I.S. EN ISO 1461:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS
Hardcopy , PDF
05-06-2023
English
01-01-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
4.1 General
4.2 Hot dip galvanizing bath
4.3 Information to be supplied by the purchaser
4.4 Safety
5 Acceptance inspection and sampling
6 Coating properties
6.1 Appearance
6.2 Thickness
6.3 Renovation
6.4 Adhesion
6.5 Acceptance criteria
7 Certificate of compliance
Annex A (normative) - Information to be supplied
Annex B (normative) - Safety and process requirements
Annex C (informative) - Renovation of uncoated or damaged
areas
Annex D (informative) - Determination of thickness
Annex E (informative) - Corrosion resistance of hot dip
galvanized coatings
Bibliography
Describes the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2% of other metals).
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNI EN ISO 1461 : 2009 | Identical |
| BS EN ISO 1461:2009 | Identical |
| NS EN ISO 1461 : 2009 | Identical |
| UNE-EN ISO 1461:2010 | Identical |
| EN ISO 1461:2009 | Identical |
| ISO 1461:2009 | Identical |
| SN EN ISO 1461:2009 | Identical |
| NF EN ISO 1461 : 2009 | Identical |
| NBN EN ISO 1461 : 2009 | Identical |
| NEN EN ISO 1461 : 2009 | Identical |
| ONORM EN ISO 1461 : 2009 | Identical |
| DIN EN ISO 1461:2009-10 | Identical |
| I.S. 436:2007 | FARM FENCING - TIMBER POST AND WIRE |
| I.S. 6:2004 | CONCRETE SEWER PIPES |
| I.S. 435-2:2017 | TIMBER POST AND RAIL ROADSIDE FENCING - PART 2: ERECTION OF FENCING BY EXCAVATION FOR POSTS |
| I.S. 435-3:2017 | TIMBER POST AND RAIL ROADSIDE FENCING - PART 3: ERECTION OF FENCING BY DRIVING OF POSTS |
| S.R. 82:2017 | SLATING AND TILING - CODE OF PRACTICE |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| ISO 3549:1995 | Zinc dust pigments for paints — Specifications and test methods |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 752:2004 | Zinc ingots |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| EN 746-4:2000 | Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| EN 13283:2002 | Zinc and zinc alloys - Secondary zinc |
| EN 1179:2003 | Zinc an zinc alloys - Primary zinc |
| ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing |
| EN 10163-3:2004 | Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 1460:1992 | Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.