I.S. EN 868-7:2017
Current
The latest, up-to-date edition.
PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Information to be supplied by the manufacturer
Annex A (informative) - Details of significant technical
changes between this European Standard and the
previous edition
Annex B (normative) - Method for the determination
of water repellency
Annex C (normative) - Method for the determination
of pore size
Annex D (normative) - Method for the determination
of regularity of seal adhesive coatings on paper
Annex E (normative) - Method for the determination
of mass per unit area of uncoated paper and
adhesive coating
Annex F (normative) - Method for the determination
of seal strength and mode of specimen failure
Annex G (informative) - Repeatability and reproducibility
of test methods
Bibliography
Defines test methods and values for sealable adhesive coated paper manufactured from paper complying with EN 868-6, used as sterile barrier systems and/or packaging systems that are intended to maintain sterility of terminally sterilized medical devices to the point of use.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 868-7:2017 | Identical |
| UNE-EN 868-7:2009 | Identical |
| BS EN 868-7:2017 | Identical |
| NS EN 868-7 : 2017 | Identical |
| NEN EN 868-7 : 2017 | Identical |
| UNI EN 868-7 : 2009 | Identical |
| EN 868-7:2017 | Identical |
| NF EN 868-7 : 2017 | Identical |
| NBN EN 868-7 : 2009 | Identical |
| UNE-EN 868-7:2017 | Identical |
| ISO 1974:2012 | Paper — Determination of tearing resistance — Elmendorf method |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 6588-2:2012 | Paper, board and pulps Determination of pH of aqueous extracts Part 2: Hot extraction |
| EN 21974:1994 | Paper - Determination of tearing resistance (Elmendorf method) (ISO 1974:1990) |
| ISO 2758:2014 | Paper Determination of bursting strength |
| EN 20535:1994 | Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:1991) |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 9197:2016 | Paper, board and pulps Determination of water-soluble chlorides |
| EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
| EN ISO 1924-2:2008 | Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008) |
| EN ISO 536:2012 | Paper and board - Determination of grammage (ISO 536:2012) |
| ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| EN 20187:1993 | Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990) |
| ISO 3781:2011 | Paper and board — Determination of tensile strength after immersion in water |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 3689:1983 | Paper and board — Determination of bursting strength after immersion in water |
| EN ISO 2758:2014 | Paper - Determination of bursting strength (ISO 2758:2014) |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 535:2014 | Paper and board — Determination of water absorptiveness — Cobb method |
| ISO 9198:2001 | Paper, board and pulp Determination of water-soluble sulfates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.