I.S. EN ISO 4892-1:2016
Current
The latest, up-to-date edition.
PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016)
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Requirements for laboratory exposure devices
6 Test specimens
7 Test conditions and procedure
8 Periods of exposure and evaluation of test results
9 Test report
Annex A (normative) - Procedures for measuring the
irradiance uniformity in the specimen exposure area
Annex B (informative) - Factors that decrease the degree
of correlation between artificial accelerated
weathering or artificial accelerated irradiation exposures
and actual-use exposures
Annex C (informative) - Solar spectral irradiance standards
Bibliography
Gives information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts.
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN ISO 4892-1 : 2000 | Identical |
| NBN EN ISO 4892-1 : 2016 | Identical |
| UNI EN ISO 4892-1 : 2002 | Identical |
| DIN EN ISO 4892-1:2016-10 | Identical |
| ISO 4892-1:2016 | Identical |
| UNE-EN ISO 4892-1:2017 | Identical |
| BS EN ISO 4892-1:2016 | Identical |
| NEN EN ISO 4892-1 : 2016 | Identical |
| SN EN ISO 4892-1 : 2001 | Identical |
| EN ISO 4892-1:2016 | Identical |
| NF EN ISO 4892-1 : 2016 | Identical |
| DIN EN ISO 4892-1:2001-09 | Identical |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ASTM G 156 : 2017 : REDLINE | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
| ISO/TR 19032:2006 | Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
| ISO 294-2:1996 | Plastics Injection moulding of test specimens of thermoplastic materials Part 2: Small tensile bars |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| ASTM G 130 : 2012 : REDLINE | Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.