I.S. EN ISO 10472-5:2008
Current
The latest, up-to-date edition.
SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Definitions
4 Hazards
5 Safety requirements and/or measures for the hazards
identified in clause 4
5.1 General
5.2 Mechanical hazards
5.2.1 Bed and cylinder ironers
5.2.2 All types of feeding, folding and multi-function
machines
5.3 Electrical hazards
5.4 Thermal hazards
5.4.1 Heated bed or rollers and heating system
5.4.2 Heat radiation to the workplace
5.4.3 Ironed work
5.4.4 Ignition of the work
5.5 Hazards generated by noise
5.6 Hazards caused by fire and explosion from a
gas-heated machine
5.7 Hazards caused by harmful fumes from gas-heated
machines
5.8 Hazards due to neglect of ergonomic principles
in machine design
5.9 Hazards caused by unexpected ejection of fluids
5.10 Failure of control systems
6 Verification of safety requirements and/or measures
7 Information concerning machine use
7.1 Instruction handbook
7.2 Warning signs
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Describes most important hazards connected with flatwork ironers, feeders and folders, eg cylinder and bed ironers, flatwork feeding machines, flatwork folding machines and multi-function machines. Not applicable to ancillary equipment such as chemical supply pumps, steam valves and supply pipe work vent, work feed and discharge systems and ducting to the atmosphere.
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 10472-5:1997 | Identical |
| BS EN ISO 10472-5:2008 | Identical |
| NEN EN ISO 10472-5 : 2008 | Identical |
| UNE-EN ISO 10472-5:2009 | Identical |
| DIN EN ISO 10472-5:2009-09 | Identical |
| NBN EN ISO 10472-5 : 2009 | Identical |
| EN ISO 10472-5:2008 | Identical |
| UNI EN ISO 10472-5 : 2009 | Identical |
| NS EN ISO 10472-5 : 2ED 2008 | Identical |
| NF EN ISO 10472-5 : 2009 | Identical |
| SN EN ISO 10472-5 : 2009 | Identical |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| IEC 60335-2-44:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| ISO 11111:1995 | Safety requirements for textile machinery |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.