ICC IBC INTERNATIONAL BUILDING CODE:2021
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
International Building Code
Available format(s)
Hardcopy , PDF
Superseded date
10-07-2024
Superseded by
Language(s)
English
Published date
09-01-2021
Publisher
The provisions of this code shall apply to the construction, alteration, relocation, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition of every building or structure or any appurtenances connected or attached to such buildings or structures.
| DocumentType |
Standard
|
| ISBN |
978-1-60983-955-0
|
| Pages |
832
|
| ProductNote |
THIS STANDARD ASLO REFERS TO : ASM 35-2000,AAMA/WDMA/CSA 101/I.S.2/A440—17,AISI S100-2016(2020),AISI S202—20,AISI S220—20,AISI S230—2019,AISI S240—20,AISI S400—20,ALI ALCTV—2016,ANSI A13.1-2020,A108.1A—17,A108.1B—17,A108.4—09,A108.5—19,A108.6—19,A108.8—19,A108.9—19,A108.10—17,A118.1—18,A118.3—20,A118.4—18,A118.5—99,A118.6—19,A118.8—99,A136.1—19,A137.3—17,Z 97.1—14,ANSI 117-2020,ANSI/APA A190.1—2017,ANSI/APA PRG 320—2019,ANSI/APA PRP 210—2019,ANSI/APA PRR 410—16,APA PDS Supplement 1—12,APA PDS Supplement 2—12,APA PDS Supplement 3—12,APA PDS Supplement 4—12,APA PDS Supplement 5—16,APA PDS—20,APA R540—19,APA S475—20,APA S560—20,APA T300—16,APA X440—17,APA X450—18,EP 484.3 DEC2017,EP 486.3 SEP2017,EP 559.1 W/Corr. AUG2010(R2014),ASCE/SEI 8-20,ASCE/SEI 29-19,ASHRAE 170-2017,ASME A90.1-2020,ANSI/ASSE Z359.1-2019,ANSI/AWC NDS—2018,ANSI/AWC PWF—2021,ANSI/AWC SDPWS—2021,ANSI/AWC WFCM—2018,AWC STJR—2021,AWC WCD No. 4—2003,AWCI 12-B—14,AWPA C1—03,AWPA M4—15,AWPA U1—20,AWS D1.4/D1.4M—2018,BHMA A156.19—2020,ANSI A135.4—2012,ANSI A135.5—2012,ANSI A135.6—2012,ANSI A208.1—2016,16 CFR Part 1201 (2002),16 CFR Part 1209 (2002),16 CFR Part 1404 (2002),16 CFR Part 1500 (2009),16 CFR Part 1500.44 (2009),16 CFR Part 1507 (2002),16 CFR Part 1630 (2007),ANSI/DASMA 107—2017,ANSI/DASMA 108—2017,ANSI/DASMA 115—2017,DOC PS 1—19,DOC PS 2—18,DOC PS 20—05,29 CFR Part 1910.1000 (2015),49 CFR 173.192—2011,49 CFR 173.192—2011,49 CFR Parts 173–178—2015,49 CFR Parts 173.137—(2009),FEMA-TB-11—01,FM 4474-2011,GA-216—2018,GA-600—2018,ICC 500—2020,ICC 600—2020,ICC 900/SRCC 300—2020,ICC 901/SRCC 100—2020,ICC 1100—18,IEBC—21,IECC—21,IFC—21,IFGC—21,IPMC—21,IPSDC—21,IRC—21,ISPSC—21,IWUIC—21,SBCCI SSTD 11—97,ANSI MH29.1—08,NAAMM FP 1001-18,NCMA TEK 5-8B(2005),PTI DC—10.5-19,ANSI/SBCA FS 100—2012(R2018),SDI NC—2017,SDI RD—2017,SDI-C—2017,SDI-QA/QC—2017,SJI 100—20,SJI 200—15,ANSI/SPRI RP-4—2019,ANSI/SPRI RP-4—2019,ANSI/SPRI/FM 4435/ES-1—2017,ANSI/SPRI GT-1—2016,TMS 216-2014,TMS 302-2018,TMS 402-2016,TMS 403-2017,TMS 404-2016,TMS 504-2016,TMS 602-2016,TMS 604-2016,TPI 1-2014,18 USC Part 1, Ch. 40,WRI/CRSI—81,NFPA 10-21,NFPA 17A-20,NFPA 268-19,
|
| PublisherName |
International Code Council (ICC)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ICC IZC International Zoning Code:2021 | International Zoning Code |
| ICC 900/ SRCC 300:2020 | Solar Thermal System Standard |
| ASTM A 875/A875M : 2013 | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
| TIA 222 : H2017 | STRUCTURAL STANDARD FOR ANTENNA SUPPORTING STRUCTURES AND ANTENNAS AND SMALL WIND TURBINE SUPPORT STRUCTURES |
| ASME A17.1-2019/CSA B44:19 | Safety code for elevators and escalators (Binational standard with ASME A17.1) |
| ASTM C 1002 : 2018 | Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
| ASTM C 956 : 2004 : R2015 | Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete |
| ASTM C 270 : 2014 : REV A | Standard Specification for Mortar for Unit Masonry |
| NFPA 111 : 2019 | Standard on Stored Electrical Energy Emergency and Standby<br>Power Systems. |
| NFPA 654 : 2020 | Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids |
| ASTM B 43 : 2015 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
| ASTM C 216 : 2017 : REV A | Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) |
| NFPA 701:2019 | Standard Methods of Fire Tests for Flame Propagation of Textiles and Films |
| ASTM C 840 : 2018 : REV A | Standard Specification for Application and Finishing of Gypsum Board |
| UL 9:8ED 2009-07-02 | Standard for Fire Tests of Window Assemblies |
| NFPA 664:2020 | Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities |
| NFPA 31:2020 | Standard for the Installation of Oil-Burning Equipment |
| ASTM B 280 : 2018 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
| ASTM A 690/A690M : 2013 : REV A : R2018 | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments |
| ISO 1496-1:2013 | Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes |
| ASCE/SEI 55 16 : 2016 | TENSILE MEMBRANE STRUCTURES |
| ASTM A 755/A755M : 2016 : EDT 1 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM C 587 : 2004 : R2018 | Standard Specification for Gypsum Veneer Plaster |
| ASTM C 31/C31M : 2018 : REV B | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C 957/C957M : 2017 | Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
| ASTM C 473 : 2017 | Standard Test Methods for Physical Testing of Gypsum Panel Products |
| ISO 6346:1995 | Freight containers Coding, identification and marking |
| NFPA 80 : 2019 | Standard for Fire Doors and Other Opening Protectives |
| UL 864:10ED 2014-12-01 | Standard for Control Units and Accessories for Fire Alarm Systems |
| NFPA 4:2021 | Standard for Integrated Fire Protection and Life Safety System Testing |
| ASTM C 59/C59M : 2000 : R2015 | Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM C 33/C33M : 2018 | Standard Specification for Concrete Aggregates |
| ASTM B 209 : 2014 | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| NFPA 120 : 2020 | Standard for Fire Prevention and Control in Coal Mines |
| NFPA 253:2019 | Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source |
| ASTM C 475/C475M : 2017 | Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
| ASTM C 474 : 2015 | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
| ASTM C 836/C836M : 2018 | Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course |
| ASTM C 94/C94M : 2017 : REV A | Standard Specification for Ready-Mixed Concrete |
| ASTM C 331/C331M : 2017 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM C 5 : 2018 | Standard Specification for Quicklime for Structural Purposes |
| ASTM C 472 : 1999 : R2014 | Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete |
| ASTM C 635/C635M : 2017 | Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings |
| ASTM C 1007 : 2011 : REV A : R2015 | Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories |
| ASTM C 140/C140M : 2018 | Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units |
| ASTM C 28/C28M : 2010 : R2015 | Standard Specification for Gypsum Plasters |
| ASTM B 695 : 2004 : R2016 | Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel |
| UL 1784:4ED 2015-02-17 | Air Leakage Tests of Door Assemblies and Other Opening Protectives |
| ASME A17.7-2007/CSA B44.7-07 (R2017) | Performance-Based Safety Code for Elevators and Escalators (Bi-National standard, with ASME A17.7) |
| ASTM C 652 : 2017 : REV A | Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) |
| NFPA 16 : 2019 | Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spray Systems |
| ASTM C 946 : 2018 | Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls |
| ASTM A 722/A722M : 2018 | Standard Specification for High-Strength Steel Bars for Prestressed Concrete |
| NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
| EN 459-1:2015 | Building lime - Part 1: Definitions, specifications and conformity criteria |
| UL 2200:2ED 2012-06-01 | Standard for Stationary Engine Generator Assemblies |
| ICC IMC International Mechanical Code : 2021 | International Mechanical Code |
| ASTM C 1032 : 2018 | Standard Specification for Woven Wire Plaster Base |
| ASTM A 153/A153M : 2016 : REV A | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
| BS EN 15250:2007 | Slow heat release appliances fired by solid fuel. Requirements and test methods |
| NFPA 20 : 2019 | Standard for the Installation of Stationary Pumps for Fire Protection |
| ASTM B 251/B251M : 2017 | Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube |
| ANSI MH16.3 : 2016 | Design, Testing, and Utilization of Industrial Steel Cantilevered Storage Racks |
| AITC 200 : 2009 | MANUFACTURING QUALITY CONTROL SYSTEMS MANUAL |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| NFPA 13D : 2019 | Standard for the Installation of Sprinkler Systems in One- and Two-Family Dwellings and Manufactured Homes |
| ASTM C 62 : 2017 | Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
| UL 10B:10ED 2008-02-07 | Standard for Fire Tests of Door Assemblies |
| ACI 318 : 2019 | Building Code Requirements for Structural Concrete and Commentary |
| NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| ASTM A 653/A653M : 2017 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
| NFPA 259 : 2018 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
| ASTM C 208 : 2012 : R2017 : EDT 1 | Standard Specification for Cellulosic Fiber Insulating Board |
| NFPA 275 : 2017 | STANDARD METHOD OF FIRE TESTS FOR THE EVALUATION OF THERMAL BARRIERS |
| UL 1040:1ED 1996-08-09 | Fire Test of Insulated Wall Construction |
| ACI 117:2010 | SPECIFICATION FOR TOLERANCES FOR CONCRETE CONSTRUCTION AND MATERIALS AND COMMENTARY |
| ASTM C 172/C172M : 2017 | Standard Practice for Sampling Freshly Mixed Concrete |
| NFPA 82 : 2019 | Incinerators and Waste and Linen Handling Systems and Equipment |
| ASTM C 150/C150M : 2018 | Standard Specification for Portland Cement |
| ISO 8336:2009 | Fibre-cement flat sheets Product specification and test methods |
| NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| NFPA 30:2021 | Flammable and Combustible Liquids Code |
| NFPA 40 : 2019 | Standard for the Storage and Handling of Cellulose Nitrate Film |
| ASTM C 22/C22M : 2000 : R2015 | Standard Specification for Gypsum |
| NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| ASTM C 55 : 2017 | Standard Specification for Concrete Building Brick |
| UL 2075:2ED 2013-03-05 | Gas and Vapor Detectors and Sensors |
| ASTM C 90 : 2016 : REV A | Standard Specification for Loadbearing Concrete Masonry Units |
| ICC IPC International Plumbing Code : 2021 | International Plumbing Code |
| AISC 360 : 2016 | SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
| NFPA 285:2019 | Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Wall Assemblies Containing Combustible Components<br> |
| ASTM C 920 : 2018 | Standard Specification for Elastomeric Joint Sealants |
| ASTM A 283/A283M : 2018 | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates |
| ISO 8115:1986 | Cotton bales Dimensions and density |
| ASCE/SEI 49 12 : 2012 | WIND TUNNEL TESTING FOR BUILDINGS AND OTHER STRUCTURES |
| ASTM A 36/A36M : 2014 | Standard Specification for Carbon Structural Steel |
| NFPA 289:2019 | Standard Method of Fire Test for Individual Fuel Packages |
| NFPA 45:2019 | Standard on Fire Protection for Laboratories Using Chemicals |
| AITC 119 : 1996 | STANDARD SPECIFICATIONS FOR STRUCTURAL GLUED LAMINATED TIMBER OF HARDWOOD SPECIES |
| ASTM C 841 : 2003 : R2018 | Standard Specification for Installation of Interior Lathing and Furring |
| UL 723:11ED 2018-04-19 | Test for Surface Burning Characteristics of Building Materials |
| AITC 104 : 2003 | TYPICAL CONSTRUCTION DETAILS |
| NFPA 484 : 2019 | Standard for Combustible Metals |
| NFPA 85:2019 | Boiler and Combustion Systems Hazards Code |
| ASTM C 844 : 2015 | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
| NFPA 58:2020 | Liquefied Petroleum Gas Code. |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| ASTM C 887 : 2013 | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
| ACI 216.1 : 2014 | CODE REQUIREMENTS FOR DETERMINING FIRE RESISTANCE OF CONCRETE AND MASONRY CONSTRUCTION ASSEMBLIES |
| UL 127:9ED 2011-04-21 | Standard for Factory-Built Fireplaces |
| UL 2196:2ED 2017-08-29 | Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables |
| ASTM C 726 : 2017 | Standard Specification for Mineral Wool Roof Insulation Board |
| NFPA 105:2019 | Standard for Smoke Door Assemblies and Other Opening Protectives<br> |
| ASTM C 206 : 2014 | Standard Specification for Finishing Hydrated Lime |
| ASTM B 68/B68M : 2011 | Standard Specification for Seamless Copper Tube, Bright Annealed |
| ASTM C 754 : 2018 | Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products |
| ICC 300 : 2017 | Standard for Bleachers, Folding and Telescopic Seating, and Grandstands |
| ASTM C 27 : 1998 : R2018 | Standard Classification of Fireclay and High-Alumina Refractory Brick |
| ICC A117.1 : 2017 | Standard for Accessible and Usable Buildings and Facilities |
| NFPA 221:2021 | Standard for High Challenge Fire Walls, Fire Walls, and Fire Barrier Walls |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| ASTM C 552 : 2017 : EDT 1 | Standard Specification for Cellular Glass Thermal Insulation |
| ASTM C 595/C595M : 2018 | Standard Specification for Blended Hydraulic Cements |
| ASTM C 954 : 2018 | Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
| ASTM B 370 : 2012 | Standard Specification for Copper Sheet and Strip for Building Construction |
| ASTM C 631 : 2009 : R2014 | Standard Specification for Bonding Compounds for Interior Gypsum Plastering |
| NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| NFPA 99:2021 | Health Care Facilities Code |
| ASTM C 199 : 1984 : R2016 | Standard Test Method for Pier Test for Refractory Mortars |
| ASTM C 547 : 2017 | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 514 : 2004 : R2014 | Standard Specification for Nails for the Application of Gypsum Board |
| ASTM C 932 : 2006 : R2013 | Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering |
| ASTM C 897 : 2015 | Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters |
| ASTM A 463/A463M : 2015 | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
| ASTM C 35 : 2001 : R2014 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM C 728 : 2017 : REV A | Standard Specification for Perlite Thermal Insulation Board |
| ISO 668:2013 | Series 1 freight containers Classification, dimensions and ratings |
| NFPA 652 : 2019 | FUNDAMENTALS OF COMBUSTIBLE DUST |
| NFPA 72:2019 | National Fire Alarm and Signaling Code |
| NFPA 14 : 2019 | Standard for the Installation of Standpipe and Hose Systems |
| ASTM A 924/A924M : 2017 : REV A | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process |
| ASTM A 792/A792M : 2010 : R2015 | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
| ASME B20.1:2021 | Safety Standard for Conveyors and Related Equipment |
| NFPA 409 : 2016 | AIRCRAFT HANGARS |
| ASTM A 615/A615M : 2015 : REV A : EDT 1 | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement |
| NFPA 110:2019 | Standard for Emergency and Standby Power Systems |
| ASTM C 926 : 2018 : REV B | Standard Specification for Application of Portland Cement-Based Plaster |
| ASTM C 317/C317M : 2000 : R2015 | Standard Specification for Gypsum Concrete |
| NFPA 265:2019 | Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls<br> |
| ASTM C 67/C67M : 2018 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| NFPA 257 : 2017 | FIRE TEST FOR WINDOW AND GLASS BLOCK ASSEMBLIES |
| NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
| UL 924:10ED 2016-05-09 | Emergency Lighting and Power Equipment |
| ASTM A 416/A416M : 2017 : REV A | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete |
| ICC 400 : 2017 | Standard on the Design and Construction of Log Structures |
| ASTM C 843 : 2017 | Standard Specification for Application of Gypsum Veneer Plaster |
| NFPA 70 : 2020 | National Electrical Code (NEC) Softbound |
| NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
| ASTM B 42 : 2015 : REV A | Standard Specification for Seamless Copper Pipe, Standard Sizes |
| ASTM C 73 : 2017 | Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) |
| ASTM C 847 : 2014 : REV A | Standard Specification for Metal Lath |
| ASTM C 141/C141M : 2014 | Standard Specification for Hydrated Hydraulic Lime for Structural Purposes |
| ANSI MH16.1 : 2012 | SPECIFICATION FOR THE DESIGN, TESTING AND UTILIZATION OF INDUSTRIAL STEEL STORAGE RACKS |
| ASTM A 588/A588M : 2015 | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
| NFPA 276 : 2019 | Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components |
| ASCE/SEI 24 14 : 2014 | FLOOD RESISTANT DESIGN AND CONSTRUCTION |
| ASTM A 572/A572M : 2018 | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
| NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
| ASTM B 101 : 2012 | Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction |
| UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
| ASTM C 578 : 2018 | Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation |
| NFPA 13 : 2019 | Standard for the Installation of Sprinkler Systems |
| NFPA 30A:2021 | Code for Motor Fuel Dispensing Facilities and Repair Garages |
| NFPA 2010 : 2020 | Standard for Fixed Aerosol Fire Extinguishing Systems |
| ASTM C 636/C636M : 2013 | Standard Practice for Installation of Metal Ceiling Suspension Systems for<brk/> Acoustical Tile and Lay-In Panels |
| ASTM C 330/C330M : 2017 : REV A | Standard Specification for Lightweight Aggregates for Structural Concrete |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| ASTM C 406/C406M : 2015 | Standard Specification for Roofing Slate |
| AITC 110 : 2001 | STANDARD APPEARANCE GRADES FOR STRUCTURAL GLUED LAMINATED TIMBER |
| NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
| ASTM C 1029 : 2015 | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
| ASTM A 252 : 2010 : R2018 | Standard Specification for Welded and Seamless Steel Pipe Piles |
| ASTM C 744 : 2016 | Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
| FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
| ASTM C 842 : 2005 : R2015 | Standard Specification for Application of Interior Gypsum Plaster |
| NFPA 13R:2019 | Standard for the Installation of Sprinkler Systems in Low-Rise Residential Occupancies |
| AITC 113 : 2010 | STANDARD FOR DIMENSIONS OF STRUCTURAL GLUED LAMINATED TIMBER |
| ASTM C 61/C61M : 2000 : R2015 | Standard Specification for Gypsum Keene's Cement |
| NFPA 101:2021 | Life Safety Code |
| ASTM C 549 : 2006 : R2012 | Standard Specification for Perlite Loose Fill Insulation |
| NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
| ASTM A 240/A240M : 2017 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM B 88 : 2016 | Standard Specification for Seamless Copper Water Tube |
| ASTM C 91/C91M : 2018 | Standard Specification for Masonry Cement |
| ASCE 32 01 : 2001 | DESIGN AND CONSTRUCTION OF FROST-PROTECTED SHALLOW FOUNDATIONS |
| ASTM C 933 : 2018 | Standard Specification for Welded Wire Lath |
| ASME B31.3:2020 | Process Piping |
| NFPA 418 : 2016 | HELIPORTS |
| ASTM A 706/A706M : 2016 | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| NFPA 92 : 2018 | SMOKE CONTROL SYSTEMS |
| NFPA 211:2019 | Standard for Chimneys, Fireplaces, Vents, and Solid Fuel–Burning Appliances |
| ASTM C 557 : 2003 : R2017 | Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing |
| ASTM C 315 : 2007 : R2016 | Standard Specification for Clay Flue Liners and Chimney Pots |
| ASTM A 6/A6M : 2017 : REV A | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
| ASTM C 516 : 2008 : R2013 : EDT 1 | Standard Specification for Vermiculite Loose Fill Thermal Insulation |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.