I.S. EN ISO 14021:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENVIRONMENTAL LABELS AND DECLARATIONS - SELF-DECLARED ENVIRONMENTAL CLAIMS (TYPE 2 ENVIRONMENTAL LABELLING) (ISO 14021:2016)
Available format(s)
Hardcopy , PDF
Superseded date
09-08-2021
Superseded by
Language(s)
English
Published date
01-01-2016
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Objective of self-declared environmental claims
5 Requirements applying to all self-declared
environmental claims
6 Evaluation and claim verification requirements
7 Specific requirements for selected claims
Annex A (informative) - Simplified diagrammatic representation
of a recycling system
Bibliography
Defines requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. Also describes selected terms commonly used in environmental claims and gives qualifications for their use.
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN ISO 14021 : 2016 | Identical |
| SN EN ISO 14021:2016 | Identical |
| EN ISO 14021:2016 | Identical |
| NBN EN ISO 14021 : 2016 | Identical |
| NS EN ISO 14021 : 2016 | Identical |
| UNE-EN ISO 14021:2017 | Identical |
| UNI EN ISO 14021 : 2012 | Identical |
| DIN EN ISO 14021:2016-07 | Identical |
| BS EN ISO 14021:2016 | Identical |
| NEN EN ISO 14021 : 2016 | Identical |
| ONORM EN ISO 14021 : 2012 | Identical |
| ISO 14021:2016 | Identical |
| ISO 14853:2016 | Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system Method by measurement of biogas production |
| IEC 60661:1999+AMD1:2003+AMD2:2005 CSV | Methods for measuring the performance of electric household coffee makers |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 5512 : 1996 | Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002) |
| IEC 61121:2012 | Tumble dryers for household use - Methods for measuring the performance |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| IEC 60350:1999+AMD1:2005+AMD2:2008 CSV | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
| ISO/TR 14049:2012 | Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis |
| ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
| ISO/TS 14067:2013 | Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication |
| ASTM D 5208 : 2014 : REDLINE | Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| ISO 5151:2017 | Non-ducted air conditioners and heat pumps — Testing and rating for performance |
| ASTM D 5271 : 2002 | Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System (Withdrawn 2011) |
| ISO 11469:2016 | Plastics — Generic identification and marking of plastics products |
| ISO/IEC Guide 14:2003 | Purchase information on goods and services intended for consumers |
| DIN V 54900-3:1998-09 | TESTING OF THE COMPOSTABILITY OF PLASTICS - PART 3: TESTING UNDER PRACTICE-RELEVANT CONDITIONS AND TESTING OF QUALITY OF THE COMPOSTS |
| ASTM D 5525 : 1994 : REV A | Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002) |
| ISO 9408:1999 | Water quality — Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer |
| IEC 60379:1987 | Methods for measuring the performance of electric storage water-heaters for household purposes |
| ASTM D 5509 : 1996 | Standard Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002) |
| ASTM D 3826 : 1998 | Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test |
| IEC 60530:1975 | Methods for measuring the performance of electric kettles and jugs for household and similar use |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| ASTM D 5247 : 1992 | Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms (Withdrawn 2004) |
| ASTM D 5833 : 2012 | Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| ISO 8561:1995 | Household frost-free refrigerating appliances Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation Characteristics and test methods |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 7827:2010 | Water quality Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium Method by analysis of dissolved organic carbon (DOC) |
| ASTM D 5209 : 1992 | Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004) |
| ASTM D 5338 : 2015 : REDLINE | Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures |
| ISO 14020:2000 | Environmental labels and declarations — General principles |
| ASTM D 5437 : 1993 | Practice for Weathering of Plastics Under Marine Floating Exposure (Withdrawn 1999) |
| ISO 13253:2017 | Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance |
| ASTM D 6003 : 1996 | Standard Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005) |
| ANSI/ISO/ASQ E14001:2004 | Quality Systems For Environmental Data And Technology Programs - Requirements With Guidance For Use |
| DIN V 54900-2:1998-09 | TESTING OF THE COMPOSTABILITY OF PLASTICS - PART 2: TESTING OF THE COMPLETE BIODEGRADABILITY OF PLASTICS IN LABORATORY TESTS |
| BS 7500:1995 | Specification for marking of recycled paper board |
| ASTM D 5834 : 1995 | Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004) |
| ISO 10707:1994 | Water quality Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds Method by analysis of biochemical oxygen demand (closed bottle test) |
| ISO 14025:2006 | Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
| IEC 61429:1995 | Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| IEC 60675:1994+AMD1:1998 CSV | Household electric direct-acting room heaters - Methods for measuring performance |
| IEC 60531:1999 | Household electric thermal storage room heaters - Methods for measuring performance |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| IEC 60436:2015 | Electric dishwashers for household use - Methods for measuring the performance |
| ISO 14852:1999 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide |
| ISO 14851:1999 | Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by measuring the oxygen demand in a closed respirometer |
| AS 4082-1992 | Recycled paper - Glossary of terms |
| ISO 14855-1:2012 | Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method |
| IEC 60705:2010+AMD1:2014 CSV | Household microwave ovens - Methods for measuring performance |
| EN 45001 : 1989 | GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.