IEC 60317-1:2010
Current
The latest, up-to-date edition.
Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
03-10-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and general notes on methods
of test and appearance
4 Dimensions
5 Electrical resistance
6 Elongation
7 Springiness
8 Flexibility and adherence
9 Heat shock
10 Cut-through
11 Resistance to abrasion (nominal conductor diameters
from 0,250 mm up to and including 2,500 mm)
12 Resistance to solvents
13 Breakdown voltage
14 Continuity of insulation
15 Temperature index
16 Resistance to refrigerants
17 Solderability
18 Heat and solvent bonding
19 Dielectric dissipation factor
20 Resistance to transformer oil
21 Loss of mass
23 Pin hole test
30 Packaging
IEC 60317-1:2010 specifies the general requirements of enamelled round copper winding wires of class 105 with a sole coating based on polyvinyl acetal resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The main changes with respect to the previous edition are:
- new requirements for appearance;
- deletion of high temperature failure requirements;
- new pin hole test requirement.
| Committee |
TC 55
|
| DevelopmentNote |
To be read in conjunction with IEC 60317-0-1. (03/2010) Stability Date: 2018. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
25
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN IEC 60317-1 : 2010 | Identical |
| EN 60317-1 : 1994 AMD 2 1998 | Identical |
| DIN EN 60317-1 : 95 AMD 1 97 | Identical |
| DIN 46416-1 : 1977 | Similar to |
| UNE 21179-1:1994 | Identical |
| BS 4516-1:1969 | Similar to |
| NFC 31 601 : 1982 | Similar to |
| DIN IEC 60317-1:2009-06 (Draft) | Similar to |
| NEN EN IEC 60317-1 : 1995 AMD 2 1998 | Identical |
| NEN 10317-1 : 1995 AMD 1 1997 | Similar to |
| CEI EN 60317-1 : 5ED 2000 | Identical |
| I.S. EN 60317-1:1996 | Identical |
| UNE EN 60317-1 : 1995 A2 1998 | Identical |
| CSA E926 : 1998 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 60926 : 2000 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| BS EN 119000:1997 | Harmonized system of quality assessment for electronic components. Generic specification: dry and mercury wetted reed contact units |
| BS EN 62246-2:2008 | Reed contact units Heavy-duty reed switches |
| I.S. EN 62246-2:2008 | REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES |
| IEC 62246-1:2015 | Reed switches - Part 1: Generic specification |
| EN 62246-1:2015 | Reed switches - Part 1: Generic specification |
| EN 60926:1996/A1:1999 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| EN 62246-2:2008 | Reed contact units - Part 2: Heavy-duty reed switches |
| BS EN 60926:1996 | Specification for auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements |
| 13/30278343 DC : 0 | BS EN 62246-1 - REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| 12/30273916 DC : 0 | BS EN 61858-1 - ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED EIS - PART-1: WIRE-WOUND WINDING EIS |
| BS EN 61858-1:2014 | Electrical insulation systems. Thermal evaluation of modifications to an established electrical insulation system (EIS) Wire-wound winding EIS |
| BS 6811-3.0(1993) : 1993 AMD 8984 | WINDING WIRES - SPECIFICATIONS FOR PARTICULAR TYPES OF ROUND COPPER WINDING WIRES - GENERAL REQUIREMENTS |
| CAN/CSA-E926-98 (R2017) | Auxiliaries for Lamps - Starting Devices (Other Than Glow Starters) - General and Safety Requirements (Adopted CEI/IEC 926:1995, second edition, 1995-01, with Canadian deviations) | Appareils auxiliaires pour lampes - Dispositifs d\'amorçage (autres que starters à lueur) - Prescriptions générales et prescriptions de sécurité(norme CEI/IEC 926:1995 adoptée, deuxième édition, 1995-01, avec exigences propres au Canada) |
| ASTM F 792 : 2017 : EDT 1 | Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems |
| IEC 60034-18-22:2000 | Rotating electrical machines - Part 18-22: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Classification of changes and insulation component substitutions |
| 08/30193715 DC : 0 | BS EN 62246-1 ED.2 - REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| CSA E926 : 1998 : INC : UPD 1 : 1998 : R2012 | AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - GENERAL AND SAFETY REQUIREMENTS |
| ASTM F 792 : 2017 | Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems |
| I.S. EN 61858-1:2014 | ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED ELECTRICAL INSULATION SYSTEM (EIS) - PART 1: WIRE-WOUND WINDING EIS |
| I.S. EN 62246-1:2015 | REED SWITCHES - PART 1: GENERIC SPECIFICATION |
| IEC 62246-2:2007 | Reed contact units - Part 2: Heavy-duty reed switches |
| IEC 61858-1:2014 | Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS |
| BS EN 62246-1:2015 | Reed switches Generic specification |
| BS IEC 62246-2 : 2007 | REED CONTACT UNITS - PART 2: HEAVY-DUTY REED SWITCHES |
| EN 61046:1994/A1:1996 | D.C. OR A.C. SUPPLIED ELECTRONIC STEP-DOWN CONVERTERS FOR FILAMENT LAMPS - GENERAL AND SAFETY REQUIREMENTS |
| EN 61858-1:2014 | Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 1: Wire-wound winding EIS |
| EN 119000 : 1996 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: GENERIC SPECIFICATION: DRY AND MERCURY WETTED REED CONTACT UNITS |
| IEC 60317-0-1:2013 | Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.