I.S. EN ISO 11252:2013
Current
The latest, up-to-date edition.
LASERS AND LASER-RELATED EQUIPMENT - LASER DEVICE - MINIMUM REQUIREMENTS FOR DOCUMENTATION (ISO 11252:2013)
Hardcopy , PDF
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Units
5 Technical data sheet
6 Information for the user
7 Marking and labelling
Annex A (informative) - Model of technical data sheet
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2006/42/EC
(Machinery)
Defines the minimum documentation, marking and labelling for all laser products classified in accordance with IEC 60825-1 including laser diodes and all laser devices defined in ISO 11145.
| DevelopmentNote |
Supersedes I.S. EN 31252. (02/2005)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS EN ISO 11252:2013 | Identical |
| NS EN ISO 11252 : 2013 | Identical |
| NBN EN ISO 11252 : 2013 | Identical |
| DIN EN ISO 11252:2014-02 | Identical |
| SN EN ISO 11252 : 2013 | Identical |
| NF EN ISO 11252 : 2013 | Identical |
| UNE-EN ISO 11252:2013 | Identical |
| NEN EN ISO 11252 : 2013 | Identical |
| ISO 11252:2013 | Identical |
| UNI EN ISO 11252 : 2013 | Identical |
| EN ISO 11252:2013 | Identical |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| ISO 11146-1:2005 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 1: Stigmatic and simple astigmatic beams |
| ISO 13694:2015 | Optics and photonics Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution |
| ISO 11146-2:2005 | Lasers and laser-related equipment Test methods for laser beam widths, divergence angles and beam propagation ratios Part 2: General astigmatic beams |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| IEC 60825-4:2006+AMD1:2008+AMD2:2011 CSV | Safety of laser products - Part 4: Laser guards |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 11670:2003 | Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 15367-1:2003 | Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 1: Terminology and fundamental aspects |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| IEC TR 60825-14:2004 | Safety of laser products - Part 14: A user's guide |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 13695:2004 | Optics and photonics — Lasers and laser-related equipment — Test methods for the spectral characteristics of lasers |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 17526:2003 | Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers |
| IEC 62471:2006 | Photobiological safety of lamps and lamp systems |
| ISO 12005:2003 | Lasers and laser-related equipment Test methods for laser beam parameters Polarization |
| ISO 15367-2:2005 | Lasers and laser-related equipment Test methods for determination of the shape of a laser beam wavefront Part 2: Shack-Hartmann sensors |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| ISO 11145:2016 | Optics and photonics Lasers and laser-related equipment Vocabulary and symbols |
| ISO 11553-2:2007 | Safety of machinery Laser processing machines Part 2: Safety requirements for hand-held laser processing devices |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 11553-3:2013 | Safety of machinery — Laser processing machines — Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2) |
| ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.