ICC 2012 INTERNATIONAL BUILDING CODE : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INTERNATIONAL BUILDING CODE
Hardcopy , PDF
07-13-2020
English
01-01-2012
CHAPTER 1 - SCOPE AND ADMINISTRATION
CHAPTER 2 - DEFINITIONS
CHAPTER 3 - USE AND OCCUPANCY CLASSIFICATION
CHAPTER 4 - SPECIAL DETAILED REQUIREMENTS BASED ON
USE AND OCCUPANCY
CHAPTER 5 - GENERAL BUILDING HEIGHTS AND AREAS
CHAPTER 6 - TYPES OF CONSTRUCTION
CHAPTER 7 - FIRE AND SMOKE PROTECTION FEATURES
CHAPTER 8 - INTERIOR FINISHES
CHAPTER 9 - FIRE PROTECTION SYSTEMS
CHAPTER 10 - MEANS OF EGRESS
CHAPTER 11 - ACCESSIBILITY
CHAPTER 12 - INTERIOR ENVIRONMENT
CHAPTER 13 - ENERGY EFFICIENCY
CHAPTER 14 - EXTERIOR WALLS
CHAPTER 15 - ROOF ASSEMBLIES AND ROOFTOP STRUCTURES
CHAPTER 16 - STRUCTURAL DESIGN
CHAPTER 17 - STRUCTURAL TESTS AND SPECIAL INSPECTIONS
CHAPTER 18 - SOILS AND FOUNDATIONS
CHAPTER 19 - CONCRETE
CHAPTER 20 - ALUMINUM
CHAPTER 21 - MASONRY
CHAPTER 22 - STEEL
CHAPTER 23 - WOOD
CHAPTER 24 - GLASS AND GLAZING
CHAPTER 25 - GYPSUM BOARD AND PLASTER
CHAPTER 26 - PLASTIC
CHAPTER 27 - ELECTRICAL
CHAPTER 28 - MECHANICAL SYSTEMS
CHAPTER 29 - PLUMBING SYSTEMS
CHAPTER 30 - ELEVATORS AND CONVEYING SYSTEMS
CHAPTER 31 - SPECIAL CONSTRUCTION
CHAPTER 32 - ENCROACHMENTS INTO THE PUBLIC RIGHT-OF-WAY
CHAPTER 33 - SAFEGUARDS DURING CONSTRUCTION
CHAPTER 34 - EXISTING STRUCTURES
CHAPTER 35 - REFERENCED STANDARDS
APPENDIX A - EMPLOYEE QUALIFICATIONS
APPENDIX B - BOARD OF APPEALS
APPENDIX C - GROUP U - AGRICULTURAL BUILDINGS
APPENDIX D - FIRE DISTRICTS
APPENDIX E - SUPPLEMENTARY ACCESSIBILITY REQUIREMENTS
APPENDIX F - RODENTPROOFING
APPENDIX G - FLOOD-RESISTANT CONSTRUCTION
APPENDIX H - SIGNS
APPENDIX I - PATIO COVERS
APPENDIX J - GRADING
APPENDIX K - ADMINISTRATIVE PROVISIONS
APPENDIX L - EARTHQUAKE RECORDING INSTRUMENTATION
APPENDIX M - TSUMANI-GENERATED FLOOD HAZARD
INDEX
Describes provisions applicable to the construction, alteration, relocation, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition of every building or structure or any appurtenances connected or attached to such buildings or structures. Does not apply to detached one- and two-family dwellings and townhouses up to three stories.
DocumentType |
Standard
|
Pages |
725
|
PublisherName |
International Code Council (ICC)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ICC 2012 INT. PROPERTY MAINT. CODE : 2012 | INTERNATIONAL PROPERTY MAINTENANCE CODE |
ASHRAE HDBK SMOKE CONTROL ENGINEERING : 2012 | HANDBOOK OF SMOKE CONTROL ENGINEERING |
ASHRAE HDBK HVAC APPLICATIONS : 2015 | ASHRAE HANDBOOK - HVAC APPLICATIONS |
ACI 560R : 2016 | REPORT ON DESIGN AND CONSTRUCTION WITH INSULATING CONCRETE FORMS (ICFS) |
NEMA SB 20:2015 | Guide to Understanding Smoke Control Systems |
NEMA SB 11 : 2011 | GUIDE FOR PROPER USE OF SYSTEM SMOKE DETECTORS |
ICC 2012 INT. PVT. SEWAGE DISP.CODE : 2012 | INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE |
ICC 2012 INTERNATIONAL PERFORM. CODE : 2012 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
ICC IEBC CODE AND COMMENTARY : 2015 | IEBC® Code and Commentary |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
ICC 2012 INT. EXIST. BUILDING CODE : 2012 | INTERNATIONAL EXISTING BUILDING CODE |
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
ICC 2012 INT. WILDLAND U.I. CODE : 2012 | INTERNATIONAL WILDLAND-URBAN INTERFACE CODE |
ICC 2012 INT. ENERGY CONSV. CODE : 2012 | INTERNATIONAL ENERGY CONSERVATION CODE |
UNI EN ISO 13706 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
ICC 2012 INTERNATIONAL ZONING CODE : 2012 | INTERNATIONAL ZONING CODE |
API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
MSS SP 127 : 2014 | BRACING FOR PIPING SYSTEMS: SEISMIC - WIND - DYNAMIC DESIGN, SELECTION, AND APPLICATION |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
ISO 13706:2011 | Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
EN ISO 13706:2011 | Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers (ISO 13706:2011) |
BS EN ISO 13706:2011 | Petroleum, petrochemical and natural gas industries. Aircooled heat exchangers |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
PIP ELSMC20 : 2011 | LOW-VOLTAGE AC ADJUSTABLE SPEED DRIVE SPECIFICATION |
PIP CVC01017 : 2011 | PLANT SITE DATA SHEET |
PIP ELSSG01 : 2010 | DESIGN AND FABRICATION OF LOW-VOLTAGE METAL-ENCLOSED AC POWER CIRCUIT BREAKER SWITCHGEAR |
PIP STC01015 : 2017 | STRUCTURAL DESIGN CRITERIA |
ASME QEI 1 : 2013 | STANDARD FOR THE QUALIFICATION OF ELEVATOR INSPECTORS |
PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
AWS D1.4 : 1998 | STRUCTURAL WELDING CODE - REINFORCING STEEL |
ASTM E 970 : 2017 : REDLINE | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
FM 4450 : 1989 | CLASS 1 INSULATED STEEL DECK ROOFS |
TIA 222 : H2017 | STRUCTURAL STANDARD FOR ANTENNA SUPPORTING STRUCTURES AND ANTENNAS AND SMALL WIND TURBINE SUPPORT STRUCTURES |
ACI 530 : 1995 | BUILDING CODE REQUIREMENTS FOR MASONRY STRUCTURES AND SPECIFICATIONS FOR MASONRY STRUCTURES AND RELATED COMMENTARIES |
ASTM D 4434/D4434M : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) Sheet Roofing |
ASTM D 422 : 1963 : R2002 : EDT 1 | Standard Test Method for Particle-Size Analysis of Soils |
ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
UL 103:11ED 2010-10-15 | Factory-Built Chimneys for Residential Type and Building Heating Appliances |
NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
UL 555:7ED 2006-07-12 | Fire Dampers |
ASTM C 1278/C1278M : 2017 : REDLINE | Standard Specification for Fiber-Reinforced Gypsum Panel |
UL 555C:4ED 2014-12-16 | Ceiling Dampers |
AITC A190.1 : 2007 | AMERICAN NATIONAL STANDARD, STRUCTURAL GLUED LAMINATED TIMBER |
NFPA 288 : 2017 | STANDARD METHODS OF FIRE TESTS OF HORIZONTAL FIRE DOOR ASSEMBLIES INSTALLED IN HORIZONTAL FIRE RESISTANCE-RATED ASSEMBLIES |
ANSI A118.3 : 1992 | SPECIFICATIONS FOR CHEMICAL RESISTANT, WATER CLEANABLE TILE-SETTING AND GROUTING EPOXY ADHESIVE |
UL 9:8ED 2009-07-02 | Standard for Fire Tests of Window Assemblies |
ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
ASTM D 1863 : 2005 | Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
ASTM D 1929 : 2016 : REDLINE | Standard Test Method for Determining Ignition Temperature of Plastics |
ASTM C 946 : 2010-02 | PRACTICE FOR CONSTRUCTION OF DRY-STACKED, SURFACE-BONDED WALLS |
ANSI Z97.1 : 2015 | SAFETY GLAZING MATERIALS USED IN BUILDINGS - SAFETY PERFORMANCE SPECIFICATIONS AND METHODS OF TEST |
ANSI A118.6 : 1992 | SPECIFICATIONS FOR CERAMIC TILE GROUTS |
NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
ASTM D 1143/D1143M : 2007 : R2013 : EDT 1 | Standard Test Methods for Deep Foundations Under Static Axial Compressive Load |
ASTM C 635/C635M : 2017 : REDLINE | Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings |
NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
ASTM D 4601 : 2004 | Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing |
FM 4470 : 2016 | SINGLE-PLY, POLYMER-MODIFIED BITUMEN SHEET, BUILT-UP ROOF (BUR) AND LIQUID APPLIED ROOF ASSEMBLIES FOR USE IN CLASS 1 AND NONCOMBUSTIBLE ROOF DECK CONSTRUCTION |
BHMA A156.19 : 2013 | POWER ASSIST AND LOW ENERGY POWER OPERATED DOORS |
NFPA 701 : 2015 | FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS |
NFPA 259 : 2013 | STANDARD TEST METHOD FOR POTENTIAL HEAT OF BUILDING MATERIALS |
ASTM D 3468 : 1999 | Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
ICC 500 : 2008 | STANDARD FOR THE DESIGN AND CONSTRUCTION OF STORM SHELTERS |
ASTM D 2178 : 2004 | Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing (Withdrawn 2013) |
ASTM C 62 : 2017 : REDLINE | Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) |
UL 864:10ED 2014-12-01 | Standard for Control Units and Accessories for Fire Alarm Systems |
NFPA 110 : 2016 | EMERGENCY AND STANDBY POWER SYSTEMS |
NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
ASTM C 206 : 2014 : REDLINE | Standard Specification for Finishing Hydrated Lime |
ASTM C 475/C475M : 2017 : REDLINE | Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board |
ASME A18.1 : 2017 | SAFETY STANDARD FOR PLATFORM LIFTS AND STAIRWAY CHAIRLIFTS |
ASTM C 744 : 2016 : REDLINE | Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units |
ASTM C 897 : 2015 : REDLINE | Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters |
ACI 318 : 2014 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE AND COMMENTARY |
ASTM E 1996 : 2017 : REDLINE | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
ASTM D 3909 : 1997 : REV B : R2004 : EDT 1 | Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules |
AISC 341 : 2016 | SEISMIC PROVISIONS FOR STRUCTURAL STEEL BUILDINGS |
ASTM C 212 : 2017 : REDLINE | Standard Specification for Structural Clay Facing Tile |
ASTM D 4945 : 2012 | Standard Test Method for High-Strain Dynamic Testing of Deep Foundations |
ASTM C 91 : 2005 | Standard Specification for Masonry Cement |
NFPA 101 : 2018 | LIFE SAFETY CODE |
ASTM A 706/A706M : 2016 : REDLINE | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
ASTM D 1761 : 2012 : REDLINE | Standard Test Methods for Mechanical Fasteners in Wood |
ASTM D 2626 : 2004 | Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing |
ASTM D 227 : 2003 | Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing |
ASTM D 5664 : 2017 : REDLINE | Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
ASTM C 331 : 2005 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
UL 1784:4ED 2015-02-17 | Standard for Air Leakage Tests of Door Assemblies and Other Opening Protectives |
ASTM F 547 : 2017 : REDLINE | Standard Terminology of Nails for Use with Wood and Wood-Base Materials |
UL 305:6ED 2012-07-12 | Panic Hardware |
ANSI A136.1 : 1992 | ORGANIC ADHESIVES FOR INSTALLATION OF CERAMIC TILE |
CGSB 37-GP-56M : 80 AMD 1 85 | MEMBRANE, MODIFIED, BITUMINOUS, PREFABRICATED, AND REINFORCED FOR ROOFING |
ASTM B 101 : 2012 : REDLINE | Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction |
ASTM A 875/A875M : 2013 : REDLINE | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process |
NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
ASTM C 844 : 2015 : REDLINE | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
CGSB 37-GP-52M : 1984 | ROOFING AND WATERPROOFING MEMBRANE, SHEET APPLIED, ELASTOMERIC |
NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
UL 2200:2ED 2012-06-01 | Standard for Stationary Engine Generator Assemblies |
AA CONSTRUCTION MANUAL SEC 5 : 1980 | SPECIFICATIONS FOR ALUMINUM SHEET METAL WORK IN BUILDING CONSTRUCTION |
ASME B31.3:2016 | PROCESS PIPING |
ASTM C 645 : 2014-11 | SPECIFICATION FOR NONSTRUCTURAL STEEL FRAMING MEMBERS |
ASTM C 1283 : 2015 : REDLINE | Standard Practice for Installing Clay Flue Lining |
ASME A13.1 : 2015 | SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
ASTM C 1288 : 2017 : REDLINE | Standard Specification for Fiber-Cement Interior Substrate Sheets |
NFPA 13R : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN LOW-RISE RESIDENTIAL OCCUPANCIES |
ASTM E 2570 : 2007 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
ASME B20.1 : 2015 | SAFETY STANDARD FOR CONVEYORS AND RELATED EQUIPMENT |
ASTM D 7254 : 2017 : REDLINE | Standard Specification for Polypropylene (PP) Siding |
AITC 200 : 2009 | MANUFACTURING QUALITY CONTROL SYSTEMS MANUAL |
ASTM E 2634 : 2017-06 | SPECIFICATION FOR FLAT WALL INSULATING CONCRETE FORM (ICF) SYSTEMS |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
ASTM E 1300 : 2016 : REDLINE | Standard Practice for Determining Load Resistance of Glass in Buildings |
ASTM C 843 : 2017 : REDLINE | Standard Specification for Application of Gypsum Veneer Plaster |
AMCA 540 : 2013 | TEST METHOD FOR LOUVERS IMPACTED BY WIND BORNE DEBRIS |
ASTM E 108 : 2017 : REDLINE | Standard Test Methods for Fire Tests of Roof Coverings |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
ASTM C 1328 : 2005 | Standard Specification for Plastic (Stucco) Cement |
ANSI A118.5 : 1992 | SPECIFICATIONS FOR CHEMICAL RESISTANT FURAN RESIN MORTARS AND GROUTS FOR TILE INSTALLATION |
UL 2079:5ED 2015-08-26 | Tests for Fire Resistance of Building Joint Systems |
ASME A90.1 : 2015 | SAFETY STANDARD FOR BELT MANLIFTS |
UL 10B:10ED 2008-02-07 | Standard for Fire Tests of Door Assemblies |
ASTM C 1029 : 2015 : REDLINE | Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation |
CFR 49(PTS100-177) : OCT 2017 | TRANSPORTATION |
ASTM A 913/A913M : 2015 : REDLINE | Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) |
ASTM E 2573 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
ANSI A118.8 : 1992 | SPECIFICATIONS FOR MODIFIED EPOXY EMULSION MORTAR GROUT |
NFPA 275 : 2017 | STANDARD METHOD OF FIRE TESTS FOR THE EVALUATION OF THERMAL BARRIERS |
UL 1040:1ED 1996-08-09 | Fire Test of Insulated Wall Construction |
ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
ANSI/BHMA A156.10 : 2017 | POWER OPERATED PEDESTRIAN DOORS |
ACI 530.1 : 1995 | SPECIFICATIONS FOR MASONRY STRUCTURES |
NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
ASTM D 6509/D6509M : 2016 : REDLINE | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements |
ASTM C 1396/C1396M : 2017 : REDLINE | Standard Specification for Gypsum Board |
ANSI A137.1 : 2012(R2013) | SPECIFICATIONS FOR CERAMIC TILE |
ASME B16.18 : 2012 | Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br> |
ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
ASTM D 5665 : 1999 : REV A : R2006 | Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing |
ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
ANSI A118.4 : 1992 | SPECIFICATIONS FOR LATEX PORTLAND CEMENT MORTAR |
ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
UL 1975:3ED 2006-11-27 | Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes |
AISC 360 : 2016 | SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
ASTM C 27 : 1998 | Standard Classification of Fireclay and High-Alumina Refractory Brick |
ISO 8115:1986 | Cotton bales Dimensions and density |
NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
ASTM E 2072 : 2014 : REDLINE | Standard Specification for Photoluminescent (Phosphorescent) Safety Markings (Withdrawn 2023) |
ASTM A 463/A463M : 2015 : REDLINE | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process |
ASTM D 4829 : 2011 : REDLINE | Standard Test Method for Expansion Index of Soils |
AITC 119 : 1996 | STANDARD SPECIFICATIONS FOR STRUCTURAL GLUED LAMINATED TIMBER OF HARDWOOD SPECIES |
ASTM C 754 : 2017-02 | SPECIFICATION FOR INSTALLATION OF STEEL FRAMING MEMBERS TO RECEIVE SCREW-ATTACHED GYPSUM PANEL PRODUCTS |
ICC 600 : 2008 | STANDARD FOR RESIDENTIAL CONSTRUCTION IN HIGH-WIND REGIONS |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
AITC 104 : 2003 | TYPICAL CONSTRUCTION DETAILS |
ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
ASTM E 331 : 2000 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
NFPA 92B : 2009 | SMOKE MANAGEMENT SYSTEMS IN MALLS, ATRIA, AND LARGE SPACES |
NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
ASTM C 615 : 2003 | Standard Specification for Granite Dimension Stone |
NFPA 32 : 2016 | DRYCLEANING FACILITIES |
ASTM G 152 : 2013 : REDLINE | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
ASTM E 136 : 2016-02 | TEST METHOD FOR BEHAVIOUR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C |
ACI 216.1 : 2014 | CODE REQUIREMENTS FOR DETERMINING FIRE RESISTANCE OF CONCRETE AND MASONRY CONSTRUCTION ASSEMBLIES |
ASTM B 370 : 2012 : REDLINE | Standard Specification for Copper Sheet and Strip for Building Construction |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
ASTM C 55 : 2017 : REDLINE | Standard Specification for Concrete Building Brick |
NFPA 285 : 2012 | FIRE TEST METHOD FOR EVALUATION OF FIRE PROPAGATION CHARACTERISTICS OF EXTERIOR NON-LOAD-BEARING WALL ASSEMBLIES CONTAINING COMBUSTIBLE COMPONENTS |
CGSB 37.54 : 1995 | POLYVINYL CHLORIDE ROOFING AND WATERPROOFING MEMBRANE |
UL 127:9ED 2011-04-21 | Standard for Factory-Built Fireplaces |
ASTM C 34 : 2017 : REDLINE | Standard Specification for Structural Clay Loadbearing Wall Tile |
ICC 400 : 2007 | STANDARD ON THE DESIGN AND CONSTRUCTION OF LOG STRUCTURES |
ASTM F 2200 : 2017 : REDLINE | Standard Specification for Automated Vehicular Gate Construction |
UL 14B:9ED 2008-12-15 | Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors |
AITC 117 : 2010 | STANDARD SPECIFICATIONS FOR STRUCTURAL GLUED LAMINATED TIMBER OF SOFTWOOD SPECIES |
FM 4474 : 2004(R2010) | EVALUATING THE SIMULATED WIND UPLIFT RESISTANCE OF ROOF ASSEMBLIES USING STATIC POSITIVE AND/OR NEGATIVE DIFFERENTIAL PRESSURES |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
ANSI A108/A118/A136.1 : 2017 | AMERICAN NATIONAL SPECIFICATIONS FOR THE INSTALLATION OF CERAMIC TILE |
UL 325:7ED 2017-05-19 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
UL 10C:3ED 2016-06-09 | Positive Pressure Fire Tests of Door Assemblies |
ANSI A118.1 : 1999 | SPECIFICATIONS FOR DRY-SET PORTLAND CEMENT MORTAR |
ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
ASTM C 199 : 1984 | TEST METHOD FOR PIER TEST FOR REFRACTORY MORTARS |
ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
ASTM D 4897 : 2001 | Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
UL 10A:21ED 2009-01-30 | Tin-Clad Fire Doors |
NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
ASTM C 1325 : 2017-02 | SPECIFICATION FOR NON-ASBESTOS FIBER-MAT REINFORCED CEMENTITIOUS BACKER UNITS |
ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
UL 555S:5ED 2014-02-13 | Smoke Dampers |
ALI ALCTV : 2011 | Standard For Automotive Lifts - Safety Requirements For Construction, Testing, And Validation |
NFPA 409 : 2016 | AIRCRAFT HANGARS |
ICC 2012 INT. WILDLAND U.I. CODE : 2012 | INTERNATIONAL WILDLAND-URBAN INTERFACE CODE |
NFPA 40 : 2016 | STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
NFPA 265 : 2015 | METHODS OF FIRE TESTS FOR EVALUATING ROOM FIRE GROWTH CONTRIBUTION OF TEXTILE OR EXPANDED VINYL WALL COVERINGS ON FULL HEIGHT PANELS AND WALLS |
ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
ASTM D 3679 : 2017 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 257 : 2017 | FIRE TEST FOR WINDOW AND GLASS BLOCK ASSEMBLIES |
NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
NFPA 268 : 2017 | TEST METHOD FOR DETERMINING IGNITIBILITY OF EXTERIOR WALL ASSEMBLIES USING A RADIANT HEAT ENERGY SOURCE |
UL 924:10ED 2016-05-09 | Emergency Lighting and Power Equipment |
ASTM C 932 : 2006 | Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering |
NFPA 111 : 2016 | STORED ELECTRICAL ENERGY EMERGENCY AND STANDBY POWER SYSTEMS |
ICC 2012 INT. EXIST. BUILDING CODE : 2012 | INTERNATIONAL EXISTING BUILDING CODE |
ASTM C 73 : 2017 : REDLINE | Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) |
ASTM D 2823 : 2005 | Standard Specification for Asphalt Roof Coatings, Asbestos Containing |
NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
ICC 2012 INT. PVT. SEWAGE DISP.CODE : 2012 | INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
ASTM D 41 : 2005 | Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing |
NFPA 82 : 2014 | INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT |
AWS D1.3 : 1998 ERRATA 1998 | STRUCTURAL WELDING CODE - SHEET STEEL |
ASTM D 2843 : 2016 : REDLINE | Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics |
NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
UL 580:5ED 2006-11-02 | Tests for Uplift Resistance of Roof Assemblies |
UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
UL 14C:8ED 2006-10-27 | Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs |
NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
ASTM C 547 : 2017 : REDLINE | Standard Specification for Mineral Fiber Pipe Insulation |
EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
ICC 2012 INT. PROPERTY MAINT. CODE : 2012 | INTERNATIONAL PROPERTY MAINTENANCE CODE |
ASTM D 6754 : 2002 | Standard Specification for Ketone Ethylene Ester Based Sheet Roofing |
NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
AITC 110 : 2001 | STANDARD APPEARANCE GRADES FOR STRUCTURAL GLUED LAMINATED TIMBER |
NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
NFPA 12A : 2015 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
ASTM D 2822 : 2005 | Standard Specification for Asphalt Roof Cement, Asbestos Containing |
NAAMM FP1001 : 2007 | GUIDE SPECIFICATIONS FOR DESIGN OF METAL FLAGPOLES |
FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
NFPA 13D : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
ASME A17.1 : 2016 | SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES |
ADM 1 : 2015 | ALUMINUM DESIGN MANUAL |
ASME B16.22 : 2013 | WROUGHT COPPER AND COPPER ALLOY SOLDER-JOINT PRESSURE FITTINGS |
AITC 113 : 2010 | STANDARD FOR DIMENSIONS OF STRUCTURAL GLUED LAMINATED TIMBER |
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
ICC 2012 INT. ENERGY CONSV. CODE : 2012 | INTERNATIONAL ENERGY CONSERVATION CODE |
ASTM C 474 : 2015 : REDLINE | Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction |
ASTM A 588/A588M : 2015 : REDLINE | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance |
NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
UL 1482:7ED 2011-04-25 | Solid-Fuel Type Room Heaters |
NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
HPVA HP 1 : 2016 | HARDWOOD AND DECORATIVE PLYWOOD |
NFPA 80 : 2016 | FIRE DOORS AND OTHER OPENING PROTECTIVES |
NFPA 253 : 2015 | STANDARD METHOD OF TEST FOR CRITICAL RADIANT FLUX OF FLOOR COVERING SYSTEMS USING A RADIANT HEAT ENERGY SOURCE |
NFPA 418 : 2016 | HELIPORTS |
CFR 49(PTS100-185) : 0 | TRANSPORTATION |
ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
UL 1897:7ED 2015-09-23 | Uplift Tests for Roof Covering Systems |
NFPA 105 : 2016 | SMOKE DOOR ASSEMBLIES AND OTHER OPENING PROTECTIVES |
ASTM C 954 : 2015-06 | SPECIFICATION FOR STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 MM) TO 0.112 IN. (2.84 MM) IN THICKNESS |
ASTM C 726 : 2017 : REDLINE | Standard Specification for Mineral Wool Roof Insulation Board |
ICC 300 : 2007 | BLEACHERS, FOLDING AND TELESCOPIC SEATING, AND GRANDSTANDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.