I.S. EN ISO 15156-2:2015&LC:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015)
Hardcopy , PDF
01-04-2021
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Purchasing information
6 Factors affecting the behaviour of carbon and low
alloy steels in H2Scontaining environments
7 Qualification and selection of carbon and low-alloy
steels with resistance to SSC, SOHIC and SZC
8 Evaluation of carbon and low alloy steels for their
resistance to HIC/SWC
9 Marking, labelling, and documentation
Annex A (normative) - SSC-resistant carbon and low
alloy steels (and requirements and recommendations
for the use of cast irons)
Annex B (normative) - Qualification of carbon and low-alloy
steels for H[2]S service by laboratory testing
Annex C (informative) - Determination of H[2]S partial
pressure
Annex D (informative) - Recommendations for determining p[H]
Annex E (informative) - Information that should be supplied
for material purchasing
Bibliography
Provides requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H[2]S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment.
| Committee |
TC 67
|
| DocumentType |
Standard
|
| Pages |
62
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. CORRECTED VERSION IS NOW AVAILABLE OF THIS STANDARD FROM 05-08-2019
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 15156-2 : 2016 | Identical |
| UNI EN ISO 15156-2 : 2009 | Identical |
| NEN EN ISO 15156-2 : 2015 | Identical |
| NBN EN ISO 15156-2 : 2015 | Identical |
| ISO 15156-2:2015 | Identical |
| BS EN ISO 15156-2:2015 | Identical |
| NF EN ISO 15156-2 : 2011 | Identical |
| NS EN ISO 15156-2 : 2015 | Identical |
| DIN EN ISO 15156-2:2015-12 | Identical |
| EN ISO 15156-2:2015 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ASTM A 602 : 1994 : R2018 | Standard Specification for Automotive Malleable Iron Castings |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| API 5CT : 2012 | CASING AND TUBING |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| SAE AMS 2430 : 2015 | SHOT PEENING |
| API 5L : 2012 | LINE PIPE |
| ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 15156-1:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| NACE MR 01 76 : 2012 | METALLIC MATERIALS FOR SUCKER-ROD PUMPS FOR CORROSIVE OILFIELD ENVIRONMENTS |
| ASTM A 524 : 1996 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| ISO 11960:2014 | Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.