I.S. EN ISO 19906:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
Hardcopy , PDF
09-15-2019
English
01-01-2010
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 General requirements and conditions
6 Physical environmental conditions
7 Reliability and limit states design
8 Actions and action effects
9 Foundation design
10 Man-made islands
11 Fixed steel structures
12 Fixed concrete structures
13 Floating structures
14 Subsea production systems
15 Topsides
16 Other ice engineering topics
17 Ice management
18 Escape, evacuation and rescue
Annex A (informative) - Additional information and guidance
Annex B (informative) - Regional information
Bibliography
Describes requirements and provides recommendations and guidance for the design, construction, transportation, installation and removal of offshore structures, related to the activities of the petroleum and natural gas industries in arctic and cold regions.
| DocumentType |
Standard
|
| Pages |
481
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN ISO 19906:2010 | Identical |
| ISO 19906:2010 | Identical |
| ISO 12494:2017 | Atmospheric icing of structures |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| ISO 19901-6:2009 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations |
| ISO 19901-2:2017 | Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria |
| ISO 19900:2013 | Petroleum and natural gas industries General requirements for offshore structures |
| NORSOK N-003:2017 | ACTIONS AND ACTIONS EFFECTS |
| AISC 325 : 2017 | STEEL CONSTRUCTION MANUAL |
| CSA S16 : 2014 | DESIGN OF STEEL STRUCTURES |
| SNIP 2.06.04-82 : 1982 | WAVE, ICE, AND SHIP LOADS AND EFFECTS ON HYDRAULIC STRUCTURES |
| API BULL 2V : 2004 | DESIGN OF FLAT PLATE STRUCTURES |
| ISO 19901-7:2013 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units |
| ASCE 4 98 : 2000 | SEISMIC ANALYSIS OF SAFETY-RELATED NUCLEAR STRUCTURES AND COMMENTARY |
| ISO 19903:2006 | Petroleum and natural gas industries Fixed concrete offshore structures |
| ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
| ISO 15544:2000 | Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response |
| NORSOK M 630 : REV 6 | MATERIAL DATA SHEETS AND ELEMENT DATA SHEETS FOR PIPING |
| ISO 2631-4:2001 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
| ISO 15027-1:2012 | Immersion suits Part 1: Constant wear suits, requirements including safety |
| ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
| ISO 19901-4:2016 | Petroleum and natural gas industries Specific requirements for offshore structures Part 4: Geotechnical and foundation design considerations |
| ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
| ASTM D 420 : 1998 | Guide to Site Characterization for Engineering, Design, and Construction Purposes |
| ACI 306R : 2016 | GUIDE TO COLD WEATHER CONCRETING |
| ISO 19902:2007 | Petroleum and natural gas industries Fixed steel offshore structures |
| ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASTM C 671 : 1994 | Standard Test Method for Critical Dilation of Concrete Specimens Subjected to Freezing (Withdrawn 2003) |
| ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
| CGSB 65.16 : 2005 | IMMERSION SUIT SYSTEMS |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 19901-1:2015 | Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| CSA S471 : 2004 | GENERAL REQUIREMENTS, DESIGN CRITERIA, THE ENVIRONMENT, AND LOADS |
| ISO 2631-5:2004 | Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocks |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| NS 3472 : 2001 | STEEL STRUCTURES - DESIGN RULES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.