I.S. EN 62271-209:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 209: CABLE CONNECTIONS FOR GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV - FLUID-FILLED AND EXTRUDED INSULATION CABLES - FLUID-FILLED AND DRY-TYPE CABLE-TERMINATIONS
Hardcopy , PDF
08-02-2019
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Limits of supply
4.1 General
4.2 Over-voltage protection
5 Rating
5.1 General
5.2 Rated voltage
5.3 Rated insulation level
5.4 Rated normal current and temperature rise
5.5 Rated short-time and peak withstand currents and rated
duration of short circuit
5.6 Rated filling pressure of insulating gas in the cable
connection enclosure
6 Design and construction requirements
6.1 Pressure withstand requirements
6.2 Mechanical forces on cable-terminations
7 Standard dimensions
7.1 Fluid-filled cable-terminations
7.2 Dry-type cable-terminations
7.3 Three-phase cable-termination enclosure
8 Tests
8.1 General
8.2 Dielectric type tests of cable-terminations
8.2.1 General
8.2.2 Dielectric type test of cable-terminations in a single
phase enclosure
8.2.3 Dielectric type test of cable-termination in a three phase
enclosure
8.3 Tests after cable system installation
9 Information to be given with enquiries, tenders and orders
10 Rules for transport, storage, erection, operation and maintenance
Annex ZA (normative) - Normative references to international
publications with their corresponding
European publications
Annex ZB (informative) - A-deviations
Describes the connection assembly of fluid-filled and extruded cables to gas-insulated metal enclosed switchgear (GIS), in single- or three-phase arrangements where the cable-terminations are fluid-filled or dry type and there is a separating insulating barrier between the cable insulation and the gas insulation of the switchgear.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 62271-209 : 2008 | Identical |
| BS EN 62271-209:2007 | Identical |
| EN 62271-209:2007 | Identical |
| IEC 62271-209:2007 | Identical |
| IEC 60038:2009 | IEC standard voltages |
| EN 62271-203:2012 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| IEC 62271-203:2011 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| IEC 60141-1:1993 | Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.