IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
09-28-2021
Superseded by
Language(s)
English - French
Published date
07-27-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
IEC 60947-3:2008+A1:2012+A2:2015 applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor circuits of which the rated voltage does not exceed 1 000 V a.c. or 1 500 V d.c. The manufacturer shall specify the type, ratings and characteristics according to the relevant standard of any incorporated fuses. The technical content is therefore identical to the base edition and its amendment and has been prepared for user convenience. A vertical line in the margin shows where the base publication has been modified by amendment 1. Additions and deletions are displayed in red, with deletions being struck through. The contents of the corrigenda of September 2012 and of November 2013 have been included in this copy. This consolidated version consists of the third edition (2008), its amendment 1 (2012) and its amendment 2 (2015). Therefore, no need to order amendments in addition to this publication.
This publication is to be read in conjunction with IEC 60947-1:2011.
| Committee |
TC 121/SC 121A
|
| DevelopmentNote |
To be read in conjunction with IEC 60947-1. (01/2004) Stability date: 2017. (07/2015)
|
| DocumentType |
Standard
|
| Pages |
284
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| OVE/ONORM EN 60947-3 : 2013 AC 2015 | Identical |
| UNE-EN 60947-3:2009 | Identical |
| AS/NZS IEC 60947.3:2015 | Identical |
| NF EN 60947-3 : 2009 AMD 2 2015 | Identical |
| VDE 0660-107 : 2017 | Identical |
| DIN EN 60947-3 : 2017 | Identical |
| BS EN 60947-3 : 2009 | Identical |
| NEN EN IEC 60947-3 : 2009 AMD 2 2015 | Identical |
| EN 60947-3:2009/A2:2015 | Identical |
| BIS IS/IEC 60947-3 : 1999 | Identical |
| PN EN 60947-3 : 2009 AMD 2 2015 | Identical |
| SN EN 60947-3 : 1999 AMD 1 2001 | Identical |
| SAC GB 14048.3 : 2002 | Identical |
| NEN 10947-3 : 95 C1 97 | Identical |
| BS EN 62475:2010 | High-current test techniques. Definitions and requirements for test currents and measuring systems |
| 13/30289140 DC : 0 | BS EN 60364-9-1 ED 1.0 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 9-1: INSTALLATION DESIGN AND,,SAFETY REQUIREMENTS FOR PHOTOVOLTAIC POWER SYSTEMS (PV) |
| UNE-HD 50573-5-57:2014 | Co-ordination of electrical equipment for protection, isolation, switching and control |
| 04/30111859 DC : 0 | IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS |
| BS EN 62040-5-3:2017 | Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements |
| 14/30278956 DC : 0 | BS ISO 17842-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
| BS EN 61439-2:2011 | Low-voltage switchgear and controlgear assemblies Power switchgear and controlgear assemblies |
| CEI EN 62475 : 2011 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
| S.R. HD 60364-5-537:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - DEVICES FOR PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING - CLAUSE 537: ISOLATION AND SWITCHING |
| 10/30227671 DC : 0 | BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| I.S. EN 61439-2:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011) |
| CSA C22.2 No. 61010.1 : 2012 : FR | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| IEC 61892-3:2012 | Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
| IEC 62683-1:2017 | Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| I.S. EN 62683-1:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE - PART 1: CATALOGUE DATA |
| I.S. EN 60309-1:1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 (EQV)) |
| CEI EN 60601-2-22 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT |
| I.S. EN 60269-1:2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 62683-1:2017 | Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data |
| EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| I.S. EN 61241-1:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| BS EN 60947-2:2017 | Low-voltage switchgear and controlgear Circuit-breakers |
| CSA C22.2 No. 61980-1 : 2016 | ELECTRIC VEHICLE WIRELESS POWER TRANSFER (WPT) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| ISO 20898:2008 | Industrial trucks — Electrical requirements |
| 17/30338554 DC : 0 | BS EN 1175 - SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS |
| BS EN IEC 61204-7:2018 | Low-voltage switch mode power supplies Safety requirements |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| 15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| CLC/TR 60269-5:2011 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
| EN 60269-1:2007/A2:2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
| EN 60947-6-1:2005/A1:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT (IEC 60947-6-1:2005/A1:2013) |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| EN 62626-1:2014 | Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work |
| EN 61241-1:2004/corrigendum Dec. 2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| EN 62040-5-3:2017 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| EN 1175-1:1998+A1:2010 | Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN 62683:2015 | Low-voltage switchgear and controlgear - Product data and properties for information exchange |
| HD 60364-4-43:2010 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| EN 62475 : 2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
| DIN EN 14678-3:2013-03 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
| BS EN 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\' |
| BS EN 45510-2-7:2002 | Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear |
| I.S. EN 62626-1:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ENCLOSED EQUIPMENT - PART 1: ENCLOSED SWITCH-DISCONNECTORS OUTSIDE THE SCOPE OF IEC 60947-3 TO PROVIDE ISOLATION DURING REPAIR AND MAINTENANCE WORK |
| 10/30233953 DC : 0 | BS EN 16191 - TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| 02/204778 DC : DRAFT JULY 2002 | IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| 10/30202620 DC : 0 | BS EN 62626-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR - ENCLOSED SWITCH FOR VARIOUS APPLICATIONS TO PROVIDE ISOLATION OF ELECTRICAL EQUIPMENT DURING REPAIR AND MAINTENANCE WORK |
| BS EN 14678-3:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises |
| NF EN 60309-1 : 1999 AMD 2 2013 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 03/118895 DC : 0 | EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| CEI UNI EN 45510-2-7 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| EN IEC 61204-7:2018 | Low-voltage switch mode power supplies - Part 7: Safety requirements |
| BS EN 60269-1 : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| CEI UNI EN 45510-2-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS |
| EN 60947-2:2017 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| I.S. EN 60601-2-57:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
| I.S. EN 50156-1:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| I.S. EN 62040-5-3:2017 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS |
| I.S. EN 62683:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE |
| S.R. HD 60364-7-712:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-712: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - PHOTOVOLTAIC (PV) SYSTEMS |
| NF EN 61010-1 : 2011 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 62626-1:2014 | Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| IEC TR 61912-1:2007 | Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| I.S. EN 62040-3:2011 | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| IEC 60204-33:2009 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| IEC 60364-7-712:2017 | Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
| DIN EN 13617-1:2012-08 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| BS EN 1175-1 : 1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| 17/30354643 DC : 0 | BS EN 62933-2-1 - ELECTRIC ENERGY STORAGE (ESS) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
| 06/30154990 DC : 0 | BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| I.S. EN 14678-1:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| IEC 60947-2:2016 RLV | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| I.S. EN 13617-1:2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| I.S. EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| 02/211967 DC : DRAFT DEC 2002 | IEC 61204-7 ED.1 - LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS |
| BS EN 60601-2-57:2011 | Medical electrical equipment Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
| PREN 13617-1 : DRAFT 2010 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| BS EN 62626-1:2014 | Low-voltage switchgear and controlgear enclosed equipment Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work |
| BS ISO 20898:2008 | Industrial trucks. Electrical requirements |
| 10/30219405 DC : 0 | BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| 14/30297921 DC : 0 | BS EN 62040-5-3 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS FOR D.C. UPS |
| I.S. HD 50573-5-57:2014 | CO-ORDINATION OF ELECTRICAL EQUIPMENT FOR PROTECTION, ISOLATION, SWITCHING AND CONTROL |
| CEI EN 61439-2 : 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES |
| 07/30165742 DC : 0 | BS EN 60947-4-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| BS EN 60601-2-22:2013 | Medical electrical equipment Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| IEC TR 63054:2017 | Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures |
| 18/30371712 DC | BS EN 60947-6-1. Low-voltage switchgear and controlgear Part 6-1. Multiple function equipment. Transfer switching equipment |
| 16/30301665 DC : 0 | BS EN 61439-2 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES |
| 10/30232643 DC : 0 | BS EN 62613-1 - HIGH-VOLTAGE PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS |
| ISA S82.01 : 1994 | ELECTRICAL AND ELECTRONIC TEST, MEASURING, CONTROLLING AND RELATED EQUIPMENT - GENERAL REQUIREMENTS |
| DD IEC/TS 62091:2003 | Low-voltage switchgear and controlgear. Controllers for drivers of stationary fire pumps |
| PREN 16191 : DRAFT 2010 | TUNNELLING MACHINERY - SAFETY REQUIREMENTS |
| EN 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| IEC TR 60269-5:2014 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
| EN IEC 62933-2-1:2018 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| BS EN 62040-3:2011 | Uninterruptible power systems (UPS) Method of specifying the performance and test requirements |
| BS EN 62271-1:2017 | High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear |
| I.S. EN IEC 62933-2-1:2018 | ELECTRICAL ENERGY STORAGE (EES) SYSTEMS - PART 2-1: UNIT PARAMETERS AND TESTING METHODS - GENERAL SPECIFICATION |
| I.S. EN 60947-2:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS |
| I.S. EN IEC 61204-7:2018 | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| BIS IS/IEC 62271-1 : 2007 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS |
| CSA C22.2 No. 60601-2-57:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
| UNI EN 14678-3 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
| CAN/CSA-C22.2 NO. 61010-1-12 (R2017) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
| ISO 17842-2:2015 | Safety of amusement rides and amusement devices Part 2: Operation and use |
| I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| I.S. EN 61010-1:2010/A1:2019 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| IEC 61204-7:2016 EXV | LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
| IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
| I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 62933-2-1:2017 | Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testing methods - General specification |
| NF EN 61851-1 : 2012 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| UNE-HD 60364-7-712:2017 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| UNE-EN 60947-4-1:2011 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| 18/30375223 DC | BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads |
| UNE-EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
| UNE-EN 61010-1:2011 | Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
| EN 60601-2-22:2013 | Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| UNE-HD 60364-5-53:2016 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Switchgear and controlgear |
| ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| UNI EN 13617-1 : 2012 | PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS |
| EN 14678-1:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| UNI EN 1175-1 : 2010 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS - PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS |
| UNI EN 14678-1 : 2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| NF EN 62626-1 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ENCLOSED EQUIPMENT - PART 1: ENCLOSED SWITCH-DISCONNECTORS OUTSIDE THE SCOPE OF IEC 60947-3 TO PROVIDE ISOLATION DURING REPAIR AND MAINTENANCE WORK |
| NF EN 61439-2 : 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES |
| PREN 14678-1 : DRAFT 2010 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS |
| PREN 1175 : DRAFT 2017 | SAFETY OF INDUSTRIAL TRUCKS - ELECTRICAL/ELECTRONIC REQUIREMENTS |
| S.R. CLC/TR 60269-5:2011 | LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| 04/30121678 DC : DRAFT AUG 2004 | |
| IEC TS 62091:2003 | Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps |
| PD IEC/TR 61912:2006 | Application of the short-circuit ratings of low-voltage switchgear and controlgear |
| 09/30204033 DC : 0 | BS EN 61439-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES |
| 07/30168572 DC : 0 | BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 61439-2:2012 | Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies |
| 09/30165797 DC : 0 | BS EN 60601-2-57 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
| DIN VDE 0660-102 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| CSA C22.2 NO. 60947-4-1:14 (R2019) | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1) |
| UNI CEI EN 45510-2-7 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| IEC TR 61818:2003 | Application guide for low-voltage fuses |
| S.R. HD 60364-5-53:2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| I.S. EN 60947-6-1:2005 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT |
| I.S. EN 60601-2-22:2013 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT (IEC 60601-2-22:2007 (EQV) + A1:2012 (EQV)) |
| ISA 61241-1 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD" |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| I.S. EN 60947-7-2:2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-2: ANCILLARY EQUIPMENT - PROTECTIVE CONDUCTOR TERMINAL BLOCKS FOR COPPER CONDUCTORS |
| BS EN 62683:2015 | Low-voltage switchgear and controlgear. Product data and properties for information exchange |
| CEI 13-26 : 1999 | WATT-HOUR METERS AND POWER LIMITERS FOR LOW-VOLTAGE NETWORKS (INTEGRATED UNITS) PERMITTED OR NOT FOR PROCESSING AND REMOTE MANAGEMENT OF DATA |
| CEI UNI EN 45510-2-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS |
| I.S. EN 61010-1:2010 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| IEC 62040-1:2017 EXV | UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: SAFETY REQUIREMENTS |
| IEC PAS 63108:2017 | Electrical installation in ships - Primary DC distribution - System design architecture |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| I.S. HD 60364-4-43:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
| I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| IEC 61439-2:2011 | Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| BS PD88-5(2010) : 2010 | LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES |
| PD IEC/TS 62548:2013 | Photovoltaic (PV) arrays. Design requirements |
| 07/30169755 DC : 0 | BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING |
| IEC 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD" |
| BS EN 60947-2:2017+A1:2020 | Low-voltage switchgear and controlgear Circuit-breakers |
| IEC TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children |
| 15/30297990 DC : 0 | BS EN 62840-2 ED 1.0 - ELECTRIC VEHICLE BATTERY SWAP SYSTEM - PART 2: SAFETY REQUIREMENTS |
| BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
| 14/30238347 DC : 0 | BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| 08/30195018 DC : DRAFT DEC 2008 | BS EN 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| BS EN 13617-1:2012 | Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| 08/30185258 DC : DRAFT JULY 2008 | BS EN 60269-5 - LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES |
| UNE-EN 1175-1:1998 | SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 1: GENERAL REQUIREMENTS FOR BATTERY POWERED TRUCKS. |
| IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV | Low-voltage fuses - Part 1: General requirements |
| 13/30292412 DC : 0 | BS EN 62683 - PRODUCT DATA AND PROPERTIES FOR INFORMATION EXCHANGE |
| IEC 62040-5-3:2016 | Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements |
| IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| IEC 60601-2-22:2007+AMD1:2012 CSV | Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
| UNE-EN 60601-2-57:2012 | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
| UNE-EN 13617-1:2012 | Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| IEC 62475:2010 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| IEC 62040-3:2011 | Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements |
| IEC 60601-2-57:2011 | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 60947-6-1:2005+AMD1:2013 CSV | Low-voltage switchgear and controlgear - Part 6-1: Multiple functionequipment - Transfer switching equipment |
| BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| BS EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation |
| BS EN 60204-33:2011 | Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment |
| 15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
| 10/30230568 DC : 0 | BS EN 61892-3 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
| BS IEC 62548:2016 | Photovoltaic (PV) arrays. Design requirements |
| UNE-HD 60364-4-43:2013 | Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent |
| 12/30260546 DC : 0 | BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| 07/30153021 DC : 0 | BS IEC 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| EN 45510-2-7:2002 | Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear |
| EN 14678-3:2013 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises |
| HD 60364-5-537:2016/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - DEVICES FOR PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING - CLAUSE 537: ISOLATION AND SWITCHING |
| BS EN 60947-4-1 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| PD IEC/TR 63054:2017 | Low-voltage switchgear and controlgear. Fire risk analysis and risk reduction measures |
| 06/30151625 DC : DRAFT JUN 2006 | BS IEC TR 61912-1 - APPLICATION OF THE SHORT-CIRCUIT RATINGS OF LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR |
| BS EN 62683-1:2017 | Low-voltage switchgear and controlgear. Product data and properties for information exchange Catalogue data |
| 16/30328756 DC : 0 | BS EN 13814-2 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 2: OPERATION, MAINTENANCE AND USE |
| 02/205209 DC : DRAFT JULY 2002 | IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD' |
| 15/30314469 DC : 0 | BS EN 62548 ED.1 - PHOTOVOLTAIC (PV) ARRAYS - DESIGN REQUIREMENTS |
| 15/30265353 DC : 0 | BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| CSA C22.2 No. 60601-2-57 : 2011 : R2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-57: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF NON-LASER LIGHT SOURCE EQUIPMENT INTENDED FOR THERAPEUTIC, DIAGNOSTIC, MONITORING AND COSMETIC/AESTHETIC USE |
| 05/30135633 DC : DRAFT JUN 2005 | IEC 60269-1 ED 4 - LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| EN 61439-2:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011) |
| BS ISO 17842-2:2015 | Safety of amusement rides and amusement devices Operation and use |
| BIS IS/ISO 12643-1 : 2009 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 15/30329828 DC : 0 | BS EN 60601-2-22 ED 4.0 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL; COSMETIC; THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT |
| PD IEC/TR 61912-1:2007 | Low-voltage switchgear and controlgear. Overcurrent protective devices Application of short-circuit ratings |
| 07/30169774 DC : 0 | BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING |
| BS IEC 61892-3:2012 | Mobile and fixed offshore units. Electrical installations Equipment |
| UNE-EN 62683:2016 | Low-voltage switchgear and controlgear - Product data and properties for information exchange |
| CSA C22.2 No. 61010.1 :2012 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| 03/311404 DC : 0 | IEC 61010-1 ED.3 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 62475:2012 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| UNE-EN 60947-6-1:2006 | Low-voltage switchgear and controlgear -- Part 6-1: Multiple function equipment - Transfer switching equipment (IEC 60947-6-1:2005) |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62475:2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
| I.S. EN 14678-3:2013 | LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES |
| UNI ISO 20898 : 2009 | INDUSTRIAL TRUCKS - ELECTRICAL REQUIREMENTS |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| CEI UNI EN 45510-2-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES |
| BS EN 60309-1 : 1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60947-4-1:2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 (EQV)) |
| BS EN 60947-6-1:2005 | Low-voltage switchgear and controlgear Multiple function equipment. Transfer switching equipment |
| HD 50573-5-57:2014 | Co-ordination of electrical equipment for protection, isolation, switching and control |
| BIS IS/IEC 60947-4-1 : 2000 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| IEC 62091:2007 | Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps |
| IEC 62840-2:2016 | Electric vehicle battery swap system - Part 2: Safety requirements |
| I.S. EN 60204-33:2011 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT |
| I.S. EN 62271-1:2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
| DIN EN 14678-1:2013-06 | LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers |
| CEI 32-18 : 2005 | APPLICATION GUIDE FOR LOW-VOLTAGE FUSES |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| IEC 62626-1:2014 | Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work |
| PD IEC/TR 60269-5:2010 | Low-voltage fuses Guidance for the application of low-voltage fuses |
| 02/203840 DC : DRAFT MAY 2002 | IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| BS EN 45510-2-2:1999 | Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants |
| BS EN 14678-1:2013 | LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers |
| PD IEC/TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
| BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| EN 60309-1:1999/A1:2007/AC:2014 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012) |
| HD 60364-5-53:2015/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| EN 60947-7-2:2009 | Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |
| EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
| HD 60364-7-712:2016 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| IEC 60364-7-712:2017 RLV | Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 60204-33:2011 | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| EN 60601-2-57:2011 | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
| CEI 18-58 : 2013 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| CSA C22.2 No. 60601.2.22 : 2008 : R2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT |
| UNE-HD 60364-5-537:2017 | Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection, isolation, switching, control and monitoring - Clause 537: Isolation and switching |
| CSA C22.2 No. 60601.2.22 : 2008 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT |
| BS 88-1(2007) : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60601.2.22 : 2008 : INC : AMD 1 : 2014 : R201400 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-22: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SURGICAL, COSMETIC, THERAPEUTIC AND DIAGNOSTIC LASER EQUIPMENT |
| IEC 60364-7-712:2017 | Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| IEC TR 60664-2-1:2011 | Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.