• There are no items in your cart

IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-31-2021

Superseded by

IEC 60825-2:2021

Language(s)

English, English - French

Published date

12-14-2010

US$625.00
Excluding Tax where applicable

FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Requirements
Annex A (informative) - Rationale
Annex B (informative) - Summary of requirements at
        locations in OFCS
Annex C (informative) - Methods of hazard/safety
        analysis
Annex D (informative) - Application notes for the
        safe use of OFCS
Annex E (informative) - Guidance for service and
        maintenance
Annex F (informative) - Clarification of the meaning
        of 'hazard level'
Bibliography

IEC 60825-2:2004+A1:2006+A2:2010 Provides requirements and specific guidance for the safe operation and maintenance of optical fibre communication systems (OFCS). In these systems optical power may be accessible outside the confinements of transmitting equipment or at great distance from the optical source. This Part 2 requires the assessment of hazard levels at accessible locations as a replacement for classification according to IEC 60825-1. It applies to the complete installed end-to-end OFCS, including its components and subassemblies that generate or amplify optical radiation. Individual components and subassemblies that are sold only to OEM vendors for incorporation into a complete installed end-to-end OFCS need not be assessed to this standard, since the final OFCS should itself be assessed according to this standard. The objective of this Part 2 of IEC 60825 is to:
- protect people from optical radiation resulting from OFCS;
- provide requirements for manufacturers, installation organizations, service organizations and operating organizations in order to establish procedures and supply information so that proper precautions can be adopted;
- ensure adequate warnings are provided to individuals regarding the potential hazards associated with OFCS through the use of signs, labels and instructions. This consolidated version consists of the third edition (2004), its amendment 1 (2006), its amendment 2 (2010), interpretation sheet 1 (2008) and 2 (2018). Therefore, no need to order amendments in addition to this publication.

Committee
TC 76
DevelopmentNote
Stability Date: 2017. (09/2017)
DocumentType
Standard
Pages
114
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes
UnderRevision

BS EN 50411-3-8:2016 Fibre organizers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, terminal equipment box type 1 for category C
02/205755 DC : DRAFT MAY 2002 IEC TR 62324. ED.1 - RAMAN GAIN EFFICIENCY MEASUREMENT OF SINGLE-MODE OPTICAL FIBRES USING CONTINUOUS WAVE METHOD - GUIDANCE
BS EN 61290-2-2:1998 Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Electrical spectrum analyzer
ANSI INCITS 338 : 2003 HIGH-PERFORMANCE PARALLEL INTERFACE - 6400 MBIT/S OPTICAL SPECIFICATION (HIPPI-6400-OPT)
I.S. EN 61290-3-2:2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
14/30296823 DC : 0 BS EN 61300-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
EN 60728-11:2017 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
05/30140924 DC : DRAFT OCT 2005 IEC 62324 TR - SINGLE-MODE OPTICAL FIBRES - RAMAN GAIN EFFICIENCY MEASUREMENT USING CONTINUOUS WAVE METHOD - GUIDANCE
BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
BS EN 61291-1:2012 Optical amplifiers Generic specification
PREN ISO 80601-2-61 : DRAFT 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
08/30175854 DC : DRAFT JAN 2008 IEC 61746-2 ED1 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
CEI CLC/TR 50510 : 2013 FIBRE OPTIC ACCESS TO END-USER - A GUIDELINE TO BUILDING OF FTTX FIBRE OPTIC NETWORK
04/30115144 DC : DRAFT JUN 2004 IEC 60793-1-49 - OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
BS EN 50700:2014 Information technology. Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks
CEI EN 62522 : 2014 CALIBRATION OF TUNEABLE LASER SOURCES
09/30211785 DC : 0 BS ISO/IEC 14763-2 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 2: PLANNING AND INSTALLATION
BS EN 61758-1:2008 Fibre optic interconnecting devices and passive components. Interface standard for closures General and guidance
12/30258880 DC : 0 BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
BS EN 61300-1:2016 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures General and guidance
BS EN 61280-4-1:2009 Fibre optic communication subsystem test procedures Installed cable plant. Multimode attenuation measurement
I.S. EN 61290-5-2:2004 OPTICAL AMPLIFIERS - TEST METHODS - PART 5-2: REFLECTANCE PARAMETERS - ELECTRICAL SPECTRUM ANALYSER METHOD
BS EN 62148-17:2014 Fibre optic active components and devices. Package and interface standards Transmitter and receiver components with dual coaxial RF connectors
BS EN 61290-2-1:1998 Optical fibre amplifiers. Basic specification Test methods for optical power parameters. Optical spectrum analyzer
BS EN 186260:1998 Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables. Type SC
PD CLC/TR 50510:2012 Fibre optic access to end-user. A guideline to building of FTTX fibre optic network
BS EN 62150-1:2005 Fibre optic active components and devices. Test and measurement procedures General and guidance
07/30170378 DC : DRAFT AUG 2007 BS EN 61290-10-1 - OPTICAL AMPLIFIER TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
03/306253 DC : DRAFT MAY 2003 IEC 60728-11 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY REQUIREMENTS
CSA Z9919 : 2007 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
I.S. EN 62522:2014 CALIBRATION OF TUNEABLE LASER SOURCES
BS EN 60728-11:2017 Cable networks for television signals, sound signals and interactive services Safety
I.S. EN 61280-4-2:2014 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
I.S. EN IEC 61291-1:2018 OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION
I.S. EN 60728-14:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY
ISO/IEC 14763-2:2012 Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation
BS EN 50174-3 : 2013 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
ISO/IEC 14763-3:2014 Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
IEC 62496-4:2011 Optical circuit boards - Part 4: Interface standards - General and guidance
EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
EN 186170 : 1998 SECTIONAL SPECIFICATION - CONNECTORS SETS FOR OPTICAL FIBRES AND CABLES - TYPE RCC
EN 62496-1:2009 Optical circuit boards - Part 1: General
EN 50411-3-5:2015 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-5: Wall outlet
EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
EN 61758-1:2008 Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance
EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
EN 61280-4-1:2009 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
EN 62300:2005 Consumer audio/video equipment digital interface with plastic optical fibre
EN 62148-17:2014 Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
EN 50700:2014 Information technology - Premises distribution access network (PDAN) cabling to support deployment of optical broadband networks
EN 50411-3-8:2016 Fibre organizers and closures to be used in optical fibre communication systems - Product specifications - Part 3-8: Fibre management system, terminal equipment box type 1 for category C
EN 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
EN 60793-1-49:2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
EN 61290-1:2015 Optical amplifiers - Test methods - Part 1: Power and gain parameters
EN 62129:2006/corrigendum:2006 CALIBRATION OF OPTICAL SPECTRUM ANALYZERS
EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
EN 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
EN 62129-2 : 2011 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
EN 186260:1997 Sectional Specification: Connector sets for optical fibres and cables - Type SC
BS EN 61280-4-2:2014 Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement
IEC TS 60825-7:2000 Safety of laser products - Part 7: Safety of products emitting infrared optical radiation, exclusively used for wireless 'free air' data transmission and surveillance
CEI EN 61290-11-2 : 2006 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD
CEI EN 62496-1 : 2010 OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
BS EN 61290-3-2:2008 Optical amplifiers. Test methods Noise figure parameters. Electrical spectrum analyzer method
13/30285534 DC : 0 BS EN 61290-1 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1: OPTICAL POWER AND GAIN PARAMETERS
PD IEC/TR 62324:2007 Single-mode optical fibres. Raman gain efficiency measurement using continuous wave method. Guidance
PD IEC/TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments Optical frequency meters using optical frequency combs
PD IEC TR 61282-1:2000 Fibre optic communication system design guides Single-mode digital and analogue systems
03/311628 DC : DRAFT AUG 2003 IEC 62150-1 ED.1.0 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
CEI EN 62150-1 : 2005 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
BS EN 61290-5-2:2004 Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Electrical spectrum analyser method
12/30265031 DC : 0 BS EN 60825-12 ED.2 - SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
PD IEC/TR 61292-6:2010 Optical amplifiers Distributed Raman amplification
BS EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures Examinations and measurements. Visual inspection of fibre optic connectors and fibre-stub transceivers
11/30246243 DC : 0 BS EN 62148-17 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS
08/30175850 DC : DRAFT JAN 2008 BS IEC 61746-1 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES
BS EN 61290-5-3:2002 Optical fibre amplifiers. Basic specification. Test methods for reflectance parameters Reflectance tolerance using an electrical spectrum analyser
07/30163795 DC : 0 BS EN 61290-11-1 - OPTICAL AMPLIFIERS. TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION - JONES MATRIX EIGENANALYSIS (JME)
BS EN 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services Bandwidth expansion for broadcast signal over FTTH system
10/30207290 DC : 0 BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
98/260896 DC : DRAFT MAR 1998 IEC 61291-3 ED. 1 - PERFORMANCE SPECIFICATION TEMPLATE ON OPTICAL AMPLIFIERS - PART 3: OPTICAL FIBRE AMPLIFIERS FOR ANALOGUE APPLICATIONS
09/30180383 DC : 0 BS EN 61162-450 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - LIGHTWEIGHT SHIP SYSTEMS INTERCONNECTION
PD IEC TR 60825-14:2004 Safety of laser products A user\'s guide
BS EN 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments Michelson interferometer single wavelength meters
03/318327 DC : DRAFT NOV 2003
06/30153342 DC : DRAFT JULY 2006 BS IEC 61746 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1 - OTDR FOR SINGLE-MODE FIBRES
08/30191345 DC : 0 BS EN 60728-11 ED.3 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
PD IEC/TR 60825-17:2015 Safety of laser products Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
BS EN 61746:2005 Calibration of optical time-domain reflectometers (OTDR)
CEI EN 61746-1 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES
98/261559 DC : DRAFT MAY 1998 IEC 61290-3 EDITION 1 - BASIC SPECIFICATION FOR OPTICAL FIBRE AMPLIFIER TEST METHODS - PART 3-1: TEST METHODS FOR NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER TEST METHOD
I.S. EN 60079-28:2015 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
09/30181956 DC : DRAFT MAY 2009 BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
CEI EN 61290-1-2 : 2006 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
SAE ARP 5602/14 : 2013 A RE-CERTIFICATION GUIDELINE FOR AEROSPACE PLATFORM FIBER OPTIC TRAINING AND AWARENESS EDUCATION AEROSPACE FIBER OPTICS FABRICATOR HANDS-ON COMPETENCIES
CEI EN 62129-2 : 2012 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
BS EN 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
CEI EN 60793-1-49 : 2007 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
ANSI INCITS 479 : 2011 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 5 (FC-PI-5)
I.S. EN 50411-3-5:2015 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-5: WALL OUTLET
I.S. EN 186260:1998 CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE SC (SECTIONAL SPECIFICATION)
UNI EN ISO 80601-2-61 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
CEI EN 61290-3-2 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-2: NOISE FIGURE PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
BS ISO/IEC 14763-3 : 2006 INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING
I.S. EN 60728-6:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
I.S. EN 61290-1-3:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD
I.S. EN 62496-4:2011 OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
CEI EN 50174-3 : 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
CEI EN 60728-6 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
I.S. EN 61746-1:2011 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES
CSA C22.2 No. 80601-2-61 : 2014(R2019) MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
NF EN 60950-1 : 2006 AMD 2 2014 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 60728-11:2016 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
IEC PAS 60793-1-49:2002 Optical fibres - Part 1-49 : Measurement methods and test procedures - Differential mode delay
BS EN ISO 80601-2-61:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment
ISO/IEC 14165-115:2006 Information technology Fibre Channel Part 115: Physical Interfaces (FC-PI)
IEC TR 60825-17:2015 Safety of laser products - Part 17: Safety aspects for use of passive optical components and optical cables in high power optical fibre communication systems
IEC 61280-4-1:2009 Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement
BS EN 60825-1:2014 Safety of laser products Equipment classification and requirements
I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
BIS IS 13252-1 : 2010 AMD 1 2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BIS IS 13252 : 2003 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - GENERAL REQUIREMENTS
I.S. EN 61290-7-1:2007 OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD
EN 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
NF EN 62496-1 : 2009 OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
BS EN 60793-1-49:2006 Optical fibres Measurement methods and test procedures - Differential mode delay
17/30347375 DC : 0 BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
03/309914 DC : DRAFT JUNE 2003 IEC PAS 62129 ED.1.0 - CALIBRATION OF OPTICAL SPECTRUM ANALYZERS
12/30258456 DC : 0 BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 61290-10-3:2003 Optical amplifiers. Test methods Multichannel parameters. Probe methods
BS EN 60825-12:2004 Safety of laser products Safety of free space optical communication systems used for transmission of information
BS EN 61290-10-1:2009 Optical amplifiers. Test methods Multichannel parameters. Pulse method using an optical switch and optical spectrum analyzer
I.S. EN ISO 9919:2009 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
TS 102 873 : 1.1.1 ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); OPTICAL EXTERNAL NETWORK TESTING INTERFACE
CEI EN 61300-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
12/30260552 DC : 0 BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
PD IEC/TR 62627-08:2016 Fibre optic interconnecting devices and passive components Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
BS EN 62496-1:2009 Optical circuit boards General
CEI EN 61280-4-1 : 2011 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
I.S. EN 61290-11-2:2005 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-2: POLARIZATION MODE DISPERSION PARAMETER - POINCARE SPHERE ANALYSIS METHOD
03/309966 DC : DRAFT JULY 2003 IEC 61290-11-2 - OPTICAL AMPLIFIER TEST METHODS - PART 11-2: POLARISATION MODE DISPERSION - POINCARE SPHERE ANALYSIS METHOD
06/30153345 DC : DRAFT JULY 2006 BS IEC 61746-2 - CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2 - OTDR FOR MULTIMODE FIBRES
PD IEC/TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity ofsinglemode fibre to bends. Guidance for the interpretation of results
DD IEC/PAS 61290-3-1:2002 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer
02/204735 DC : DRAFT AUG 2002 IEC 60793-1-49 ED.1 - OPTICAL FIBRE - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
18/30342107 DC : DRAFT APR 2018 BS EN 61315 - CALIBRATION OF FIBRE-OPTIC POWER METERS
12/30266214 DC : 0 ISO/IEC CD 14763-3 - IMPLEMENTATION AND OPERATION OF CPC - PART 3: TESTING OF OPTICAL FIBRE CABLING (2ND EDITION)
BS EN 61290-1-2:2005 Optical amplifiers. Test methods Power and gain parameters - Electrical spectrum analyzer method
CEI EN 60728-13 : 2010 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
BS EN 61290-6-1:1998 Optical fibre amplifiers. Basic specification Test methods for pump leakage parameters. Optical demultiplexer
CEI EN 60825-12 : 2005 SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
CEI EN 61280-4-2 : 2015 FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
16/30346304 DC : 0 BS EN 61162-450 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS -DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION
IEC TR 62547:2013 Guidelines for the measurement of high-power damage sensitivity of single-mode fibre to bends - Guidance for interpretation of results
09/30206090 DC : 0 BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE
04/30110918 DC : DRAFT MAR 2004 IEC 61290-1-2 ED 2.0 - OPTICAL AMPLIFIER TEST METHODS - PART 1-2: OPTICAL POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
DD IEC PAS 60793-1-49 : DRAFT SEPT 2002 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
ANSI INCITS 533 : 2016 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 6P (FC-PI-6P)
NF EN 60825-12 : 2005 SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
BS EN 61290-11-1:2008 Optical amplifiers. Test methods Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME)
CSA Z9919 :2007 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
DIN V VDE V 0837-7 : 1999 SAFETY OF LASER PRODUCTS - PART 7: SAFETY OF PRODUCTS EMITTING "INVISIBLE" OPTICAL RADIATION, EXCLUSIVELY USED FOR WIRELESS "FREE AIR" DATA TRANSMISSION AND SURVEILLANCE
CSA C22.2 No. 60079-28 : 2016 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
SAE AIR 6552/3 : 2016 NETWORK END-TO-END DATA LINK EVALUATION SYSTEM TRANSCEIVER HEALTH MONITORING
CEI EN 61315 : 2007 CALIBRATION OF FIBRE-OPTIC POWER METERS
I.S. EN 61758-1:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE
I.S. EN 60825-12:2004 SAFETY OF LASER PRODUCTS - PART 12: SAFETY OF FREE SPACE OPTICAL COMMUNICATION SYSTEMS USED FOR TRANSMISSION OF INFORMATION
EN 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
I.S. EN 61290-3-1:2003 OPTICAL AMPLIFIERS - TEST METHODS - PART 3-1: NOISE FIGURE PARAMETERS - OPTICAL SPECTRUM ANALYZER METHOD
I.S. EN 50174-3:2013 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
ISO/IEC 14575:2000 Information technology — Microprocessor systems — Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
PD IEC/TR 61292-4:2014 Optical amplifiers Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers
I.S. EN 60950-1:2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
I.S. EN 62300:2005 CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE WITH PLASTIC OPTICAL FIBRE
PREN 50174-3 : DRAFT 2012 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
I.S. EN 61300-1:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
CEI EN 61758-1 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - INTERFACE STANDARD FOR CLOSURES - PART 1: GENERAL AND GUIDANCE
CSA ISO/IEC 14763-3 : 2015 INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING
EN ISO 80601-2-61:2011 Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011)
NF EN ISO 80601-2-61 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
UNE-EN 60728-11:2012 Cable networks for television signals, sound signals and interactive services - Part 11: Safety
IEC 62368-1:2014 Audio/video, information and communication technology equipment - Part 1: Safety requirements
IEC 62522:2014 Calibration of tuneable laser sources
IEC PAS 61290-3-1:2002 Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer
IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
CLC/TR 50510:2012 Fibre optic access to end-user - A guideline to building of FTTX fibre optic network
BS EN ISO 9919:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
IEC 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
UNE-EN 60825-1:2015 Safety of laser products - Part 1: Equipment classification and requirements
I.S. EN 60825-1:2014 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60950-1:2007 Information technology equipment - Safety - Part 1: General requirements
CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN ISO 9919:2009 Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005)
UNI EN ISO 9919 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
EN 61290-11-1:2008 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
08/30177575 DC : DRAFT FEB 2008 BS EN 61300-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
IEC 60728-13-1:2017 Cable networks for television signals, sound signals and interactive services - Part 13-1: Bandwidth expansion for broadcast signal over FTTH system
10/30240050 DC : DRAFT DEC 2010 BS EN 61280-4-2 - FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLEMODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT
99/201577 DC : DRAFT MAR 1999 IEC 60728-6. ED.1 - CABLED DISTRIBUTION SYSTEMS FOR TELEVISION AND SOUND SIGNALS - PART 6: OPTICAL EQUIPMENT
BS EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology
I.S. EN 60728-13-1:2017 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13-1: BANDWIDTH EXPANSION FOR BROADCAST SIGNAL OVER FTTH SYSTEM
CEI EN 61290-6-1 : 1999 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - TEST METHODS FOR PUMP LEAKAGE PARAMETERS - OPTICAL DEMULTIPLEXER
17/30331301 DC : 0 BS ISO/IEC 14763-3 AMENDMENT 1 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING
12/30239867 DC : 0 BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS EN IEC 61291-1:2018 Optical amplifiers Generic specification
IEC TS 60825-6:1999 Safety of laser products - Part 6: Safety of products with optical sources, exclusively used for visible information transmission to the human eye
CEI EN 61746-2 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
07/30166811 DC : 0 BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES
IEC PAS 62129:2004 Calibration of optical spectrum analyzers
03/313421 DC : DRAFT NOV 2003 IEC 60079-28 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 28: RISK OF IGNITION BY RADIATION OF EXPLOSIVE ATMOSPHERES OF GAS, VAPOUR OR MIST FROM OPTICAL RADIATION EQUIPMENT AND TRANSMISSION SYSTEMS
15/30326655 DC : 0 BS EN 61280-4-1 - FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
CEI EN 61291-1 : 2013 OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION
BS EN 61746-2:2011 Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres
BS EN 61290-1:2015 Optical amplifiers. Test methods Power and gain parameters
BS EN 62522:2014 Calibration of tuneable laser sources
I.S. EN 62148-17:2014 FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS
11/30249050 DC : 0 BS EN 61291-1 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION
03/309903 DC : DRAFT JUNE 2003 IEC 61315 ED.2.0 - CALIBRATION OF FIBRE-OPTIC POWER METERS
BS EN 62496-4:2011 Optical circuit boards Interface standards. General and guidance
02/203624 DC : DRAFT FEB 2002 IEC 62300. ED.1.0 - CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE WITH PLASTIC OPTICAL FIBRE
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
12/30258453 DC : 0 BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
CEI EN 61290-2-2 : 1999 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PART 2-2: TEST METHODS FOR OPTICAL POWER PARAMETERS - ELECTRICAL SPECTRUM ANALYZER
04/30110909 DC : DRAFT MAR 2004 IEC 61291-1 ED 2.0 - OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION
BS EN 62300:2005 Consumer audio/video equipment digital interface with plastic optical fibre
BS EN 61290-3-1:2003 Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters Optical spectrum analyzer method
I.S. EN 60728-11:2017 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
BS EN 62129:2006 Calibration of optical spectrum analyzers
CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
CSA ISO/IEC 14165-115 : 2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 115: PHYSICAL INTERFACES (FC-PI)
IEC TR 62627-08:2016 Fibre optic interconnecting devices and passive components - Part 08: Study of optical power blocking measurement methods for adaptors with an optical power blocking shutter
EN IEC 61291-1:2018 Optical amplifiers - Part 1: Generic specification
ISA TR12.21.01 : 2004 USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS
ANSI INCITS 450 : 2009 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-4 (FC-PI-4)
EN 50174-3:2013/A1:2017 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
BS EN 61162-450:2011 Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ethernet interconnection
I.S. EN 62368-1:2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 62129-2:2011 CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS
CEI EN 61290-7-1 : 2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 7-1: OUT-OF-BAND INSERTION LOSSES - FILTERED OPTICAL POWER METER METHOD
ARINC 807-3 : 2013 FIBER OPTIC TRAINING REQUIREMENTS
SAE AIR 6112 : 2014 A GUIDELINE FOR AEROSPACE PLATFORM FIBER OPTIC EXPANDED BEAM INTERCONNECT TECHNOLOGY
BIS IS/IEC 60079-28 : 2006 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
EN 62368-1:2014/AC:2017-03 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
IEEE 802.3-2012 IEEE Standard for Ethernet
CEI EN 186260 : 1998 SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - TYPE SC
IEC TS 62129-3:2014 Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs
IEC TR 61292-4:2014 Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers
I.S. EN 61290-10-1:2009 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
IEC TR 62324:2007 Single-mode optical fibres - Raman gain efficiency measurement using continuous wave method - Guidance
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
I.S. EN 61746-2:2011 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
EN 61746-1:2011/AC:2014 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES (IEC 61746-1:2009)
EN 61746-2:2011/AC:2014 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
IEC 60728-13:2010 Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting — Part 1: General principles, acceptance conditions
BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
IEC 62129:2006 Calibration of optical spectrum analyzers
IEC 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
IEC 61290-11-1:2008 Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
17/30361391 DC : 0 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
IEC 61746-1:2009 Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single mode fibres
IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
IEC 62148-17:2013 Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
IEC 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
IEC 62300:2004 Consumer audio/video equipment digital interface with plastic optical fibre
IEC 61746:2005 Calibration of optical time-domain reflectometers (OTDR)
IEC 61290-1-3:2015 Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 62496-1:2008 Optical circuit boards - Part 1: General
IEC 61315:2005 Calibration of fibre-optic power meters
BS EN 60950-1 : 2006 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 61280-4-2:2014 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
IEC 61300-1:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
IEC 62150-1:2005 Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance
IEC 62129-2:2011 Calibration of wavelength/optical frequency measurement instruments - Part 2: Michelson interferometer single wavelength meters
IEC 61290-11-2:2005 Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
IEC 61758-1:2008 Fibre optic interconnecting devices and passive components - Interface standard for closures - Part 1: General and guidance
IEC 61300-3-35:2015 RLV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
IEC 60793-1-49:2006 Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
IEC 61290-7-1:2007 Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
BS EN ISO 15616-1:2003 Acceptance tests for CO<sub>2</sub>- laser beam machines for high quality welding and cutting General principles, acceptance conditions
EN 61162-450:2011/A1:2016 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION
EN ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 1: General principles, acceptance conditions (ISO 15616-1:2003)
ISO 80601-2-61:2017 Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
PD IEC PAS 62129:2004 Calibration of optical spectrum analyzers
BS EN 61315:2006 Calibration of fibre-optic power meters
BS EN 61746-1:2011 Calibration of optical time-domain reflectometers (OTDR) OTDR for single-mode fibres
CEI EN 62368-1 : 2016 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS EN 61290-11-2:2005 Optical amplifiers. Test methods Polarization mode dispersion parameter - Poincaré sphere analysis method
UNE-EN 60079-28:2016 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
BS EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services Optical equipment
I.S. EN 60728-13:2010 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 13: OPTICAL SYSTEMS FOR BROADCAST SIGNAL TRANSMISSIONS
BS EN 61290-1-3:2015 Optical amplifiers. Test methods Power and gain parameters. Optical power meter method
BS EN 60728-13:2010 Cable networks for television signals, sound signals and interactive services Optical systems for broadcast signal transmissions
CEI 76-11 : 2011 SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE
BS EN 50411-3-5:2015 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Wall outlet
14/30296100 DC : 0 BS EN 61290-1-3 - OPTICAL AMPLIFIERS - TEST METHODS - PART 1-3: OPTICAL POWER AND GAIN PARAMETERS - OPTICAL POWER METER METHOD
IEC TR 61292-6:2010 Optical amplifiers - Part 6: Distributed Raman amplification
CEI EN 61290-10-1 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-1: MULTICHANNEL PARAMETERS - PULSE METHOD USING AN OPTICAL SWITCH AND OPTICAL SPECTRUM ANALYZER
BS EN 186300:1999 Harmonized system of quality assessment for electronic components. Sectional specification: connector sets for optical fibres and cables type MSC
I.S. EN ISO 80601-2-61:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
I.S. EN 61290-1-2:2006 OPTICAL AMPLIFIERS - TEST METHODS - PART 1-2: POWER AND GAIN PARAMETERS - ELECTRICAL SPECTRUM ANALYZER METHOD
BS IEC 60825-6 : 1999 SAFETY OF LASER PRODUCTS - PART 6: SAFETY OF LASER PRODUCTS WITH OPTICAL SOURCES, EXCLUSIVELY USED FOR VISIBLE INFORMATION TRANSMISSION TO THE HUMAN EYE
16/30316718 DC : 0 BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
CEI EN 61290-11-1 : 2010 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME)
BS EN 61290-7-1:2007 Optical amplifiers. Test methods Out-of-band insertion losses. Filtered optical power meter method
BS EN 60079-28:2015 Explosive atmospheres Protection of equipment and transmission systems using optical radiation
03/111613 DC : DRAFT AUG 2003 BS EN ISO 9919 - MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
IEC TR 61282-1:2000 Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems
CAN/CSA-ISO/IEC 14165-115:2006(R2016) INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 115: PHYSICAL INTERFACES (FC-PI)
I.S. EN 61291-1:2012 OPTICAL AMPLIFIERS - PART 1: GENERIC SPECIFICATION (IEC 61291-1:2012 (EQV))
CEI EN 62496-4 : 2012 OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE
SAE AIR 6031 : 2012 FIBER OPTIC CLEANING
ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
CEI EN 60728-11 : 2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
I.S. EN 61280-4-1:2009 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
ANSI INCITS 512 : 2015 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-6 (FC-PI-6)
I.S. EN 62150-1:2005 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
I.S. EN 50700:2014 INFORMATION TECHNOLOGY - PREMISES DISTRIBUTION ACCESS NETWORK (PDAN) CABLING TO SUPPORT DEPLOYMENT OF OPTICAL BROADBAND NETWORKS
I.S. EN 61300-3-35:2015 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-35: EXAMINATIONS AND MEASUREMENTS - VISUAL INSPECTION OF FIBRE OPTIC CONNECTORS AND FIBRE-STUB TRANSCEIVERS
I.S. EN 50411-3-8:2016 FIBRE ORGANIZERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-8: FIBRE MANAGEMENT SYSTEM, TERMINAL EQUIPMENT BOX TYPE 1 FOR CATEGORY C
I.S. EN 61290-11-1:2008 OPTICAL AMPLIFIERS - TEST METHODS - PART 11-1: POLARIZATION MODE DISPERSION PARAMETER - JONES MATRIX EIGENANALYSIS (JME)
I.S. EN 61290-1:2015 OPTICAL AMPLIFIERS - TEST METHODS - PART 1: POWER AND GAINPARAMETERS
I.S. EN 61162-450:2011 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION (IEC 61162-450:2011/A1:2016)
UNE-EN 61300-1:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
CEI EN 60079-28 : 2016 EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
CEI EN 61290-2-3 : 1999 OPTICAL FIBRE AMPLIFIERS - BASIC SPECIFICATION - PARTS 2-3: TEST METHODS FOR OPTICAL POWER PARAMETERS - OPTICAL POWER METER
I.S. EN 60793-1-49:2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
ISO/IEC/IEEE 8802-3:2017 Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet
S.R. CLC/TR 50510:2012 FIBRE OPTIC ACCESS TO END-USER - A GUIDELINE TO BUILDING OF FTTX FIBRE OPTIC NETWORK
IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
I.S. EN 61315:2006 CALIBRATION OF FIBRE-OPTIC POWER METERS
I.S. EN 62496-1:2009 OPTICAL CIRCUIT BOARDS - PART 1: GENERAL
I.S. EN 61290-10-3:2003 OPTICAL AMPLIFIERS - TEST METHODS - PART 10-3: MULTICHANNEL PARAMETERS - PROBE METHODS
I.S. EN 61746:2005 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR)
EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
IEC 61290-1:2014 Optical amplifiers - Test methods - Part 1: Power and gain parameters
11/30258071 DC : 0 BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
ISO 9919:2005 Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
IEC 61746-2:2010 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
IEC 61290-10-3:2002 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
IEC 61290-5-3:2002 Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer
EN 61290-10-3:2003 Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
EN 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
EN 61300-3-35:2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers
EN 61300-1:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
EN 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
EN 61746:2005 Calibration of optical time-domain reflectometers (OTDR)
EN 61290-3-2:2008 Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
EN 61291-1:2012 Optical amplifiers - Part 1: Generic specification
NF EN 61280-4-1 : 2010 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
EN 62150-1:2005 Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance
EN 61290-11-2:2005 Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
EN 62496-4:2011 Optical circuit boards - Part 4: Interface standards - General and guidance
EN 62522:2014 Calibration of tuneable laser sources
EN 61315:2006 Calibration of fibre-optic power meters
EN 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
CEI EN 62148-17 : 2014 FIBER OPTIC ACTIVE COMPONENTS AND DEVICES - PACKAGE AND INTERFACE STANDARDS - PART 17: TRANSMITTER AND RECEIVER COMPONENTS WITH DUAL COAXIAL RF CONNECTORS

IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
IEC 60794-3:2014 Optical fibre cables - Part 3: Outdoor cables - Sectional specification
IEC 60812:2006 Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)
HRD 5 : 94 + ERRATA HANDBOOK OF RELIABILITY DATA FOR COMPONENTS USED IN TELECOMMUNICATIONS SYSTEMS
IEC 60794-1-2:2017 Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
IEC 60794-3-10:2015 Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables
IEC 60825-12:2004 Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 60794-1-1:2015 Optical fibre cables - Part 1-1: Generic specification - General
IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
MIL-HDBK-217 Revision F:1991 RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT
IEC 60794-2:2017 Optical fibre cables - Part 2: Indoor cables - Sectional specification
IEC 60794-3-20:2016 Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables
IEC 60794-4-1:1999 Optical fibre cables - Part 4-1: Aerial optical cables for high-voltage power lines

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.