS |
| PD IEC TR 62225:2001 | Guidance on terms for connectors and mechanical structures in electronic equipment |
| 07/30165274 DC : 0 | BS EN 61076-2-106 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS M16 * 0.75 WITH SCREW-LOCKING DEGREE OF PROTECTION IP40 |
| NF EN 61076-2-109 : 2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ |
| UNE-EN 50467:2012 | Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 61076-2-107:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
| I.S. EN 60598-2-20:2015 | LUMINAIRES - PART 2-20: PARTICULAR REQUIREMENTS - LIGHTING CHAINS |
| NF EN 62852 : 2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 61076-3-120:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
| I.S. EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 61812-1:2011 | Time relays for industrial and residential use Requirements and tests |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| UNE-EN 61812-1:2012 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| BS IEC 62852 : 2014 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| 15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 15/30286835 DC : 0 | BS ISO 14990-2 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 2: PARTICULAR REQUIREMENTS FOR EXTERNALLY-POWERED MACHINES |
| IEC 61076-2-105:2008 | Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking |
| EN 175301-801:2006 | Detail Specification: High density rectangular connectors, round removable crimp contacts |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| EN 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| EN 61076-2-104:2014 | Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking |
| EN 60512-13-5:2006/corrigendum Dec. 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| 12/30264867 DC : 0 | BS EN 61076-2-104 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING |
| DD IEC/PAS 61076-2-110:2010 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s |
| BS EN 61076-2-106:2011 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| BS EN 61076-2-107:2010 | Connectors for electronic equipment. Product requirements Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
| 13/30231474 DC : 0 | BS EN 62196-3 ED 1.0 - PLUGS, SOCKET-OUTLETS AND VEHICLE COUPLERS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 3: DIMENSIONAL COMPATIBILITY AND INTERCHANGEABILITY REQUIREMENTS FOR D.C. AND A.C./D.C. PIN AND TUBE-TYPE CONTACT VEHICLE COUPLERS |
| BS EN 60598-2-21:2015 | Luminaires Particular requirements. Rope lights |
| BS EN 61076-2-105:2008 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M5 connectors with screw-locking |
| 16/30342256 DC : 0 | BS EN 50107-3 - PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| 02/203604 DC : DRAFT MAR 2002 | IEC 61810-1. ED.2 - ELEMENTARY RELAYS - PART 1: SAFETY-RELATED AND GENERAL REQUIREMENTS |
| DD IEC/PAS 61076-2-108:2009 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101 |
| S.R. HD 60364-5-537:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - DEVICES FOR PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING - CLAUSE 537: ISOLATION AND SWITCHING |
| DD IEC/PAS 61076-2-109:2010 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors M 12 × 1 with screw-locking, for data transmissions with frequencies up to 500 MHz |
| NF EN 50521 : 2009 AMD 1 2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| 12/30267896 DC : 0 | BS EN 60598-2-20 - LUMINAIRES - PART 2-20: PARTICULAR REQUIREMENTS - LIGHTING CHAINS |
| IEC PAS 61076-2-109:2010 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz |
| CEI EN 50467 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| CEI EN 61076-2-106 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| 10/30216372 DC : 0 | BS EN 61076-2-101 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
| 17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| EN 61076-2-113:2017 | Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| PREN 50467 : DRAFT 2009 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| CEI EN 61076-3-120 : 1ED 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTORS WITH SNAP LOCKING FOR RATED VOLTAGE OF 250 V D.C. AND RATED CURRENT OF 30 A |
| I.S. EN 16840:2017 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, 50 HZ, AT LEAST 250 A |
| BS EN 61810-1:2015 | Electromechanical elementary relays General and safety requirements |
| CEI EN 61810-1 : 2016 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 60512-13-5:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD |
| I.S. EN 62852:2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| I.S. EN 61076-2-105:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| NF EN 61076-2-105 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| IEC PAS 61076-3-126:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking |
| IEC 60204-33:2009 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| 15/30286839 DC : 0 | BS ISO 14990-3 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 3: PARTICULAR REQUIREMENTS FOR SELF-POWERED MACHINES |
| IEC 60512-13-5:2006 | Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method |
| 06/30154990 DC : 0 | BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| BS 7909:2008 | CODE OF PRACTICE FOR TEMPORARY ELECTRICAL SYSTEMS FOR ENTERTAINMENT AND RELATED PURPOSES |
| I.S. EN 61076-2-106:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| I.S. EN 61076-3-118:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| BS EN 16840:2017 | Inland navigation vessels. Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A |
| CEI EN 61076-2-107 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
| CEI EN 61076-3-118 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| 09/30203839 DC : 0 | BS EN 61730-1 - PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| BS EN 60512-13-5:2006 | Connectors for electronic equipment. Tests and measurements Mechanical operation tests. Test 13e. Polarizing and keying method |
| BS EN 61076-3:2008 | Connectors for electronic equipment. Product requirements Rectangular connectors. Sectional specification |
| BS EN 61076-3-118:2010 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for a 4 pole + PE power connector with push-pull coupling |
| 13/30274781 DC : 0 | BS EN 60598-2-21 - LUMINAIRES - PART 2-21: PARTICULAR REQUIREMENTS - SEALED LIGHTING CHAINS |
| DD CLC/TS 50467:2008 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| CEI EN 61812-1 : 2012 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| BS EN 175301-801:2006 | Detail specification. High density rectangular connectors, round removable crimp contacts |
| UNE-EN 61730-1:2007 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| BS EN 61076-3-120:2016 | Connectors for electronic equipment. Product requirements Rectangular connectors. Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| BS EN 61076-2-109:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| EN IEC 61076-2-111:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| BS EN 61076-2-101:2012 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for M12 connectors with screw-locking |
| I.S. EN 61076-2-109:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M 12 X 1 SCREW-LOCKING, FOR DATA TRANSMISSION FREQUENCIES UP TO 500 MHZ |
| I.S. EN 175301-801:2006 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| I.S. EN 1501-5:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| CEI EN 61076-2-105 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-105: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M5 CONNECTORS WITH SCREW-LOCKING |
| PREN 50107-3 : DRAFT 2016 | PRODUCT STANDARD COVERING LUMINOUS SIGNS WITH DISCHARGE LAMPS AND/OR LED (LIGHT EMITTING DIODES) AND/OR EL (ELECTROLUMINESCENT) LIGHTSOURCES WITH A NOMINAL VOLTAGE NOT EXCEEDING 1000 V, WITH THE EXCLUSION OF GENERAL LIGHTING, TRAFFIC- OR EMERGENCY RELATED PURPOSE |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| S.R. CLC/TS 50467:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
| NF EN 61810-1 : 2015 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
| IEC 61810-1:2015 | Electromechanical elementary relays - Part 1: General and safety requirements |
| UNE-EN 50521:2010 | Connectors for photovoltaic systems - Safety requirements and tests |
| UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| CEI EN 61076-2-113 : 1ED 2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
| 14/30311585 DC : 0 | BS EN 61076-3-120 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-120: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR REWIRABLE POWER CONNECTOR WITH SNAP LOCKING FOR 250 V D.C. AND RATED CURRENT OF 30A |
| NF EN 60598-2-21 : 2015 | LUMINAIRES - PART 2-21: PARTICULAR REQUIREMENTS - ROPE LIGHTS |
| 12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| IEC 61076-2-113:2017 | Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| UNI EN 1501-5 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| CEI EN 60947-7-4 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS |
| DIN EN 1501-5:2012-02 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| DD IEC PAS 61076-2-107 : DRAFT 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW-LOCKING |
| BS EN 1501-5:2011 | Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
| 14/30297577 DC : 0 | BS EN 61076-2-113 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH DATA AND POWER CONTACTS WITH M12 SCREW-LOCKING |
| 08/30195483 DC : 0 | BS EN 61812-1 - TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| UNE-EN 60947-7-4:2014 | Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors |
| I.S. EN 61076-2-101:2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING (IEC 61076-2-101:2012 (EQV)) |
| 13/30268325 DC : 0 | BS EN 61076-2-112 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 2-112: PRODUCT REQUIREMENTS - CIRCULAR CONNECTORS, DETAIL SPECIFICATION FOR M12 POWER CONNECTORS UP TO 12 AMPS WITH SCREW-LOCKING |
| EN IEC 61076-3-119:2018 | Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz |
| 11/30206085 DC : 0 | BS EN 60947-7-4 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PRINTED BOARD TERMINAL BLOCKS FOR COPPER CONDUCTORS |
| 08/30179153 DC : DRAFT MAR 2008 | BS EN 61076-3-118 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLES + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 60598-2-21:2015 | LUMINAIRES - PART 2-21: PARTICULAR REQUIREMENTS - ROPE LIGHTS |
| CSA C22.2 No. 61730-1 : 2011 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| EN 61810-1:2015/AC:2018-04 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018) |
| CEI EN 61076-3 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. EN 61076-2-104:2014 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-104: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CIRCULAR CONNECTORS WITH M8 SCREW-LOCKING OR SNAP-LOCKING |
| NF EN 61076-2-106 : 2012 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-106: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 16 X 0,75 WITH SCREW-LOCKING AND DEGREE OF PROTECTION IP40 OR IP65/67 |
| I.S. EN 61812-1:2011 | TIME RELAYS FOR INDUSTRIAL AND RESIDENTIAL USE - PART 1: REQUIREMENTS AND TESTS |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| BS EN 60947-7-4:2013 | Low-voltage switchgear and controlgear Ancillary equipment. PCB terminal blocks for copper conductors |
| UNE-EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| CEI EN 60512-13-5 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 13-5: MECHANICAL OPERATION TESTS - TEST 13E: POLARIZING AND KEYING METHOD |
| IEC PAS 61076-2-107:2007 | Connectors for electronic equipment - Product requirements - Part 2-107: Circular connectors - Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking |
| 12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
| IEC 61076-2-106:2011 | Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 |
| IEC 60598-2-20:2014 | Luminaires - Part 2-20: Particular requirements - Lighting chains |
| EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| 14/30238347 DC : 0 | BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| 08/30195018 DC : DRAFT DEC 2008 | BS EN 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| IEC 61076-2-107:2010 | Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
| CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| IEC 61076-2-109:2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz |
| IEC 60947-7-4:2013 | Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors |
| IEC 61076-2-101:2012 | Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
| IEC 61076-3-118:2010 | Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling |
| IEC 61076-2-104:2014 | Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking |
| BS EN 62852:2015 | Connectors for DC-application in photovoltaic systems. Safety requirements and tests |
| IEC 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| UNE-EN 60598-2-21:2015 | Luminaires - Part 2-21: Particular requirements - Rope lights |
| BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
| BS EN 50521 : 2009 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| IEC 61076-3-120:2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| 08/30179116 DC : DRAFT MAR 2008 | BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 60204-33:2011 | Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment |
| 07/30153021 DC : 0 | BS IEC 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| CLC/TS 50467 : 2008 COR 2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 16840:2017 | Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A |
| HD 60364-5-537:2016/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - DEVICES FOR PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING - CLAUSE 537: ISOLATION AND SWITCHING |
| 17/30340059 DC : 0 | BS EN 61076-3-119 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR UNSHIELDED, FREE AND FIXED 10 WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS WITH FREQUENCIES UP TO 100 MHZ |
| CEI EN 61076-2-101 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-101: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR M12 CONNECTORS WITH SCREW-LOCKING |
| NF EN 61076-2-107 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-107: DETAIL SPECIFICATION FOR CIRCULAR HYBRID CONNECTORS M12 WITH ELECTRICAL AND FIBRE-OPTIC CONTACTS WITH SCREW LOCKING |
| 10/30227785 DC : 0 | BS EN 61076-2-109 - CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-109: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS M 12 X 1 WITH SCREW-LOCKING, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 500 MHZ |
| BS EN 50467:2011 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| BS EN 60598-2-20:2015 | Luminaires Particular requirements. Lighting chains |
| UNE-EN 16840:2017 | Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz, at least 250 A |
| UNE-EN 60598-2-20:2015 | Luminaires - Part 2-20: Particular requirements - Lighting chains |
| BS EN 61076-2-113:2017 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz |
| BS EN 61076-2-104:2014 | Connectors for electronic equipment. Product requirements Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking |
| NF EN 61730-1 : 2007 AMD 11 2015 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| I.S. EN 61076-3:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
| CEI EN 175301-801 : 2007 | DETAIL SPECIFICATION: HIGH DENSITY RECTANGULAR CONNECTORS, ROUND REMOVABLE CRIMP CONTACTS |
| I.S. EN 50521:2008 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN IEC 61076-3-119:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ |
| I.S. EN IEC 61076-2-111:2018 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING |
| I.S. EN 61076-2-113:2017 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-113: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR CONNECTORS WITH M12 SCREW LOCKING WITH POWER AND SIGNAL CONTACTS FOR DATA TRANSMISSION WITH FREQUENCY UP TO 100 MHZ |
| NF EN 60598 2-20 : 2015 | LUMINAIRES - PART 2-20: PARTICULAR REQUIREMENTS - LIGHTING CHAINS |
| I.S. EN 60947-7-4:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013 (EQV)) |
| I.S. EN 60204-33:2011 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| IEC TR 62225:2001 | Guidance on terms for connectors and mechanical structures in electronic equipment |
| IEC PAS 61076-2-110:2010 | Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s |
| IEC PAS 61076-2-108:2009 | Connectors for electronic equipment - Product requirements - Part 2-108: Circular connectors - Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101 |
| IEC 62847:2016 | Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
| EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
| EN 60598-2-20:2015/AC:2017-01 | LUMINAIRES - PART 2-20: PARTICULAR REQUIREMENTS - LIGHTING CHAINS (IEC 60598-2-20:2014/COR1:2016) |
| IEC 61076-3:2008 | Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification |
| 02/203840 DC : DRAFT MAY 2002 | IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| 11/30258071 DC : 0 | BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 62852:2014 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| EN 61076-2-101:2012 | Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking |
| EN 50521:2008/A1:2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 61076-2-109:2014 | Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 × 1 screw-locking, for data transmission frequencies up to 500 MHz |
| EN 61076-3:2008 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3: RECTANGULAR CONNECTORS - SECTIONAL SPECIFICATION |
| EN 60598-2-21:2015/AC:2017-01 | LUMINAIRES - PART 2-21: PARTICULAR REQUIREMENTS - ROPE LIGHTS (IEC 60598-2-21:2014/COR1:2016) |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| EN 61076-2-107 : 2010 | Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking |
| EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 61076-2-105:2008 | Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking |
| EN 61076-3-120:2016 | Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A |
| EN 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| EN 60947-7-4 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013) |
| EN 61076-3-118 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-118: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR A 4 POLE + PE POWER CONNECTOR WITH PUSH-PULL COUPLING |
| UNE-HD 60364-5-537:2017 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection, isolation, switching, control and monitoring - Clause 537: Isolation and switching |
| CEI EN IEC 61800-5-1:2024 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
| IEC 60068-2-70:1995 | Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60352-6:1997 | Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IEC 60998-2-3:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
| IEC 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
| EN 50262 : 1998 AMD 2 2004 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| IEC 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| IEC 60664-5:2007 | Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60695-11-5:2016 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| IEC 60352-7:2002 | Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.