I.S. EN 62135-1:2015
Current
The latest, up-to-date edition.
RESISTANCE WELDING EQUIPMENT - PART 1: SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURE AND INSTALLATION
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Environmental conditions
5 Tests
6 Protection against electric shock
7 Thermal requirements
8 Abnormal operation
9 Provisions against mechanical hazards
10 Instructions and markings
Annex A (informative) - Nominal voltages of
supply networks
Annex B (normative) - Construction of supply
circuit terminals
Annex C (normative) - Touch current measurement
in fault condition
Annex D (informative) - Extrapolation of temperature
to time of shutdown
Annex E (informative) - Example of risk analysis and
safety level requirement
Annex F (informative) - Indirect contact protection in
resistance welding equipment
Bibliography
Annex ZA (normative) - Normative references
to international publications with their
corresponding European publications
Pertains to equipment for resistance welding and allied processes and includes single and multiple welding stations which may be manually or automatically loaded and/or started.
| DevelopmentNote |
Supersedes I.S. EN 50063. (12/2008) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
82
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 62135-1:2015/AC:2016-02 | Identical |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC TS 61201:2007 | Use of conventional touch voltage limits - Application guide |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| ISO 8205-2:2002 | Water-cooled secondary connection cables for resistance welding Part 2: Dimensions and requirements for single-conductor connection cables |
| IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
| ISO 8205-1:2002 | Water-cooled secondary connection cables for resistance welding Part 1: Dimensions and requirements for double-conductor connection cables |
| ISO 5828:2001 | Resistance welding equipment Secondary connecting cables with terminals connected to water-cooled lugs Dimensions and characteristics |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60755:2017 | General safety requirements for residual current operated protective devices |
| IEC 62135-2:2015 | Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| IEC 60050-851:2008 | International Electrotechnical Vocabulary (IEV) - Part 851: Electric welding |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 60664-3:2017 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| ISO 5826:2014 | Resistance welding equipment — Transformers — General specifications applicable to all transformers |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.