• Shopping Cart
    There are no items in your cart

IEC 60728-12:2017

Current

Current

The latest, up-to-date edition.

Cable networks for television signals, sound signals and interactive services - Part 12: Electromagnetic compatibility of systems

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

06-19-2017

US$174.00
Excluding Tax where applicable

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviated terms
4 Methods of measurement
5 Performance requirements
Annex A (informative) - Information on legal requirements
        in some countries
Annex B (informative) - Frequency ranges of typical safety
        of life services
Annex C (informative) - Interdependence between the
        maximum allowable field strength and the minimum
        signal level at system outlet
Annex D (normative) - Measurements at other distances
        than the standard distance of 3 m
Annex E (informative) - GPS based leakage detection system
        for cable networks
Bibliography

IEC 60728-12:2017(E) applies to the radiation characteristics and immunity to electromagnetic disturbance of cable networks for television signals, sound signals and interactive services and covers the frequency range 0,15 MHz to 3,5 GHz. This second edition cancels and replaces the first edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) IEC 60728-12 with its methods of measurement and EMC performance requirements is explicitly dedicated to “under operating conditions (in situ)” to ensure the ongoing EMC integrity of cable networks.
b) The first intermediate frequency range (1st IF range) for satellite signal transmission was extended to cover now frequencies from 950 MHz up to 3 500 MHz.
c) The method of measurement and the requirements for in-band immunity were extended taking into account the new EMC environment due to the allocation of broadband wireless services in the frequency band 694 MHz to 862 MHz. As a consequence, the limits of in-band immunity were specified for analogue and additionally for digital signals in this frequency range.
d) The substitution method of measurement (power method) was deleted.
e) EMC measurements below 30 MHz were deleted.
f) New Annex D “Measurements at other distances than the standard distance of 3 m”.
g) New Annex E “GPS based leakage detection system for cable networks”.

Committee
TC 100
DevelopmentNote
Stability Date: 2020. (06/2017)
DocumentType
Standard
Pages
25
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

Standards Relationship
BS IEC 60728-12:2017 Identical

I.S. EN 60728-101:2017 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY
03/311342 DC : DRAFT JULY 2003 IEC 60728-10 ED.2.0 - CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE OF RETURN PATH (TA5)
EN 60728-1-1:2014 Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks
EN 60728-1:2014 Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths
EN 60728-10:2014 Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths
15/30298002 DC : 0 BS EN 60728-101 ED 1.0 - CABLE NETWORKS FOR TELEVISION SIGNALS; SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS WITH ALL-DIGITAL CHANNELS LOAD (TA/5)
BS EN 60728-1:2014 Cable networks for television signals, sound signals and interactive services System performance of forward paths
CEI EN 61935-3 : 2011 TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS
IEC 60728-101:2016 Cable networks for television signals, sound signals and interactive services - Part 101: System performance of forward paths loaded with digital channels only
IEC 60728-1:2014 Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths
BS EN 60728-1-1:2014 Cable networks for television signals, sound signals and interactive services RF cabling for two way home networks
IEC 61935-3:2008 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards
I.S. EN 60728-1-1:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1-1: RF CABLING FOR TWO WAY HOME NETWORKS
BS EN 60728-10:2014 Cable networks for television signals, sound signals and interactive services System performance for return paths
CEI EN 60728-101 : 1ED 2017 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY
IEC 60728-2:2018 Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
IEC 60728-10:2014 Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return paths
IEC 60728-1-1:2014 Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks
NF EN 61935-3 : 2010 TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS
BS EN 60728-101:2017 Cable networks for television signals, sound signals and interactive services System performance of forward paths loaded with digital channels only
BS EN 61935-3:2009 Testing of balanced and coaxial information technology cabling Installed cabling as specified in EN 50173-4 and related standards
EN 60728-101:2017/AC:2017-07 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 101: SYSTEM PERFORMANCE OF FORWARD PATHS LOADED WITH DIGITAL CHANNELS ONLY (IEC 60728-101:2016)
I.S. EN 60728-10:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 10: SYSTEM PERFORMANCE FOR RETURN PATHS
I.S. EN 61935-3:2009 TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS
I.S. EN 60728-1:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS
EN 61935-3:2009 Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in EN 50173-4 and related standards
CEI EN IEC 60728-101-1:2023 Cable networks for television signals, sound signals and interactive services Part 101-1: RF cabling for two-way home networks with all-digital channels load

CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
IEC 60966-2-6:2016 Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
CISPR 16-1-1:2015 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
CISPR 32:2015 RLV Electromagnetic compatibility of multimedia equipment - Emission requirements
IEC 61169-24:2009 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)
IEC 60966-2-5:2016 Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
IEC 60966-2-7:2015 Radio frequency and coaxial cable asemblies - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors
IEC 60966-2-4:2016 Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
IEC 61169-2:2007 Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.