I.S. EN ISO 10472-2:2008
Current
The latest, up-to-date edition.
SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 2: WASHING MACHINES AND WASHER-EXTRACTORS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Hazards
5 Safety requirements and/or measures for the hazards
identified in clause
5.1 General
5.2 Mechanical hazards
5.2.1 Rotating cage
5.2.2 Manual drum doors
5.2.3 Doors (cage and drum)
5.2.4 Cage doors
5.2.5 Power-operated drum doors
5.2.6 Loss of stability
5.2.7 Suspended washer-extractors
5.2.8 Falling load and loading devices
5.3 Electrical hazards
5.4 Thermal hazards
5.4.1 Hot liquor
5.4.2 Hot surfaces
5.4.3 Heat energy
5.4.4 Viewing panels
5.5 Hazards generated by noise
5.6 Hazards associated with materials and substances
5.6.1 Aggressive chemical action
5.6.2 Fire and explosion
5.6.3 Biological hazards
5.7 Hazards due to neglect of ergonomic principles in
machines design
5.8 Failure of energy supply and control systems
5.8.1 Failure of energy supply
5.8.2 Failure of control systems
5.9 Hazards caused by unexpected ejection of machine parts
5.10 Particular hazards associated with barrier machines
5.11 Particular hazards associated with tilting machines
5.11.1 Tilting controlled manually
5.11.2 Automatic tilting
5.11.3 Loading and unloading
5.11.4 Overturning
5.11.5 Maintenance
6 Verification of safety requirements and/or measures
7 Information concerning machine use
Annex ZA (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive 2006/42/EC
Specifies the most significant hazards associated with washing machines and washer-extractors of all configurations having a net usable cage volume > 60 l.
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 10472-2 : 2009 | Identical |
| DIN EN ISO 10472-2:2009-10 | Identical |
| NEN EN ISO 10472-2 : 2008 | Identical |
| NS EN ISO 10472-2 : 2ED 2008 | Identical |
| EN ISO 10472-2:2008 | Identical |
| UNE-EN ISO 10472-2:2008 | Identical |
| BS EN ISO 10472-2:2008 | Identical |
| ISO 10472-2:1997 | Identical |
| UNI EN ISO 10472-2 : 2009 | Identical |
| SN EN ISO 10472-2 : 2009 | Identical |
| NBN EN ISO 10472-2 : 2009 | Identical |
| EN 1037:1995+A1:2008 | Safety of machinery - Prevention of unexpected start-up |
| ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60335-2-7:2008+AMD1:2011+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-7:Particular requirements for washing machines |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| ISO 13853:1998 | Safety of machinery Safety distances to prevent danger zones being reached by the lower limbs |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 1760-2:2001+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.