I.S. EN ISO 15744:2008
Current
The latest, up-to-date edition.
HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 Machinery families
4.1 Applicability of this International Standard
4.2 Other equipment
5 Sound power level determination
5.1 General
5.2 Measurement surface
5.3 Calculation
6 Emission sound pressure level determination
6.1 A-weighted emission sound pressure level at
the work station
6.2 C-weighted peak emission sound pressure level
at the work station
7 Power tool installation and mounting during noise
tests
7.1 General
7.2 Loading devices
8 Loading and operating conditions
8.1 General
8.2 Orbital and random orbital sanders
8.3 Non-rotary percussive tools
8.4 Needle scalers
8.5 Rotary percussive tools
8.6 Ratcheting screwdrivers, impact wrenches and
Impulse wrenches
9 Measurement uncertainty
10 Information to be recorded
11 Test report
12 Declaration and verification of noise emission
values
Annex A (informative) Model test report
Annex B (informative) Model form for declared noise
emission values
Annex C (informative) Technical justification for
selection of measurement surface and method of
sound power calculation
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Describes methods for the measurement, determination and declaration of the noise emission from hand-held non-electric power tools.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN ISO 15744 : 2008 | Identical |
| UNE-EN ISO 15744:2008 | Identical |
| NS EN ISO 15744 : 2ED 2008 | Identical |
| BS EN ISO 15744:2002 | Identical |
| EN ISO 15744:2008 | Identical |
| SN EN ISO 15744 : 2008 | Identical |
| DIN EN ISO 15744:2008-11 | Identical |
| NF EN ISO 15744 : 2008 | Identical |
| UNI EN ISO 15744 : 2008 | Identical |
| ISO 15744:2002 | Identical |
| NBN EN ISO 15744 : 2009 | Identical |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 11546-2:1995 | Acoustics Determination of sound insulation performances of enclosures Part 2: Measurements in situ (for acceptance and verification purposes) |
| ISO/TR 11690-3:1997 | Acoustics Recommended practice for the design of low-noise workplaces containing machinery Part 3: Sound propagation and noise prediction in workrooms |
| ISO 7574-4:1985 | Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines |
| ISO 15667:2000 | Acoustics Guidelines for noise control by enclosures and cabins |
| ISO 8662-2:1992 | Hand-held portable power tools Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers |
| ISO 2787:1984 | Rotary and percussive pneumatic tools — Performance tests |
| ISO 8662-14:1996 | Hand-held portable power tools Measurement of vibrations at the handle Part 14: Stone-working tools and needle scalers |
| ISO 11203:1995 | Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| ISO 5391:2003 | Pneumatic tools and machines Vocabulary |
| ISO 8662-8:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 8: Polishers and rotary, orbital and random orbital sanders |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| ISO 8662-7:1997 | Hand-held portable power tools Measurement of vibrations at the handle Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
| IEC 60804:2000 | Integrating-averaging sound level meters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.