IEC 60092-202:2016
Current
The latest, up-to-date edition.
Electrical installations in ships - Part 202: System design - Protection
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French
09-19-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Electrical load study
6 Short-circuit current calculations
7 Protection discrimination study
8 Characteristics and choice of protective devices
with reference to short-circuit rating
9 Choice of protective devices with reference to
overload
10 Choice of protective devices with regard to
their application
11 Reverse power and reverse current protection
for AC generators
12 Undervoltage protection
13 Overvoltage protection
14 Protection against under- and over-frequency
Bibliography
IEC 60092-202:2016 is applicable to the main features of the electrical protective system to be applied to electrical installations for use in ships. This fifth edition cancels and replaces the fourth edition published in 1994 and Amendment 1:1996. This edition constitutes a full technical revision.
| Committee |
TC 18
|
| DevelopmentNote |
Stability Date: 2020. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
39
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS F 8063:2006 | Identical |
| BS IEC 60092-202:2016 | Identical |
| NEN IEC 60092-202 : 2016 | Identical |
| UNE 21135-202:1992 | Identical |
| UNE-IEC 60092-202:2010 | Identical |
| PN IEC 92-202 : 1994 | Identical |
| CEI 18-4 : 1ED 1983 | Identical |
| CEI IEC 60092-202:2021 | Identical |
| NEN 10092-202 : 1995 AMD 1 1996 | Identical |
| CEI 18-45 : 2000 | Identical |
| UNE-EN ISO 16315:2016 | Small craft - Electric propulsion system (ISO 16315:2016) |
| CEI EN 60092-507 : 2016 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| 12/30260078 DC : 0 | BS EN 60092-502 IEC 60092-502 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES |
| BS EN 60092-507:2015 | Electrical installations in ships Small vessels |
| I.S. EN ISO 16315:2016 | SMALL CRAFT - ELECTRIC PROPULSION SYSTEM (ISO 16315:2016) |
| ISO 13617:2001 | Ships and marine technology Shipboard incinerators Requirements |
| IEC 60092-504:2016 RLV | Electrical installations in ships - Part 504: Automation, control and instrumentation |
| BS IEC 60092-504:2016 | Electrical installations in ships Automation, control and instrumentation |
| 13/30278886 DC : 0 | BS EN 60092-501 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 501: SPECIAL FEATURES - ELECTRIC PROPULSION PLANT |
| NF EN 60092 507 : 2015 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| 13/30283500 DC : 0 | BS EN 60533 ED 3.0 - ELECTRICAL AND ELECTRONIC INSTALLATIONS IN SHIPS - ELECTROMAGNETIC COMPATIBILITY |
| BS IEC 60092-502:1999 | Electrical installation in ships Tankers. Special features |
| IEC 61363-1:1998 | Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c. |
| IEC 60092-504:2016 | Electrical installations in ships - Part 504: Automation, control and instrumentation |
| IEC 60092-501:2013 | Electrical installations in ships - Part 501: Special features - Electric propulsion plant |
| I.S. EN 60092-507:2015 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| IEC 60533:2015 | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
| IEC 60092-503:2007 | Electrical installations in ships - Part 503: Special features - AC supply systems with voltages in the range of above 1 kV up to and including 15 kV |
| 13/30292538 DC : 0 | BS EN 60092-507 ED 3.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| NF EN ISO 16315 : 2016 | SMALL CRAFT - ELECTRIC PROPULSION SYSTEM |
| 18/30371445 DC : 0 | BS ISO 13617 - SHIPS AND MARINE TECHNOLOGY - SHIPBOARD INCINERATORS - REQUIREMENTS |
| BS IEC 61363-1:1998 | Electrical installations of ships and mobile and fixed offshore units Procedures for calculating short-circuit currents in three-phase a.c. |
| 02/201465 DC : DRAFT NOV 2002 | IEC 60092-508 ED. 1 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 508: SWITCHGEAR AND CONTROLGEAR ASSEMBLIES FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 15 KV |
| DIN EN ISO 16315:2016-08 | SMALL CRAFT - ELECTRIC PROPULSION SYSTEM (ISO 16315:2016) |
| CEI 18-54 : 2003 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: SPECIAL FEATURES - CONTROL AND INSTRUMENTATION |
| CEI 18-48 : 2000 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 302: LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES |
| IEC 60092-507:2014 | Electrical installations in ships - Part 507: Small vessels |
| BS IEC 60092-501:2013 | Electrical installations in ships Special features. Electric propulsion plant |
| IEC 60092-502:1999 | Electrical installations in ships - Part 502: Tankers - Special features |
| BS IEC 60092-302:1997 | Electrical installation in ships Low-voltage switchgear and controlgear assemblies |
| BS IEC 60092-503:2007 | Electrical installations in ships Special features. AC supply systems with voltages in the range of above 1 kV up to and including 15 kV |
| BS ISO 13617:2001 | Ships and marine technology. Shipboard incinerators. Requirements |
| IEC 60092-201:1994 | Electrical installations in ships - Part 201: System design - General |
| IEEE 45.3-2015 | IEEE Recommended Practice for Shipboard Electrical Installations -- Systems Engineering |
| ISO 16315:2016 | Small craft Electric propulsion system |
| EN 60092-507:2015/AC:2015 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| EN ISO 16315:2016 | Small craft - Electric propulsion system (ISO 16315:2016, Corrected version 2021-11) |
| BS IEC 60533:2015 | Electrical and electronic installations in ships. Electromagnetic compatibility (EMC). Ships with a metallic hull |
| 15/30302640 DC : 0 | BS IEC 60092-504 ED 4.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION |
| IEC 60533:2015 RLV | Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
| IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV | High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
| IEC TR 60909-1:2002 | Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0 |
| IEC 60909-0:2016 | Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
| IEC 61363-1:1998 | Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c. |
| IEC 61660-1:1997 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.