I.S. EN 62024-1:2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
HIGH FREQUENCY INDUCTIVE COMPONENTS - ELECTRICAL CHARACTERISTICS AND MEASURING METHODS - PART 1: NANOHENRY RANGE CHIP INDUCTOR
Hardcopy , PDF
01-17-2021
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Inductance, Q-factor and impedance
3.1 Inductance
3.1.1 Measuring circuit
3.1.2 Mounting of the inductor to the test fixture
3.1.3 Measurement method and calculation
3.1.4 Notes on measurement
3.2 Quality factor
3.2.1 Measurement method
3.2.2 Measurement circuit
3.2.3 Mounting of the inductor
3.2.4 Methods of measurement and calculation
3.2.5 Notes on measurement
3.3 Impedance
3.3.1 Measurement method
3.3.2 Measurement circuit
3.3.3 Measurement method and calculation
3.3.4 Notes on measurement
4 Resonance frequency
4.1 Self-resonance frequency
4.2 Minimum output method
4.2.1 Measurement circuit
4.2.2 Mounting the inductor for test
4.2.3 Measuring method
4.2.4 Note on measurement
4.3 Reflection method
4.3.1 Measurement circuit
4.3.2 Mounting the inductor for test
4.3.3 Measurement method
4.3.4 Notes on measurement
4.4 Measurement by analyser
4.4.1 Measurement by impedance analyser
4.4.2 Measurement by network analyser
5 DC resistance
5.1 Measuring circuit (Bridge method)
5.2 Measuring method and calculation formula
5.3 Precaution for measurement
5.4 Measuring temperature
Annex A (normative) Mounting method for a surface mounting coil
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Describes electrical characteristics and measuring methods for the nanohenry range chip inductor that is normally used in high frequency (over 100 kHz) range.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| IEC 62024-1:2008 | Identical |
| DIN EN 62024-1:2008-10 | Identical |
| UNE-EN 62024-1:2003 | Identical |
| EN 62024-1:2008 | Identical |
| NBN EN 62024-1 : 2008 | Identical |
| NF EN 62024-1 : 2013 | Identical |
| BS EN 62024-1:2008 | Identical |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| ISO 6353-3:1987 | Reagents for chemical analysis — Part 3: Specifications — Second series |
| ISO 9453:2014 | Soft solder alloys Chemical compositions and forms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.