IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Low-voltage fuses - Part 1: General requirements
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
08-09-2024
Superseded by
Language(s)
English - French
Published date
06-30-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 General
2 Terms and definitions
3 Conditions for operation in service
4 Classification
5 Characteristics of fuses
6 Markings
7 Standard conditions for construction
8 Tests
Annex A (informative) - Measurement of short-circuit
power factor
Annex B (informative) - Calculation of pre-arcing I[2]t
values for 'gG', 'gM', 'gD' and 'gN' fuse-links
and calculation of operating I[2]t values at
reduced voltage
Annex C (informative) - Calculation of cut-off current-time
characteristic
Annex D (informative) - Effect of change of ambient
temperature and surroundings on the
performance of fuse-links
Annex E (normative) - Particular requirements for
fuse-bases with screwless-type terminals for
external copper conductors
Bibliography
IEC 60269-1:2006+A1:2009+A2:2014 is applicable to fuses incorporating enclosed current-limiting fuse-links with rated breaking capacities of not less than 6 kA, intended for protecting power-frequency a.c. circuits of nominal voltages not exceeding 1 000 V or d.c. circuits of nominal voltages not exceeding 1 500 V. Subsequent parts of this standard, referred to herein, cover supplementary requirements for such fuses intended for specific conditions of use or applications. This consolidated version consists of the fourth edition (2006), its amendment 1 (2009) and its amendment 2 (2014). Therefore, no need to order amendments in addition to this publication.
| Committee |
TC 32/SC 32B
|
| DevelopmentNote |
Supersedes IEC 60066 and IEC 60088. (09/2001) Stability Date: 2021. (07/2014)
|
| DocumentType |
Standard
|
| Pages |
345
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| GOST R IEC 60269-1 : 2010 | Identical |
| NBN EN 60269-1 : 2007 AMD 2 2014 | Identical |
| NEN EN IEC 60269-1 : 2007 AMD 2 2014 | Identical |
| PN EN 60269-1 : 2010 AMD 2 2015 | Identical |
| VDE 0636-1 : 2015 | Identical |
| DIN EN 60269-1 : 2015 | Identical |
| BS EN 60269-1 : 2007 | Identical |
| EN 60269-1:2007/A2:2014 | Identical |
| VDE 0636-10 : 2005 | Identical |
| UNE 21103-1:1991 | Identical |
| BS 88-1(2007) : 2007 | Identical |
| NFC 60 200 : 1982 | Identical |
| NEN 10269-1 : 90 AMD 2 97 | Identical |
| NF EN 60269-1 : 2007 AMD 2 2014 | Identical |
| UNE-EN 60269-1:2008 | Identical |
| BS 1361:1971 | Similar to |
| DIN VDE 0636-10 : 1992 | Corresponds |
| SN EN 60269-1 : 1998 | Identical |
| VDE 0636-104 : DRAFT 1987 | Identical |
| BS 1362:1973 | Similar to |
| BS 88-1(1988) : 1988 AMD 8310 | Identical |
| CEI EN 60947-4-3 : 2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS |
| BIS IS/IEC 60947-4-3 : 1999 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 3: AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS |
| 09/30173454 DC : 0 | BS EN 61881-1 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: REQUIREMENTS, TESTS AND GENERAL INFORMATION |
| 15/30314469 DC : 0 | BS EN 62548 ED.1 - PHOTOVOLTAIC (PV) ARRAYS - DESIGN REQUIREMENTS |
| 05/30128036 DC : DRAFT JAN 2005 | IEC 60079-5 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 5: POWDER FILLING 'Q' |
| 16/30350588 DC : 0 | BS PD IEC/TS 62446-3 ED 1.0 - PHOTOVOLTAIC (PV) SYSTEMS - REQUIREMENTS FOR TESTING, DOCUMENTATION AND MAINTENANCE - PART 3: OUTDOOR INFRARED THERMOGRAPHY OF PHOTOVOLTAIC MODULES AND PLANTS |
| NF EN 60269-4 : 2010 AMD 2 2017 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| NF EN 60931-1 : 97 AMD 1 2003 | SHUNT POWER CAPACITORS OF THE NON-SELF HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| CSA E79.18 : 1995 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ENCAPSULATION "M" |
| 10/30198892 DC : 0 | BS EN ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| UNI ISO 11862 : 2008 | EARTH-MOVING MACHINERY - AUXILIARY STARTING AID ELECTRICAL CONNECTOR |
| 12/30273548 DC : 0 | BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| BS EN 61534-1 : 2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 61881-1 : 2012 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS |
| BS EN 61036:1997 | Alternating current static watt-hour meters for active energy (classes 1 and 2) |
| 03/118984 DC : 0 | ISO 15998 - EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS |
| 14/30318875 DC : 0 | BS EN 60269-4:2012+AMD 2 - LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| 08/30194268 DC : 0 | BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| 18/30368743 DC (published 2018-04) | BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS) |
| CEI EN 61534-1 : 2012 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS EN 60730-2-4:2007 | Automatic electrical controls for household and similar use Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
| CEI EN 60269-6 : 2012 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| UNE-EN 61534-1:2011 | Powertrack systems -- Part 1: General requirements |
| BS EN 61881:2000 | Railway applications. Rolling stock equipment. Capacitors for power electronics |
| EN IEC 62613-1:2018 | Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements |
| I.S. EN 60947-4-3:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS |
| IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| IEC TR 61912-2:2009 | Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions |
| I.S. EN 60309-1:1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 (EQV)) |
| ISO 14990-1:2016 | Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements |
| I.S. EN 61881-1:2011 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS |
| BS EN 60947-4-3:2014 | Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor controllers and contactors for non-motor loads |
| EN 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| UNE-EN 60974-6:2011 | Arc welding equipment - Part 6: Limited duty equipment |
| BS EN 60947-2:2017 | Low-voltage switchgear and controlgear Circuit-breakers |
| I.S. EN 60947-4-2:2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| IEC TR 60269-5:2014 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
| EN 1366-11:2018 | Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components |
| IEC 62613-1:2011 | Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) - Part 1: General requirements |
| EN 60077-5:2003 | Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| DIN EN ISO 13849-2:2013-02 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| UNI EN 81-22 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| UNE-EN ISO 13849-2:2013 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| 15/30286010 DC : 0 | BS ISO 14990-1 - EARTH-MOVING MACHINERY - ELECTRICAL SAFETY OF MACHINES UTILISING ELECTRIC DRIVES AND RELATED COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 13/30238229 DC : 0 | BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| CLC/TR 60269-5:2011 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
| EN 62052-31:2016 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| EN 61881-1:2011 | Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors |
| EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 60947-4-3:2014 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| EN 60947-4-2:2012 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| EN 60831-1:2014/AC:2014 | SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| EN 62606:2013/A1:2017 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (IEC 62606:2013/A1:2017) |
| HD 60364-4-43:2010 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| EN 60269-4:2009/A2:2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009/A2:2016) |
| DEFSTAN 08-107/3(2013) : 2013 | GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT |
| EN 300 132-1 : 2.0.1 DRAFT | ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO INFORMATION AND COMMUNICATION TECHNOLOGY (ICT) EQUIPMENT; PART 1: OPERATED BY ALTERNATING CURRENT (AC) SOURCE |
| CEI EN 60730-2-4 : 2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| 12/30261056 DC : DRAFT MAR 2012 | BS EN 60269-6:2011+A1 - LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| 10/30216162 DC : DRAFT DEC 2010 | BS EN 62196-1 - PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| BS EN 45510-2-7:2002 | Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear |
| I.S. EN 115-1:2017 | SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| 08/30190191 DC : DRAFT SEP 2008 | BS EN 60947-4-3 AMD2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-3: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND CONTACTORS FOR NON-MOTOR LOADS |
| 09/30195381 DC : 0 | BS EN 60269-6 - LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| PREN 61008-1 : DRAFT 2011 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| 11/30243422 DC : DRAFT FEB 2011 | BS EN 60831-1 - SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| 13/30277668 DC : 0 | BS EN 62196-1 ED 3.0 - PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| 11/30233197 DC : 0 | BS EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| NF EN 60309-1 : 1999 AMD 2 2013 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS HD 60269-2:2013 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K |
| 12/30248611 DC : 0 | BS EN 62606 - GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (AFDD) |
| BS EN 61642:1998 | Industrial a.c. networks affected by harmonics. Application of filters and shunt capacitors |
| IEC 62271-1:2017 | High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
| IEC 62335:2008 | Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications |
| CEI UNI EN 45510-2-7 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| 05/30134428 DC : DRAFT JUN 2005 | |
| I.S. EN IEC 62613-1:2018 | PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS |
| GOST R IEC 60269-3-1 : 2004 | LOW-VOLTAGE FUSES - PART 3-1 - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 5 |
| 04/30111859 DC : 0 | IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS |
| BS 5501-8:1988 | Electrical apparatus for potentially explosive atmospheres Encapsulation \'m\' |
| IEC 60974-6:2015 | Arc welding equipment - Part 6: Limited duty equipment |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| I.S. HD 60269-2:2013 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD)) |
| CEI UNI EN 45510-2-4 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-4: ELECTRICAL EQUIPMENT - HIGH POWER STATIC CONVERTORS |
| NF EN 61881-1 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 1: PAPER/PLASTIC FILM CAPACITORS |
| I.S. EN 62271-1:2017 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR |
| IEC 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| I.S. EN 61071:2007 | CAPACITORS FOR POWER ELECTRONICS |
| I.S. EN 60077-5:2003 | RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| I.S. HD 60269-2-1:2005 | LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES |
| BS EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements |
| I.S. EN 60931-1:1997 | SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AN INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS GUIDE FOR INSTALLATION AND OPERATION |
| CEI EN 60947-4-2 : 2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| CEI EN 62196-1 : 2015 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| I.S. EN 60204-32:2008 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| IEC 60884-2-1:2006 | Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs |
| IEC TR 61912-1:2007 | Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| UNE-EN 62196-1:2015 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| BS EN ISO 13849-2:2012 | Safety of machinery. Safety-related parts of control systems Validation |
| IEC 60947-4-3:2014 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| 06/30154990 DC : 0 | BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES |
| UL 60730-1:5ED 2016-08-03 | Automatic Electrical Controls - Part 1: General Requirements |
| I.S. EN ISO 13849-2:2012 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION (ISO 13849-2:2012) |
| IEC 60947-2:2016 RLV | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| BIS IS/IEC 61058-1 : 2000(R2007) | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS 88-3:2007 | Low-voltage fuses Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications). Examples of standardized systems of fuses A to F |
| BS 88-2(2013) : 2013 COR 2014 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K |
| BS 88-2:2007 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to I |
| BS 88-2(2010) : 2010 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J |
| 11/30253460 DC : 0 | BS HD 60269-3:2010+A1/BS 883-3:2010+A1 - LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD OR SIMILAR APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| DIN VDE 0660-100 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| BS 7400(1991) : 1991 AMD 7672 | SPECIFICATION FOR ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| 98/200210 DC : DRAFT JAN 1998 | |
| BS EN 60269-2:1995 | Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) |
| UNE-HD 60269-2:2014 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| BS EN 60974-6:2016 | Arc welding equipment Limited duty equipment |
| UNE-EN 61008-1:2013 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| 14/30299454 DC : 0 | BS EN 60974-6 - ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT |
| CEI 32-12 : 2014 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K |
| BS 88-2.1:1988 | Cartridge fuses for voltages up to and including 1000 V a.c. and 1500 V d.c. Specification for fuses for use by authorized persons (mainly for industrial application). Additional requirements for fuses with fuse-links for bolted connections |
| BS EN 60077-5:2003 | Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses |
| 16/30339801 DC : 0 | BS EN 63052 - POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICES FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP) |
| PD IEC/TR 61912-2:2009 | Low-voltage switchgear and controlgear. Over-current protective devices Selectivity under over-current conditions |
| 07/30165742 DC : 0 | BS EN 60947-4-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| BS EN 60127-7:2016 | Miniature fuses Miniature fuse-links for special applications |
| BS EN 61881-1:2011 | Railway applications. Rolling stock equipment. Capacitors for power electronics Paper/plastic film capacitors |
| 10/30232643 DC : 0 | BS EN 62613-1 - HIGH-VOLTAGE PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS |
| EN 115-1:2017 | Safety of escalators and moving walks - Part 1: Construction and installation |
| BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
| 03/312546 DC : DRAFT JULY 2003 | IEC 60884-2-1 ED.2 - PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-1: PARTICULAR REQUIREMENTS FOR POLARISED FUSED PLUGS |
| DIN EN 50091-1-1 : 1997 | |
| EN 61534-1:2011/A1:2014 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014) |
| PREN 50577 : DRAFT 2012 | ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60269-4:2009 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| BS EN 62271-1:2017 | High-voltage switchgear and controlgear Common specifications for alternating current switchgear and controlgear |
| EN 60947-2:2017 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| BS EN 60269-4 : 2009 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009) |
| I.S. EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| CEI EN 62606 : 2014 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES |
| PREN 50630 : DRAFT 2014 | BS EN 50630 - TIME-DELAYED RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS TYPE M WITHOUT OVER-CURRENT PROTECTION OR APPLICATION IN CIRCUITS WITH RATED CURRENTS GREATER ABOVE 32 A |
| I.S. EN 60947-2:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT-BREAKERS |
| I.S. EN 61036:1997 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| NF EN 61534-1 : 2011 AMD 1 2014 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| ISO/TR 14799-1:2015 | Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
| ISO 15998:2008 | Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety |
| I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| I.S. EN 60831-1:2014-2015-10 | SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| IEC 61992-1:2006+AMD1:2014 CSV | Railway applications - Fixed installations - DC switchgear - Part 1:General |
| IEC 60730-2-4:2006 | Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 62103:2003 | Electronic equipment for use in power installations |
| IEC 62986:2017 | Plugs, socket-outlets and couplers with arcuate contacts |
| IEC 61892-3:2012 | Mobile and fixed offshore units - Electrical installations - Part 3: Equipment |
| I.S. EN 60204-1:2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
| IEEE 2030.1.1-2015 | IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles |
| IEC 60439-5:2006 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
| UNE-EN 60947-4-1:2011 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| 18/30375223 DC | BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads |
| BS EN 81-22:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Electric lifts with inclined path |
| UNE-EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV | Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| UNE-EN 60204-1:2007 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| UNI EN ISO 13849-2 : 2013 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| BIS IS/IEC 60947-4-2 : 1999 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTRACTORS AND MOTOR-STARTERS - SECTION 2: AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| BS EN 60947-4-1 : 2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| BS EN 50300:2004 | Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards |
| 03/103717 DC : 0 | IEC 60730-2-4 - AUTOMATIC CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS - SECTION 4: THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OR HERMATIC AND SEMI-HERMATIC TYPE |
| 08/30190185 DC : DRAFT SEP 2008 | BS EN 60947-4-2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - AC SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| PREN ISO 13849-2 : DRAFT 2010 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: VALIDATION |
| UNI ISO 15998 : 2008 | EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| NF EN 60269-3 : 96 AMD 1 2004 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) |
| I.S. EN 81-22:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
| DIN EN 61268 : 1996 | ALTERNATING CURRENT STATIC VAR-HOUR METERS FOR REACTIVE ENERGY (CLASSES 2 AND 3) |
| 04/30125747 DC : DRAFT NOV 2004 | IEC 60439-5 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| BS EN 61071:2007 | Capacitors for power electronics |
| BS IEC 62613-1 : 2011 | PLUGS, SOCKET-OUTLETS AND SHIP COUPLERS FOR HIGH-VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) - PART 1: GENERAL REQUIREMENTS |
| BS EN 60439-5:2006 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| PD IEC/TR 61912:2006 | Application of the short-circuit ratings of low-voltage switchgear and controlgear |
| BS HD 60269-3 : 2010 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| NF ISO 11862 : 2005 | EARTH-MOVING MACHINERY - AUXILIARY STARTING AID ELECTRICAL CONNECTOR |
| 11/30241356 DC : 0 | BS HD 60269-2 - LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO M |
| 05/30133451 DC : 0 | EN 115 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND MOVING WALKS |
| 01/206938 DC : DRAFT OCT 2001 | IEC 60255-27 ED.1.0 - MEASURING RELAYS AND EQUIPMENT - PART 27: PRODUCT SAFETY REQUIREMENTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT |
| DIN VDE 0660-102 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| NF EN 61071 : 2007 | CAPACITORS FOR POWER ELECTRONICS |
| 01/712575 DC : DRAFT SEP 2001 | ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION |
| BS EN 61268:1996 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| BS EN 60931-1:1998 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV General. Performance, testing and rating. Safety requirements. Guide for installation and operation |
| NF HD 60269-3 : 2007 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD OR SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| CSA E60730-2-4 : 2013 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| UNI CEI EN 45510-2-7 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR |
| CSA E60079.5 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS |
| CSA C22.2 NO. 60947-4-1:14 (R2019) | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1) |
| UNE-EN 60947-4-3:2014 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| UNE-EN 60947-4-2:2013 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| ISO 11862:1993 | Earth-moving machinery — Auxiliary starting aid electrical connector |
| GOST R IEC 61048 : 2005 | AUXILIARIES FOR LAMPS - CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS - GENERAL AND SAFETY REQUIREMENTS |
| NFC 63 213 : 2005 | LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES |
| UNE-EN 60269-4:2011 | Low-voltage fuses -- Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
| I.S. EN 60269-6:2011 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| I.S. EN 60947-7-2:2009 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-2: ANCILLARY EQUIPMENT - PROTECTIVE CONDUCTOR TERMINAL BLOCKS FOR COPPER CONDUCTORS |
| I.S. EN 60974-6:2016 | ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT |
| HD 60269-2-1:2005 | Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses |
| CEI 32-13 : 2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| CEI UNI EN 45510-2-3 : 2000 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-3: ELECTRICAL EQUIPMENT - STATIONARY BATTERIES AND CHARGERS |
| ISO/TR 14799-2:2015 | Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments |
| IEC 61071:2017 | Capacitors for power electronics |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| IEC 60269-3:2010+AMD1:2013+AMD2:2019 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| I.S. EN 61534-1:2011 | POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| IEC 62955:2018 | Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles |
| S.R. CLC/TR 50480:2011 | DETERMINATION OF CROSS-SECTIONAL AREA OF CONDUCTORS AND SELECTION OF PROTECTIVE DEVICES |
| I.S. HD 60364-4-43:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-43: PROTECTION FOR SAFETY - PROTECTION AGAINST OVERCURRENT |
| EN 60269-6:2011 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| IEC 61881:1999 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| IEC 62052-31:2015 | Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| BS PD88-5(2010) : 2010 | LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES |
| IEC 61534-1:2011+AMD1:2014 CSV | Powertrack systems - Part 1: General requirements |
| 07/30169755 DC : 0 | BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING |
| BS EN 60947-2:2017+A1:2020 | Low-voltage switchgear and controlgear Circuit-breakers |
| IEC 60831-1:2014 RLV | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation |
| 14/30238347 DC : 0 | BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| 15/30324856 DC : 0 | BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| PD CLC/TR 50480:2011 | Determination of cross-sectional area of conductors and selection of protective devices |
| 08/30185258 DC : DRAFT JULY 2008 | BS EN 60269-5 - LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES |
| EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| IEC 60947-4-2:2011 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories |
| IEC 61058-2-4:1995+AMD1:2003 CSV | Switches for appliances - Part 2-4: Particular requirements for independently mounted switches |
| IEC 61881-1:2010 | Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors |
| IEC 60269-2-1:2004 | Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses |
| IEC 61268:1995 | Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| 11/30233799 DC : 0 | BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS |
| PD ISO/TR 14799-2:2005 | Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments |
| BS ISO 14990-1:2016 | Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements |
| BS IEC 62548:2016 | Photovoltaic (PV) arrays. Design requirements |
| UNE-HD 60364-4-43:2013 | Low-voltage electrical installations -- Part 4-43: Protection for safety - Protection against overcurrent |
| EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 45510-2-7:2002 | Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear |
| I.S. EN 60127-7:2016 | MINIATURE FUSES - PART 7: MINIATURE FUSE-LINKS FOR SPECIAL APPLICATIONS |
| BIS IS/IEC 60947-3 : 1999 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE COMBINATION UNITS |
| 12/30260450 DC : 0 | BS EN 50577 - ELECTRIC CABLES - FIRE RESISTANCE TEST FOR UNPROTECTED ELECTRIC CABLES (P CLASSIFICATION) |
| 01/205932 DC : DRAFT AUG 2001 | BS 8431 - CODE OF PRACTICE FOR ELECTRICAL STATIC METERING FOR SECONDARY OR SUB-METERING |
| CEI EN 60077-5 : 2004 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES |
| 06/30151625 DC : DRAFT JUN 2006 | BS IEC TR 61912-1 - APPLICATION OF THE SHORT-CIRCUIT RATINGS OF LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR |
| I.S. EN 62606:2013 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES |
| BS EN 60947-4-2:2012 | Low-voltage switchgear and controlgear Contactors and motor-starters. AC semiconductor motor controllers and starters |
| BS EN 60831-1:2014 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V General. Performance, testing and rating. Safety requirements. Guide for installation and operation |
| CEI EN 61071 : 2007 | CAPACITORS FOR POWER ELECTRONICS |
| DIN VDE 0660-101 : 1992 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 2: CIRCUIT BREAKERS |
| 13/30294866 DC : 0 | BS EN 61058-1 - SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| 13/30253221 DC : 0 | BS EN 62752 - IN-CABLE CONTROL AND PROTECTIVE DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| BS 88-3(2010) : 2010 COR 2014 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| IEC TR 61818:2003 | Application guide for low-voltage fuses |
| IEC 60077-5:2003 | Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses |
| 09/30203506 DC : 0 | BS EN 61534-1 - POWER TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| IEC TS 62446-3:2017 | Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 3: Photovoltaic modules and plants - Outdoor infrared thermography |
| PD IEC/TR 61912-1:2007 | Low-voltage switchgear and controlgear. Overcurrent protective devices Application of short-circuit ratings |
| IEC TR 60146-6:1992 | Semiconductor convertors - Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses |
| 07/30169774 DC : 0 | BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING |
| BS IEC 61892-3:2012 | Mobile and fixed offshore units. Electrical installations Equipment |
| BS EN 60269-6:2011 | Low-voltage fuses Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| NF EN 50300 : 2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS |
| PD IEC/TS 62446-3:2017 | Photovoltaic (PV) systems. Requirements for testing, documentation and maintenance Photovoltaic modules and plants. Outdoor infrared thermography |
| NF EN 60947-4-2 : 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-2: CONTACTORS AND MOTOR-STARTERS - A.C. SEMICONDUCTOR MOTOR CONTROLLERS AND STARTERS |
| CSA E60079.5 : 2002 : R2011 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS |
| DIN EN 61881 : 2000 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| NF EN 60269-6 : 2011 | LOW-VOLTAGE FUSES - PART 6: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SOLAR PHOTOVOLTAIC ENERGY SYSTEMS |
| CEI UNI EN 45510-2-2 : 1999 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-2: ELECTRICAL EQUIPMENT - UNINTERRUPTIBLE POWER SUPPLIES |
| BS EN 62606:2013 | General requirements for arc fault detection devices |
| BS EN 60309-1 : 1999 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60947-4-1:2010 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009 (EQV)) |
| I.S. EN 62052-31:2016 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS |
| BS EN 115-1:2017 | Safety of escalators and moving walks Construction and installation |
| I.S. HD 60269-3:2010 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F (IEC 60269-3:2010 (MOD)) |
| UNE-EN 60269-6:2012 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| IEC 60898:1995 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations |
| NF EN 60730 2-4 : 2008 | AUTOMATIC CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| NF HD 60269-2 : 2007 | LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO I |
| NF EN 60947-1 : 2007 AMD 2 2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| BIS IS/IEC 60947-4-1 : 2000 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4: CONTACTORS AND MOTOR-STARTERS - SECTION 1: ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| S.R. CLC/TR 60269-5:2011 | LOW-VOLTAGE FUSES - PART 5: GUIDANCE FOR THE APPLICATION OF LOW-VOLTAGE FUSES |
| I.S. EN 62196-1:2014 | PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60730-2-4:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| DIN EN 81-22:2014-12 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
| IEC 60127-7:2015 | Miniature fuses - Part 7: Miniature fuse-links for special applications |
| 02/203840 DC : DRAFT MAY 2002 | IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| PD IEC/TR 60269-5:2010 | Low-voltage fuses Guidance for the application of low-voltage fuses |
| IEC 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| BS EN 45510-2-2:1999 | Guide for the procurement of power station equipment. Electrical equipment Uninterruptible power supplies - Uninterruptible power supplies for power plants |
| BS EN 60204-1 : 2006 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| IEC 60269-6:2010 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| BS EN 60204-32:2008 | Safety of machinery. Electrical equipment of machines Requirements for hoisting machines |
| PD ISO/TR 14799-1:2005 | Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| EN 60309-1:1999/A1:2007/AC:2014 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012) |
| EN 60931-1:1996/A1:2003 | SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 KV - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDE FOR INSTALLATION AND OPERATION |
| EN 61036:1996/A1:2000 | ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2) |
| EN 60730-2-4:2007 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-4: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR-COMPRESSORS OF HERMETIC AND SEMI-HERMETIC TYPE |
| EN 61881:1999 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| CLC/TR 50480:2011 | Determination of cross-sectional area of conductors and selection of protective devices |
| EN 60947-7-2:2009 | Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |
| EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| EN 60127-7:2016 | Miniature fuses - Part 7: Miniature fuse-links for special applications |
| IEC 61071:2017 RLV | Capacitors for power electronics |
| HD 60269-3:2010/A1:2013 | LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| EN 61071:2007 | Capacitors for power electronics |
| HD 60269-2:2013 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| EN 60974-6:2016 | Arc welding equipment - Part 6: Limited duty equipment |
| EN 50463:2007 | Railway applications - Energy measurement on board trains |
| EN 60269-2:1995/A2:2002 | LOW-VOLTAGE FUSES - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) |
| CEI 18-58 : 2013 | MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT |
| EN 50300:2004 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| BS 88-4(1988) : 1988 AMD 14545 | CARTRIDGE FUSES FOR VOLTAGES UP TO AND INCLUDING 1000 V A.C. AND 1500 V D.C. - SPECIFICATION OF SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| CSA C22.2 No. 61058.1 : 2009 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS 88-4(2007) : 2007 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES |
| CSA C22.2 No. 61058.1 : 2009 : R2014 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS 88-4(2009) : 2009 + A2 2016 | LOW-VOLTAGE FUSES - PART 4: SUPPLEMENTARY REQUIREMENTS FOR FUSE-LINKS FOR THE PROTECTION OF SEMICONDUCTOR DEVICES (IEC 60269-4:2009) |
| CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 60269-4:2009+AMD1:2012+AMD2:2016 CSV | Low-voltage fuses - Part 4: Supplementary requirements forfuse-links for the protection of semiconductor devices |
| IEC 60269-6:2010 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| IEC 60127:1974 | Cartridge fuse-links for miniature fuses |
| SA/SNZ TS 62446.3:2020 | Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance Photovoltaic modules and plants - Outdoor infrared thermography (IEC TS 62446-3:2017, MOD) |
| IEC 60050-441:1984 | International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
| IEC 60269-2:2013+AMD1:2016 CSV | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| ISO 478:1974 | Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60269-3:2010+AMD1:2013 CSV | Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
| IEC 60364-3:1993 | Electrical installations of buildings - Part 3: Assessment of general characteristics |
| AS/NZS 5139:2019 | Electrical installations - Safety of battery systems for use with power conversion equipment |
| ISO 4046:1978 | Paper, board, pulp and related terms — Vocabulary |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| ISO 593:1974 | Paper Untrimmed stock sizes for the ISO-A Series ISO supplementary range |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.