IEC 61010-2-040:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
12-31-2021
Superseded by
Language(s)
English - French
Published date
07-07-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Tests
5 Marking and documentation
6 Protection against electric shock
7 Protection against mechanical HAZARDS and
against HAZARDS related to mechanical functions
8 Mechanical resistance to shock and impact
9 Protection against the spread of fire
10 Equipment temperature limits and resistance
to heat
11 Protection against HAZARDS from fluids
12 Protection against radiation, including laser sources,
and against sonic and ultrasonic pressure
13 Protection against liberated gases, substances,
explosion and implosion
14 Components
15 Protection by interlocks
16 HAZARDS resulting from application
17 RISK assessment
Annexes
Annex G (informative) - Leakage and rupture from fluids
under pressure
Annex L (informative) - Index of defined terms
Bibliography
IEC 61010-2-040:2015 specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4. It has the status of a group safety publication, as specified in IEC Guide 104. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) A new clause (4.3.2.101) has been added for non-electrical supplies and services.
b) Additional requirements for marking and documentation (Clause 5) have been added.
c) Additional requirements for protection against mechanical hazards (Clause 7) have been included.
d) Additional requirements for protection against radiation, including laser sources, and against sonic and ultrasonic pressure (Clause 12) have been included.
| Committee |
TC 66
|
| DevelopmentNote |
Supersedes IEC 61010-2-041, IEC 61010-2-042, IEC 61010-2-043 and IEC 61010-2-045. (04/2005) Stability Date: 2017. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
75
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM OVE EN 61010-2-040 : 2016 | Identical |
| NF EN 61010 2-040 : 2015 | Identical |
| NBN EN 61010 2-040 : 2015 | Identical |
| NEN EN IEC 61010-2-040 : 2015 | Identical |
| I.S. EN 61010-2-040:2015 | Identical |
| CEI EN 61010-2-040 : 2016 | Identical |
| EN 61010-2-040:2015 | Identical |
| UNE-EN 61010-2-040:2015 | Identical |
| VDE 0411-2-040 : 2016 | Identical |
| PN EN 61010-2-040 : 2015 | Identical |
| UNE-EN 61010-2-040:2006 | Identical |
| BS EN 61010-2-040:2015 | Identical |
| PNE-FprEN 61010-2 -040 | Identical |
| DIN EN 61010-2-040 : 2016 | Identical |
| DIN EN ISO 25424:2011-09 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 11135-1:2007-08 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 15883-7 E : 2016 | WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016) |
| I.S. EN 15424:2007 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PD ISO/TS 17665-3:2013 | Sterilization of health care products. Moist heat Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| 04/30081258 DC : DRAFT MARCH 2004 | BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| AAMI ISO 17665-1 : 2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135 : 2015 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA ISO 14937 : 2011 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z17665-1:09 (R2019) | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (Adopted ISO 17665-1:2006, first edition, 2006-08-15, with Canadian deviations) |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z17665-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN 1422:2014-08 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| BS EN 15424:2007 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| NF EN 285 : 2016 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| DIN EN ISO 15883-4:2009-09 | WASHER-DISINFECTORS - PART 4: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR THERMOLABILE ENDOSCOPES |
| DIN EN 15424:2007-08 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| PREN 1422 : DRAFT 2011 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 15883-4:2016-07 (Draft) | WASHER-DISINFECTORS - PART 4: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR THERMOLABILE ENDOSCOPES |
| 12/30248648 DC : DRAFT AUG 2012 | BS EN 16442 - CONTROLLED ENVIRONMENT STORAGE CABINET FOR DISINFECTED THERMOLABILE ENDOSCOPES |
| AAMI ISO TIR 17665-3:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| 12/30262894 DC : 0 | BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN ISO 17665-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 15883-7:2016 | Washer-disinfectors Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment |
| 11/30252448 DC : 0 | BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| 12/30252545 DC : 0 | BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| 11/30244091 DC : 0 | BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CAN/CSA-ISO 15883-7:17 | Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (Adopted ISO 15883-7:2016, first edition, 2016-02-01) |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| 04/30048205 DC : DRAFT JUL 2004 | BS EN ISO 17665 - STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI ST55:2016 | TABLE-TOP STEAM STERILIZERS |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| UNI CEN ISO/TS 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| CSA Z17665-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 25424:2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI ST8:2013(R2018) | HOSPITAL STEAM STERILIZERS |
| ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| EN ISO 14937:2009 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| DIN EN ISO 17665-1:2006-11 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| ISO 25424:2009 | Sterilization of medical devices Low temperature steam and formaldehyde Requirements for development, validation and routine control of a sterilization process for medical devices |
| I.S. EN ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 1422:2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 1422:1997-11 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 60335-2-58 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| UNI EN ISO 25424 : 2011 | STERILIZATION OF MEDICAL DEVICES - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 09/30196750 DC : DRAFT MAY 2009 | BS EN ISO 15883-6 - WASHER-DISINFECTORS - PART 6: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR NONINVASIVE, NON-CRITICAL MEDICAL DEVICES AND HEALTHCARE EQUIPMENT |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN ISO 15883-4:2009 | Washer-disinfectors Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes |
| 17/30338806 DC : 0 | BS EN ISO 25424 - STERILIZATION OF HEALTH CARE PRODUCTS - LOW TEMPERATURE STEAM AND FORMALDEHYDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z15883-4 : 2009 | Washer-disinfectors — Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2008, IDT) |
| CSA ISO 14937 : 2011 : R2016 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 15883-4:2008 | Washer-disinfectors Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes |
| CSA Z17665-2:09 (R2019) | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009, IDT) |
| AAMI ISO 14937:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ANSI/AAMI ISO 17665-1:2006(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| EN 13060:2014 | Small steam sterilizers |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| I.S. EN ISO 15883-7:2016 | WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016) |
| BS EN ISO 15883-6:2015 | Washer-disinfectors Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment |
| DIN EN ISO 15883-6:2016-04 | Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment (ISO 15883-6:2011) |
| AAMI ST15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS |
| ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| IEC 60335-2-58:2017 | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| ISO 15883-1:2006 | Washer-disinfectors Part 1: General requirements, terms and definitions and tests |
| IEC 60335-2-58:2017 RLV | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines |
| I.S. EN ISO 15883-1:2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| UNI EN ISO 14937 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| UNI EN 1422 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| BS EN ISO 25424:2011 | Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices |
| UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| ISO 15883-7:2016 | Washer-disinfectors — Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment |
| AAMI ISO TIR 17665-2 : 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| I.S. EN ISO 11135-1:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 16/30288024 DC : 0 | BS EN ISO 15883-4 - WASHER-DISINFECTORS - PART 4: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR THERMOLABILE ENDOSCOPES |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| I.S. EN ISO 20857:2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 20857:2010) |
| 07/30164697 DC : 0 | ISO 20857 - STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI ST15883-3 : 2012 | WASHER-DISINFECTORS - PART 3: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR HUMAN WASTE CONTAINERS |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| I.S. EN ISO 15883-4:2009 | WASHER-DISINFECTORS - PART 4: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR THERMOLABILE ENDOSCOPES |
| AAMI/ISO TIR17665-2:2009(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ANSI/AAMI/ISO 17665-1 |
| UNI EN ISO 15883-4 : 2009 | WASHER-DISINFECTORS - PART 4: REQUIREMENTS AND TESTS FOR WASHER- DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR THERMOLABILE ENDOSCOPES |
| UNE-EN ISO 15883-6:2015 | Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment (ISO 15883-6:2011) |
| PREN ISO 15883-6 : DRAFT 2009 | WASHER-DISINFECTORS - PART 6: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR NONINVASIVE, NON-CRITICAL MEDICAL DEVICES AND HEALTHCARE EQUIPMENT |
| EN ISO 15883-4:2009 | Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO 15883-4:2008) |
| I.S. EN 60335-2-58:2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES |
| UNE-EN ISO 15883-1:2009 | Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006) |
| DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 17665-1:2006 | Sterilization of health care products. Moist heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN ISO 14937:2009 | Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| ANSI/AAMI ST15883-2:2013(R2015) (ISO 15883-2:2006 MOD) | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
| UNE-EN ISO 14937:2010 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| BS EN ISO 15883-1 : 2009 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006) |
| EN ISO 15883-7:2016 | Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016) |
| EN 15424:2007 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| EN ISO 11135-1:2007 | Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) |
| EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| EN ISO 15883-6:2015 | Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment (ISO 15883-6:2011) |
| EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN ISO 17665-1:2006 | Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006) |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ANSI/AAMI/ISO 14937:2009(R2013) | STERILIZATION OF HEALTH CARE PRODUCTS - GENERAL REQUIREMENTS FOR CHARACTERIZATION OF A STERILIZING AGENT AND THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 15883-7:2016-10 | WASHER-DISINFECTORS - PART 7: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR NON-INVASIVE, NON-CRITICAL THERMOLABILE MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-7:2016) |
| PREN ISO 11135 : DRAFT 2011 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO/DIS 11135:2011) |
| DD CEN ISO/TS 17665-2:2009 | Sterilization of health care products. Moist heat Guidance on the application of ISO 17665-1 |
| CAN/CSA-ISO 15883-6:17 | Washer-disinfectors — Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive , non-critical medical devices and healthcare equipment (Adopted ISO 15883-6:2011, first edition, 2011-04-15) |
| CSA Z17665-2 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| S.R. CEN ISO TS 17665-2:2009 | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - PART 2: GUIDANCE ON THE APPLICATION OF ISO 17665-1 |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| AAMI ISO 20857 : 2010 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| AAMI/ISO TIR17665-3:2014(R2016) | STERILIZATION OF HEALTH CARE PRODUCTS - MOIST HEAT - GUIDANCE ON THE DESIGNATION OF A MEDICAL PRODUCT TO A PRODUCT FAMILY AND PROCESSING CATEGORY FOR STEAM STERILIZATION |
| UNE-EN ISO 15883-7:2016 | Washer-disinfectors - Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO 15883-7:2016) |
| AAMI ST15883-2 : 2013 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| CSA Z15883-4 : 2009 : R2014 | WASHER-DISINFECTORS - PART 4: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING CHEMICAL DISINFECTION FOR THERMOLABILE ENDOSCOPES |
| UNE-EN 13060:2015 | Small steam sterilizers |
| UNE-EN ISO 25424:2011 | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) |
| I.S. EN ISO 15883-6:2015 | WASHER-DISINFECTORS - PART 6: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR NONINVASIVE, NON-CRITICAL MEDICAL DEVICES AND HEALTHCARE EQUIPMENT (ISO 15883-6:2011) |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 15883-1:2014-10 | WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014) |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| BS EN 1422:2014 | Sterilizers for medical purposes. Ethylene oxide sterilizers. Requirements and test methods |
| BS EN ISO 11135-1:2007 | Sterilization of health care products. Ethylene oxide Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
| ISO 15883-6:2011 | Washer-disinfectors — Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| DIN EN ISO 14937:2010-03 | Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) |
| CEN ISO/TS 17665-2:2009 | Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) |
| EN 60335-2-58:2005/A12:2016 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES (IEC 60335-2-58:2002, MODIFIED) |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| IEC 60335-2-11:2008+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-11:Particular requirements for tumble dryers |
| ISO 2903:2016 | ISO metric trapezoidal screw threads — Tolerances |
| ISO 15223-2:2010 | Medical devices — Symbols to be used with medical device labels, labelling, and information to be supplied — Part 2: Symbol development, selection and validation |
| ISO 2904:1977 | ISO metric trapezoidal screw threads — Basic dimensions |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 3585:1998 | Borosilicate glass 3.3 — Properties |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| IEC TR 62471-2:2009 | Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety |
| IEC 60335-2-7:2008+AMD1:2011+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-7:Particular requirements for washing machines |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| IEC 62304:2006+AMD1:2015 CSV | Medical device software - Software life cycle processes |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| ISO 2902:2016 | ISO metric trapezoidal screw threads General plan |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| IEC 60335-2-5:2012 | Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| EN 14222:2003 | Stainless steel shell boilers |
| IEC 61010-2-010:2014 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| IEC 61770:2008+AMD1:2015 CSV | Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-sets |
| ISO 2901:2016 | ISO metric trapezoidal screw threads Basic and design profiles |
| IEC 60335-2-58:2002+AMD1:2008+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.