I.S. EN IEC 62485-1:2018
Current
The latest, up-to-date edition.
SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 1: GENERAL SAFETY INFORMATION
Hardcopy , PDF
English
05-22-2018
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General information
5 Protection against electric shock
6 Disconnection and separation
7 Commissioning and putting batteries into operation
8 Limit values and correction factors
9 Provisions against explosion hazards
10 Provision against electrolyte hazards
11 Marking, labeling and instructions
12 Transport and storage
13 Disposal and environmental aspects
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Defines the basic requirements for secondary batteries and battery installations.
| DevelopmentNote |
Supersedes I.S. EN 50272-1. For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (06/2018)
|
| DocumentType |
Standard
|
| ISBN |
978-2-8322-2614-8
|
| Pages |
52
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document.
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN IEC 62485-1:2018 | Identical |
| IEC 62259:2003 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination |
| IEC 60896-11:2002 | Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests |
| IEC 61960:2011 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications |
| IEC TR 61438:1996 | Possible safety and health hazards in the use of alkaline secondary cells and batteries - Guide to equipment manufacturers and users |
| IEC 60896-21:2004 | Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test |
| HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
| EN 60993:2002 | Electrolyte for vented nickel-cadmium cells |
| EN 62485-3:2014 | Safety requirements for secondary batteries and battery installations - Part 3: Traction batteries |
| IEC 61982:2012 | Secondary batteries (except lithium) for the propulsion of electric road vehicles - Performance and endurance tests |
| IEC 60952-3:2013 | Aircraft batteries - Part 3: Product specification and declaration of design and performance (DDP) |
| IEC 62877-2:2016 | Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water |
| IEC 61056-2:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking |
| IEC 60952-2:2013 | Aircraft batteries - Part 2: Design and construction requirements |
| IEC TR 62188:2003 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Design and manufacturing recommendations for portable batteries made from sealed secondary cells |
| IEC 61951-2:2017 | Secondary cells and batteries containing alkaline or other non acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 2: Nickel-metal hydride |
| IEC 61951-1:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary sealed cells and batteries for portable applications - Part 1: Nickel-Cadmium |
| IEC 60896-22:2004 | Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements |
| IEC 61056-1:2012 | General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test |
| EN 61429:1996/A11:1998 | MARKING OF SECONDARY CELLS AND BATTERIES WITH THE INTERNATIONAL RECYCLING SYMBOL ISO 7000-1135 AND INDICATIONS REGARDING DIRECTIVES 93/86/EEC AND 91/157/EEC |
| IEC 60952-1:2013 | Aircraft batteries - Part 1: General test requirements and performance levels |
| IEC 60623:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells |
| IEC 61959:2004 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries |
| IEC 60095-1:2006 | Lead-acid starter batteries - Part 1: General requirements and methods of test |
| IEC 60622:2002 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.