I.S. EN 62701:2014
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - RECYCLED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEARS
Hardcopy , PDF
02-01-2016
English
12-03-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Properties of oil - Refining and stability
5 Classification, identification, general delivery
requirements
6 Properties, their significance and test methods
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Describes requirements for recycled mineral insulating oils intended for use in transformers, switchgear, and similar electrical equipment in which oil is required for insulation and heat transfer.
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| EN 62701:2014 | Identical |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN 60156:1995 | Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
| IEC 62021-1:2003 | Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration |
| EN 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
| IEC 62021-2:2007 | Insulating liquids - Determination of acidity - Part 2: Colourimetric titration |
| IEC 61125:1992 | Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| IEC 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
| IEC 60156:1995 | Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
| EN 61125:1993/A1:2004 | UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY |
| EN ISO 12185:1996 | Crude petroleum and petroleum products - Determination of density - Oscillating U-tube method (ISO 12185:1996) |
| EN 14210:2003 | Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
| EN 61619:1997 | Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography |
| HD 488 : 200S3 | GASSING OF INSULATING LIQUIDS UNDER ELECTRICAL STRESS AND IONIZATION |
| EN ISO 14596:2007 | Petroleum products - Determination of sulfur content - Wavelength-dispersive X-ray fluorescence spectrometry (ISO 14596:2007) |
| IEC 62535:2008 | Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
| EN 61620:1999 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| IEC 61868:1998 | Mineral insulating oils - Determination of kinematic viscosity at very low temperatures |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN 61198:1994 | Mineral insulating oils - Methods for the determination of 2-furfural and related compounds |
| EN 60814:1997 | Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
| EN 62021-2 : 2007 | INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION |
| EN 62535:2009 | Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
| EN 60970:2007/corrigendum:2008 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| EN 62697-1:2012 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| IEC 60970:2007 | Insulating liquids - Methods for counting and sizing particles |
| EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 62697-1:2012 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| EN 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| IEC 60666:2010 | Detection and determination of specified additives in mineral insulating oils |
| IEC 61620:1998 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| IEC 60867:1993 | Insulating liquids - Specifications for unused liquids based on synthetic aromatic hydrocarbons |
| IEC 60814:1997 | Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
| IEC 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| EN 61868:1999 | Mineral insulating oils - Determination of kinematic viscosity at very low temperatures |
| ISO 14596:2007 | Petroleum products — Determination of sulfur content — Wavelength-dispersive X-ray fluorescence spectrometry |
| ASTM D 7150 : 2013 : REDLINE | Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress |
| IEC 61619:1997 | Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography |
| IEC 61198:1993 | Mineral insulating oils - Methods for the determination of 2-furfural and related compounds |
| EN 62021-1:2003 | Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration |
| EN 60666 : 2010 | DETECTION AND DETERMINATION OF SPECIFIED ADDITIVES IN MINERAL INSULATING OILS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.